Software Update Name: BCM450.R100.BCM-to-IPO-Migration-131

Applicable H/W Platforms: BCM450

Applicable S/W Platforms: 8.0.1.00, 8.0.1.05

Category: GEN 

Installation Recommendations:
This update should be applied to all new installs of BCM450 R1
systems if they want to Migrate the IP Sets from BCM to IPO. 
After patch is applied, use Application launcher to 
install new version of Business Element Manager.

Components and Versions:

   bcmEMcartridge BCM450R1.3.18
   iptelprovideragent 2.0.331.28.108
   mof-db 2.16.11.43
   utps 2.0.328.52.107

Dependencies: 
Required Updates: 
	- BCM450.R100.SU.System-016.201110 or later

Updates should be applied in the following order:- 
	- BCM450.R100.SU.System-016.201110 or later
	- BCM450.R100.BCM-to-IPO-Migration-131

Product Dependencies: None 

Size: 31.10 MB

System Impact: 
Time to apply approximately 10 minutes

Does update application force reboot: Yes

Other Impacts: None

Limitations: None

Update Removable: No

Description:
------------
The following issues are addressed:

1.Migrate the existing 1120, 1140, 1220 and 1230 series UNIStim sets 
to SIP based sets.Sets should also redirect themselves to the IPO 
when BCM/SRG is replaced with an IPO without manual intervention.

When the TFTP server is ready user can navigate to a specific area of
EM(Configuration->Resources->IpSets->Migrate Sets to IPO )and provide
the IPO IP address. This TFTP address is persistent and can retain its
value across BCM/SRG reboot and EM restart.

DHCP server should be turned OFF in case IP sets are in DHCP ON mode 
and user wants to use a different DHCP server (other then BCM or Third
party DHCP server) just before actual migration starts.

User should press the "Migrate Now" button to start actual migration
process and all supported sets will reboot.Upon reboot UNIStim sets
will be able to send Read Request to the IPO (provisioned IP address)
and download the configuration files. Sets are capable of reading 
configuration files and download SIP firmware and redirect themselves to an 
IP as per device configuration.
wi00968682


This update includes the content of the following superseded updates:

BCM450.R100.UTPS-109
--------------------
1. A Bluetooth headset can loose connectivity with its paired IP set.
The only way to make it work is to unpair the device, turn off 
Bluetooth on the phone and exit. Then go back in and turn on 
Bluetooth and repeat the pairing sequence.

Inclusion of new UNIStim4.2 firmware solves this issue.
0623C7M,0624C7M and 0625C7M for IP phones 1110, 1120e and 1140e respectively.
062AC7M for Ip phones 1210, 1220 and 1230.
Q02088099


BCM450.R100.UTPS-104
---------------------
1.Inclusion of UNIStim 4.1 firmware release for IP sets
1110/1120E/1140E/1210/1220/1230/2007
Q02124398-01 


BCM450.R100.UTPS-83
---------------------
1.Unable to add the 4th KEM to i2004 sets
When 4th KEM is added to i2004 phase 2 sets, the IP set resets.
This was caused by CoreTel engine sending the messages at a faster rate
than UTPS was able to buffer the messages and send them to the IP set.
The transmit buffer size in UTPS is increased to address the issue.  
Q02067394 

2.i2004 set goes back to default DSCP value for signaling after being restarted
The Unistim terminals are updated with the new DSCP values at every 
boot up to address the issue.
Q01967579-02

 

BCM450.R100.UTPS-73
---------------------

1.i2007 volume fluctuates during calls when using headset 0621C4V 
The issue is with Echo cancellation within the firmware, as it should not lower 
the volume but cut down background noise.

Inclusion of UNIStim3.3 firmware for IP set solves the issue.
0604DCL for Phase II IP Phones (2001, 2002 & 2004).
0621C6P for IP Phone 2007.
0623C6R, 0624C6R, 0625C6R for IP Phone 1110e, 1120e and 1140e respectively.
062AC6R for 1210,1220 and 1230
Q01988838-02

BCM450.R100.UTPS-31
-------------------

1. Inclusion of the UNIStim Firmware Release 3.2 for IP Phones:
0604DCJ for Phase II IP Phones (2001, 2002 & 2004).
0621C6M for IP Phone 2007.
0623C6O, 0624C6O, 0625C6O for IP Phone 1110, 1120E and 1140E respectively.
062AC6O for IP Phone 1210, 1220, and 1230.
Q01998305

2. IP 2004 set with 2 KEMS attached is not registering and keep resetting
The UNIStim3.2 firmware (0604DCJ) fixes the problem with multiple 
KEMs booting up. This firmware is included in this update. 
Q01957461

3. Anomaly with headsets on 1120e IP Phone 
This problem is experienced with the headsets connected to a 1120e IP Phone.
Incoming calls ring on both headset and the phone itself. Also, if the user is on a 
call and a second call comes in the ring tone is heard in the headset as well as 
the set, instead of just the set.
The UNIStim3.2 firmware (0624C6O) fixes the problem which is included in 
this update.
Q01978210

BCM450.R100.UTPS-28
----------------------

1. No speech path after using Hot Desking
This problem is seen when the user tries to invoke/cancel HotDesking when the
IPSet involved in this scenario is in Call Alerting state. The fix for this 
issue is to disallow HotDesking when the IPSets are in 'Call Alerting' state.
Q01809601-01

BCM450.R100.UTPS-7
--------------------

1. The last "L" of the "NEWCALL" softkey is shifted to the next key.
Support has been added so that all the softkey labels which are displayed
on 1110, 1120, 1140 IPSets are in lower case except for the first character.
Q01930775





