NOTE: If the system has been upgraded to BCM Release 5.0, install the "Factory Image Upgrade"
for Release 5.0 FIRST before installing any Smart Updates.


Software Update Name: BCM450.R500.SU.System-003.201002

Applicable H/W Platforms: BCM450

Applicable S/W Platforms: 9.0.1.00

Category: GEN

Installation Recommendations:
This update should be applied to all new installs of BCM450 Release 5.0. 
Existing installations should have this update applied if they are experiencing any 
of the issues that are corrected. There is no need to schedule specific maintenance 
to apply this upgrade if there are no reported issues. In those cases, systems should
be updated at the next regular service opportunity.

The Element Manager must be downloaded and installed after this update is applied if
the version of Element Manger currently being used is not 61.0.0.

After application of this update, the current Element Manager session used to apply the update 
will need to be closed and re-opened in order to download the latest Element Manager cartridge.

Components & Versions:

   bcmEMcartridge BCM450R5.aa47
   cfs 5.0.125
   core-telephony 5.0.67
   core-telephony-provider 5.0.527
   cte 5.1.1.388
   cteapps-obt 5.1.3.184
   dhcp 4.1.0p1.9
   dhcp-provider 5.0.201
   dialogger 45.1.2.589
   element-manager 61.0.0.271
   element-manager-docs 5.0.36
   feps 5.1.6.564
   gap 5.1.3.249
   initrd 1.22.245
   iptelprovideragent 5.0.525
   lan-provider 5.0.315
   license-provider 5.0.527
   log-provider 5.0.519
   mailsend 5.0.7
   modemcc 52.0.522
   mof-db 1.29.414
   mps 5.0.540
   nnu 45.0.400
   nnu-pdrd 45.2.610
   pal 5.0.212
   psm 5.1.1.208
   recovery-config 5.0.236
   remotex 5.0.89
   scd 5.1.1.594
   set-template-provider 5.0.210
   software-management 5.1.2.602
   src 5.1.3.110
   system-provider 5.0.530
   system-release 9.0.1.30.594
   voicemail 50.1.2.549
   webpage 5.1.1.304

Constituent Updates:
===================

New updates for this SU:
-------------------------
BCM450.R500.DHCP-12
BCM450.R500.FEPS-11*
BCM450.R500.Call-Recording-6*
BCM450.R500.APP-Launcher-5*

* It has not been released as an 'atomic' patch


Updates from previous SU:
--------------------------
BCM450.R500.SOFTWARE-MANAGEMENT-10
BCM450.R500.FEPS-9
BCM450.R500.PSM-7
BCM450.R500.APPP-OBTP-1
BCM450.R500.SU.System-001.200911

Dependencies:
Required Updates: None

Product Dependencies: None

Size: 69.21 MB

Size of changed content since last Smart Update: 11MB

System Impact:
Time to apply approximately 10 minutes
Does update application force reboot: Yes
Over last Cumulative Smart Update: Yes
Over default content: Yes

Other Impacts: 
All services will be unavailable during the update until the system reboot completes.

Limitations: None

Update Removable: No


Software Update BCM450.R500.DHCP-12 Description:
-----------------------------------------------

- ISC DHCP dhcpclient buffer overflow vulnerability 
A security vulnerability has been reported in ISC DHCP, which can be
exploited by malicious people to cause a DoS (Denial of Service) and 
potentially compromise a user's system. dhcp component is updated to
version 4.1.0p1 to address this issue.
Q02065537-04 


Software Update BCM450.R500.FEPS-11 Description:
-----------------------------------------------

- BCM SIP calls challenged mid call do not authenticate
Some endpoints will challenge for authentication while in the middle
of a call. If this happens when the BCM has sent a BYE indication, the
trunk will not be released.
Q02078147

- H323 Trunk Disconnect Error from CS1K
When the CS1K releases an H.323 trunk, it now sets the Release Complete
Cause value, and this causes the BCM Release Reason logic to think that
the call is being rejected rather than released normally.
Q02086223

- No voice path on BCM SIP when calling from IP set
This was the result of message arriving at the SIP Media control state 
machine when it was not expected, and it was discarded instead of acted on. 
Q02086260


