NOTE: If the system has been upgraded to BCM Release 5.0, install the 
"Factory Image Upgrade" for Release 5.0 FIRST before installing any Smart Updates.

Software Update Name: BCM450.R500.SU.System-021.201402

Applicable H/W Platforms: BCM450

Applicable S/W Platforms: 9.0.1.00 through 9.0.1.XX

Category: GEN

Installation Recommendations:
This update should be applied to all new installs of BCM450 Release 5.0. 
Existing installations should have this update applied if they are experiencing any 
of the issues that are corrected. There is no need to schedule specific maintenance 
to apply this upgrade if there are no reported issues. In those cases, systems should
be updated at the next regular service opportunity.

The Element Manager must be downloaded and installed after this update is applied if
the version of Element Manger currently being used is not 61.0.0.

After application of this update, the current Element Manager session used to apply the update 
will need to be closed and re-opened in order to download the latest Element Manager cartridge.

Components & Versions:

   analog-profiles 5.1.7.23
   aps 5.1.3.76
   bcmEMcartridge BCM450R5.ac51
   bsp-kernel 5.1.3.120
   cdr 5.1.4.4.1.04.a.752
   cfs 5.0.125
   core-telephony 5.1.2.28.130
   core-telephony-provider 5.1.2.641
   cte 7.5.1.00.A.503
   cteapps-obt 5.1.3.184
   cti 52.1.5.736
   dhcp 4.1.0p1.9
   dhcp-provider 5.0.201
   dialogger 45.1.2.589
   dsp-firmware 5.1.50.20.40.9.71
   element-manager 62.0.5.422
   element-manager-docs 5.0.36
   elsie_timezone_32.tgz elsie_timezone_32.18
   feps 5.1.34.739
   gap 5.1.10.273
   initrd 2.47.444
   iptel-mrs 5.1.30.457
   iptelprovideragent 5.1.2.771
   lan-provider 5.0.315
   license-provider 5.0.527
   lms 5.1.1.619
   log-provider 5.1.3.749
   mailsend 5.0.7
   mgs 5.1.34.775
   modemcc 52.0.522
   mof-db 2.91.530
   mps 5.1.30.775
   mpsmi 5.1.29.718
   nnu 45.0.400
   nnu-pdrd 45.2.610
   openssh 5.3p1.9
   pal 5.0.212
   psm 5.1.1.208
   qos-monitor 5.1.1.473
   recovery 5.1.1.708
   recovery-config 5.0.236
   remotex 5.0.89
   samba 3.0.5.14
   scd 5.1.10.677
   set-template-provider 5.0.210
   snmp-provider 5.1.2.755
   software-management 5.1.6.667
   software-management-provider 5.1.2.705
   src 5.1.13.137
   system-provider 5.0.530
   system-release 9.0.1.74.682
   uboot 5.1.1.700
   upgrade_fixes 5.0.2.1
   utps 5.1.43.771
   voicemail 50.1.28.752
   webpage 5.1.3.499

New updates for this SU:
-------------------------
BCM450.R500.CORE-TELEPHONY-143*
BCM450.R500.UTPS-140*

* It has not been released as an 'atomic' patch


Updates from previous SU:
-------------------------
BCM450.R500.ELEMENT-MANAGER-137
BCM450.R500.VOICEMAIL-136
BCM450.R500.BEM-133
BCM450.R500.CDR-132
BCM450.R500.IPTEL-131
BCM450.R500.CORE-TELEPHONY-130
BCM450.R500.UTPS-128
BCM450.R500.UTPS-125
BCM450.R500.SRC-124
BCM450.R500.SAMBA-122
BCM450.R500.VOICEMAIL-123
BCM450.R500.SNMP-PROVIDER-120
BCM450.R500.CORE-TELEPHONY-119
BCM450.R500.KERNEL-117
BCM450.R500.SRC-114
BCM450.R500.INITRD-113
BCM450.R500.UTPS-111
BCM450.R500.BCM-to-IPO-Migration-110
BCM450.R500.KERNEL-106
BCM450.R500.SRC-94
BCM450.R500.CORE-TELEPHONY-107
BCM450.R500.VOICEMAIL-108
BCM450.R500.CORE-TELEPHONY-105
BCM450.R500.KERNEL-97
BCM450.R500.TIMEZONE-104
BCM450.R500.UTPS-102
BCM450.R500.GAP-101
BCM450.R500.DSP-FIRMWARE-99
BCM450.R500.CORE-TELEPHONY-98
BCM450.R500.CTI-96
BCM450.R500.VOICEMAIL-93
BCM450.R500.CORE-TELEPHONY-92
BCM450.R500.RECOVERY-91
BCM450.R500.UTPS-87
BCM450.R500.DSP-FIRMWARE-84
BCM450.R500.BEM-82
BCM450.R500.ELEMENT-MANAGER-81
BCM450.R500.CORE-TELEPHONY-80
BCM450.R500.UPGRADEPATCH-79
BCM450.R500.VOICEMAIL-75
BCM450.R500.SOFTWARE-MANAGEMENT-PROVIDER-76
BCM450.R500.IPTEL-73
BCM450.R500.CORE-TELEPHONY-72
BCM450.R500.DSP-FIRMWARE-71
BCM450.R500.CTE-69
BCM450.R500.CTE-60
BCM450.R500.GAP-74
BCM450.R500.CORE-TELEPHONY-68
BCM450.R500.CDR-39
BCM450.R500.CORE-TELEPHONY-53
BCM450.R500.UTPS-54
BCM450.R500.VOICEMAIL-61
BCM450.R500.IPTEL-62
BCM450.R500.CORE-TELEPHONY-57
BCM450.R500.VOICEMAIL-51
BCM450.R500.DSP-FIRMWARE-48
BCM450.R500.VOICEMAIL-41
BCM450.R500.DSP-FIRMWARE-40
BCM450.R500.SCD-36
BCM450.R500.QOS-MONITOR-35
BCM450.R500.SOFTWARE-MANAGEMENT-33
BCM450.R500.VOICEMAIL-29
BCM450.R500.ANALOG-PROFILES-27
BCM450.R500.UBOOT-21
BCM450.R500.CORE-TELEPHONY-50
BCM450.R500.MPS-49
BCM450.R500.CORE-TELEPHONY-44
BCM450.R500.CTI-42
BCM450.R500.IPTEL-34
BCM450.R500.MBN-37
BCM450.R500.CTE-32
BCM450.R500.APSServer-13
BCM450.R500.SOFTWARE-MANAGEMENT-18
BCM450.R500.COMBO-14
BCM450.R500.ANALOG-PROFILES-3
BCM450.R500.IPTEL-19-2
BCM450.R500.SSH-26-1
BCM450.R500.DHCP-12
BCM450.R500.FEPS-11
BCM450.R500.Call-Recording-6
BCM450.R500.APP-Launcher-5
BCM450.R500.SOFTWARE-MANAGEMENT-10
BCM450.R500.FEPS-9
BCM450.R500.PSM-7
BCM450.R500.APPP-OBTP-1
BCM450.R500.SU.System-001.200911

