                     --- TFTPTOOL ---

Introduction:
=============
TFTPtool is a special heavily canibalized version of the UTPS which will run on
any PC, and allow you to download firmware into older sets without having to install
a TFTP server on the BCM.

The UTPS downloads firmware into the IP sets using a proprietary download protocol known as UFTP.
Support for this protocol was introduced in the set firmware with pre General Availability set
firmware release 0.70.  Any set that has a firmware load older than 0.70 is only capable of
downloading using the TFTP (Trivial File Transfer Protocol).

A TFTP server is not included with the BCM product since the license required to do so would
add several hundred dollars to the product.  The system administrator "stuck" with old sets
can however download a freeware TFTP server from the WWW.  For example, an excellent
multi-threaded TFTP server can be downloaded from http://SolarWinds.Net

Installation:
=============
1) Extract all files from "tftptool.zip" to any directory on a PC.
2) If you have more recent firmware files than B25, overwrite I2004.rom and I2002.rom.
3) If you are using the SolarWinds TFTP server, configure it so that:
    The TFTP Root directory points to the directory containing the above files.
    Security is set to both Transmit and Receive

Downloading:
============
1) Make sure that the TFTP server is running.
2) Launch the tftptool.
3) Configure the IP set "S1 IP" field to be the PC's IP address.
4) Configure the IP set "GW IP" field so that the packets can reach S1.
5) Configure the IP set "S1 Port" to 7000.

The set will connect to the tftp tool and upgrade it's firmware.
You can monitor the upgrade process bar in the TFTP window.
Once the download is complete, reconfigure the IP set so that it
can connect to the BCM.