Software Update BCM450.R500.SOFTWARE-MANAGEMENT-10 Description:
---------------------------------------------------------------

- Patch hardware and software release requirements are not validated 
Because the platform type and software release of patches were not
strictly enforced, it was possible to apply patches from the BCM 450 R1 
release onto BCM50 R5 software. This update corrects the issue by 
enforcing the software and hardware requirements.
Q02097684


Software Update BCM450.R500.FEPS-9 Description:
-----------------------------------------------

- No voice path for forwarded calls on SIP trunk
Because of a timing issue in a tandem call scenario, new media paths
are being set up as previous ones are being torn down, and the new
requests were not being remembered when the old path was gone.
Q02085075

- Caller ID information is not sent to the destination SET on calls tandemed through BCM
Call is originated on SIP trunk and tandem through BCM on PRI trunk to the 
destination SET. The main number is sent as a CLID instead of actual CLID of 
the calling party. The originating DN information was mistakenly derived from the 
Contact header on tandem calls. This update resolves the issue
Q02059946-02


Software Update BCM450.R500.PSM-7 Description:
--------------------------------------------

- BCM should alarm if network port is operating in half duplex mode
The LAN1 and LAN2 ports on the faceplate are configured by default with 
auto-negotiation enabled to determine the link speed and duplex mode of 
the far end LAN endpoint. In the event that the far end LAN endpoint does
not have auto-negotiation enabled, the LAN port uses half duplex mode.
Although this behavior is compliant with IEEE 802.3 specifications, full
duplex mode is desired. In addition, a duplex mismatch will cause numerous
Ethernet frame losses or retransmissions. This 'minor' alarm (Alarm ID 
11215) informs the user when a half duplex condition is detected
Q02088053-01

- Factory redundant system fan alarm
The Fan Alarm is being raised and automatically cleared after every reboot.
The HWM FPGA receives a instantaneous reading of the fan speed that is 0 
or very low, but the fan is still spinning normally. 
Added some delay to the alarm to hold off alarming right away and check 
the fan speed for another minute and only raise the fan alarm if the fan is
not turning properly within that minute.
Q02083198


Software Update BCM450.R500.Call-Recording-6 Description:
-----------------------------------------------

- PCR message header incomplete - missing leading 0 for time indications
The email title of a PCR email is changed to carry 0 in time second field 
when dealing with numbers smaller then 10. And also to include the 
Dialed Digits in email title of a PCR when making outbound calls
(when the digits are available).
Q02085072

- Removed the failed record call email message and now support the ability to
record forwarded calls that are not utilizing analog trunks. Enhanced the 
algorithm used to determine the actual number of keycodes in use to avoid
cases where calls can't be recorded due to lack of keycodes. 
Q02084988

- When performing a call recording with the Manual stop recording option
set to "Send recording only when F995 invoked", using F995 will send the
entire recording and not just the recording from the point when F995 
was activated.
Q02090954


Software Update BCM450.R500.APP-Launcher-5 Description:
-----------------------------------------------

- Remove the multiple authentication prompts received when accessing the BCM 
web interface.
This update ensure if the user enter a wrong user ID or password they are prompted
to re-enter their user ID and password. Also, a start menu item is added for any
application installed by the application launcher.
Q02084870

- This solution removes the link to youtube and cache the video for Find Me Follow Me
application on a Nortel server. 
Q02083135


Software Update BCM450.R500.APPP-OBTP-1 Description:
-----------------------------------------------

- APPP Text Paging
The text paging allows the broadcast of a text message to a number 
of configured sets. This feature can be invoked from the CAB (Customer 
Assistance Box) or by invoking F970 on any phone.

The Text Paging feature is enabled via the existing APPP keycodes 
and up to a maximum of 25 destinations can be reached for a single
Customer Assistance Box.

The Text Paging solution on BCM is integrated with existing BCM features 
and does not require additional hardware.
Q02089305


Software Update BCM450.R500.SU.System-001.200911 Description:
-----------------------------------------------

- When FindMe FollowMe is calling a remote destination and there is no CLID information 
available, the destination display should show "FindMe FollowMe" but, it shows ">indMe FollowMe".
This update resolves the issue.
Q02069207

- FindMe FollowMe does not work on some sets due to timing issue in state machine.
Q02069558

- FindMe FollowMe should be disabled for Fax On Demand mailbox.
Q02069559 

- Firmware download for BRIM module does not start and get stuck in 'downloading state' 
for Italy profile.
Q02068927

- Modemcc crashes on shutdown.
Q02069569 

- One-way voice path after an intercom call is blind transferred to PSTN.
Q02072531

- BRI trunks show under 'Active Physical Lines' settings.
Q02071501 

- Set Template provider agent is started before template files have been restored
This causes the agent to be started before Core Telephony is available.
Q02070804

- Set Template uses 100% CPU
Using a Virtual Terminal DN for a new template, causes the system to run at 100% until 
Set Template provider agent is stopped and restarted.
Application DNs are not supported for template assignment and should return an error.
Q02074010

- Router alarms when no router present in the system
This was caused by restoring the 'backup' from a system with a router.
PSM PDR data should not be restored as part of backup/restore operations.
Q02069532

- The External modem CLID and Low priority external modem CLID are swapped
If a new account is added under Configuration->Administrator Access->Accounts and Privileges->View by Accounts
the External modem CLID and Low priority external modem CLID are swapped.
Q02069696

- Release 5.0 version of Factory Default Archive is not available
The Restore function of the BCM has an option where the operator can select 
Factory Default Archive. This special backup archive is kept on the device and 
it is a record of the BCM in an unconfigured state.
Q02070028

- Memory leak in SRC Server
SRC Server blocked on unresponsive client resulting in increase with Memory consumption.
Q02052794

- Invoking F995 or 996 results in no change to set display
When using the manual 'Silent Record a Call' functionality with F995 and F996, the user 
will not receive any indication on the set display when the call is being recorded or when the 
request has been made to stop the recording.
Q02066543

- Outbound e-mails should support SSL and custom SMTP ports.
Q02069979

- Several alarm events 'Not able to record a call 579'
When a call that is being recorded is placed on hold an alarm can be generated indicating 
that the call could not be recorded. This can also occur if using FindMe FollowMe as call states 
are changing very rapidly.
Q02071548 

- The Call Center Reporting Menu Prompts and Sub-menus are played twice 
when no agents are available.
Q02065985

- Fix for H.323 security vulnerability.
Q02069433

- Relayed media paths are not properly disconnected by MPS
For a relayed media path, MPS does not send disconnect path to all endpoints when 
receiving NotifyDisconnect from one endpoint.
Q02072872

- Meetme Chairperson password duration = 0 does not disable reset requirement
Setting the MeetMe Conferencing "Authorization check period" (days) to a value of 0 should disable 
the need to reset the PIN.
Q02073035

- Implementation of desktop shortcuts for Application Launcher.
Q02064530

- With German selected (or any non-english language), the FindMe FollowMe "Always" 
schedule will not work
The check to compare "Always" schedule is done against the English string only. 
If the language associated with a mailbox in not English, then the FindMe FollowMe
"Always" schedule will not work.
Q02071484

- Unsupported options displayed for analog E&M trunks in EM
When an analog E&M trunk is connected by a FEM module to a BCM
the following unsupported options are displayed in Element Manager:
- Loss package
- Line tuning digit 
- Gain
Selection of any of these options can result in impact to 
trunk operation in worst case taking it out of service.
Q02005920-01 

- In Element Manager when accessing Active physical lines and selecting any 
line to view the properties a "General error" message is displayed as a popup. 
The user needs to press "OK" on the popup to see the properties of that line. 
This error message has no functional or operational impact to the BCM or the 
circuit displayed and will be addressed in a future update. 
Q02013774-01

- Caller id information is lost for inbound calls
After the BCM is rebooted the first DID call via the BCM PRI to any
BCM IP set displays both the calling name and number. For all 
subsequent calls only the calling number is displayed. 
Q02039982-03 

- SIP trunking E.164 number formatting for international calls does not work. 
Q02063715

- FEPS crashes when SIP VoIP trunk calls are attempted to a proxy sever 
which is unable to handle the digit string.
Q02071778

- When an outbound SIP trunk call is configured with codecs that are incompatible 
with the called endpoint, the call could connect without any voice path.
Q02071798

- During call startup or upon changes in SIP trunk user configuration, if an outgoing 
call is made at the same time, it can cause an internal deadlock. This would cause 
all the subsequent calls to fail until VOIP Gateway component is restarted.
Q02072004

- Application Launcher warning required
Application Launcher should provide a warning dialog before removing desktop applications.
Q02068335

- Alarm 44000 displays with "messages dropped (queue was full)"
This message should not be displayed as this is a common occurrence 
and it is not service impacting.
Q02072768

- Unified Messaging fax receipts is missing the Original Body of the Message 
A fax with a delivery receipt request sent using the Unified Messaging to an external 
fax number is missing the original message fax body.
Q02071498 

- Unable to start or stop IVR application on BCM via NCM wizard.
Q02073677

- Outgoing FindMe FollowMe SIP trunk call takes 7 seconds to setup the media.
Q02072602

- FindMe FollowMe doesn't work 
F960, F995, F996, F997, F998 and F999 returns "Feature Inactive". 
Doorphone, Professional Call recording do not work.
Q02075067

- The Remove Software Update button should be grayed out
From Element Manager, Navigate to Administration->Software Management->Software Update History.
The Remove Software Update button should be grayed out when an update is selected.
Q02076915 

- EM Help Context does not show dialog when help is not installed
If the context sensitive help is not installed, using Element Manager Help->Help Contents-> 
opens a browser to a page that does not exist on the PC. A dialog box should be 
displayed indicating the help is not installed and should be downloaded with the 
Application Launcher. 
Q02076338

- The Redundant Power Supply fan wires on pin 3 and 4 are swapped
When there is a problem with the module and the failure is presented with the LEDs 
on the modules the message does not align with the LEDs. 
Q02076094 

- The disable and re-enable of RAID causes services to fail to start and presents 
incorrect LEDs status.
Q02076096 

- Redundant Power Supply alarms IDs are incorrect for "fail to read".
Q02077214

- Number of sets that display CLID on initially alerting calls are limited to 30
This was the limitation on the BCM 3.x platform. The new BCM platform can handle 
more than 30 sets displaying CLID.
Q02075907

- Multiple Alarms "Fan1 stopped; investigate fan, replace if required" is being generated
This was related to the HWM-FPGA thermal algorithm which drives the fan speeds.
Q02071537 

- In certain configurations FMFM will fail to dial out if the "*", "#" or "D" are used 
to prefix the destinations.
Q02076209 

- FEPS memory consumption slowly increases over time.
Q02064160

- When applying a keycode file with reduced functionality from the existing keycode file 
the keycode file may fail to apply.
Q02075461

- No media path with incoming SIP calls when IP set is configured with SRC.
Q02076260

- BCM can not send SMTP packet when authenticating using TLS.
Q02077964

- Voicemail fails to start and CTE coredumps after system startup
During startup the DHCP client script dhclient-exit-hooks is being called twice which 
causes services to be restarted in the middle of startup. This leads to unpredictable 
behavior on startup.
Q02073910

- MPS crashes when FEPS crashes in releasing call
When FEPS crashes, MPS detects this activity and tries to unregister all the FEPS
endpoints. MPS crashes itself when trying to clean up a closing path related to one 
of the FEPS endpoints.
Q02080691

- ICC agent status busy after Adhoc conference
The Agent remains in a busy state and no more call are presented to this agent.
Q02080405

- IP Capture to external USB device is not working
Q02079535

- Unable to perform external USB port test in System Test
Q02082134

- Configuration changes are lost if SIP trunk registration is running in the background
When SIP registration is enabled and refresh interval is less then 2 minutes sip 
registration status is written into PDR temp folder frequently. This prevents PDR 
updates to be persistently stored into disk and changes are lost during power cycle.
Q02079180

- When Element Manager is installed through Application Launcher the 
desktop icon is incorrect.
Q02079685

- FMFM fails to get enabled for some sets at startup
Q02082015


This update includes the content of the following superseded Smart Updates:

BCM450.R500.SU.System-002.200912