Dependencies:
   Required Updates: 
   - BCM450.R500.CALLPILOTDESKTOPMESSAGING-100 or later

   Updates should be applied in the following order:
   - BCM450.R500.CALLPILOTDESKTOPMESSAGING-100 or later
   - BCM450.R500.SU.System-021.201402


Product Dependencies: None

Size: 100.54 MB

Size of changed content since last Smart Update: 0.02 MB

System Impact:
Time to apply approximately 10 minutes
Does update application force reboot: Yes
Over last Cumulative Smart Update: Yes
Over default content: Yes

Other Impacts: 
All services will be unavailable during the update until the system reboot completes.

Limitations: 

The following 2 limitations are specific to BCM <-> SCS interoperability.

- Codec renegotiation during xfer to auto attendant on SCS.
In this scenario, a call from PSTN gets tandemed to a set on SCS. The SCS
user attempts to transfer to another SCS set, but it supports a different
codec from what the first set on SCS supports. The transfer failed, because
there is no overlap in the offered Codecs and the Codec supported by the target.
The workaround is for all the SCS sets to support the same Codec.
Q02036115

- CLID shows as anonymous during a double blind transfer.
Anonymous shows up when testing the following scenario: 
- Set1 on SCS calls PSTN through BCM 
- Set1 blind xfers the call to set2 on SCS. On Set2, name is
shown as transfer and DN of transferor is shown. 
- Set2 then blind xfers the call to set3 on scs. On set3 we
only see anonymous. 
Q02036122


Update Removable: No


New updates for this SU:
------------------------

Software Update BCM450.R500.CORE-TELEPHONY-143 description
-----------------------------------------------------------
1.BCM digital user is not able to hear the announcement from CISCO service 
  provider, when the PSTN subscriber is not available. 
  This update resolves this issue.
  wi01133324

2.IP 1210 with headset causes intermittent phone lockup. Users cannot transfer, cannot get dialtone.
  This update resolves the issue.
  wi01141886

Software Update BCM450.R500.UTPS-140 description
-------------------------------------------------
1.Inclusion of UNIStim 5.5.1 0621C8T,0623C8T,0624C8T and 0625C8T for IP phones 
  i2007, 1110, 1120e and 1140e respectively.062AC8T for IP phones 1210, 1220 and 1230.
  wi01124863


Previous updates description:
------------------------------

Software Update BCM450.R500.ELEMENT-MANAGER-137 description
-----------------------------------------------------------
1.IP Trunks in BCM 5.0 Element Manager shows Non-supported CODEC (G723).
  User can choose G723 as a supported codec for IP trunks though it is not
  supported.
  This update resolves the issue by removing the G723 option from the IP Trunks.
  wi01061069

2.Non-supported CODEC (G723) showing as available in BCM 5.0 Element Manager.
  User can choose G723 from a drop down list of supported codec for IP sets
  though it is not supported.
  This update resolves the issue by removing the G723 option from the list.
  wi01061066

Software Update BCM450.R500.VOICEMAIL-136 description
------------------------------------------------------
1. IP sets lose connection with BCM.
   An user logs into a MeetMe conference by entering access code and presses 
   '#', and if he eventually waits then all IP sets will go down. This update 
   corrects the issue.
   wi01061352

2. Unable to connect and retrieve data from BCM - RCC Bad XML issue.
   The RCC gets stuck whenever it gets the NULL priority Info for Skillset 
   call. This update corrects the problem by resolving the NULL priority info 
   issue.
   wi01062190

Software Update BCM450.R500.BEM-133 description
-----------------------------------------------
1. 64 bit support for CallPilot Desktop Messaging
   This update makes two separate links available for CallPilot Desktop
   Messaging download on the web page- one for 32-bit OS and the other for 64-bit OS.
   wi01090500

Software Update BCM450.R500.CDR-132 description
-----------------------------------------------
1. CDR Live Data sent by the BCM has some elements missing.
This issue happens for long calls where there is huge call data. The part of
Cdr server which is responsible for sending the data to live clients, is not
able to cope up with huge call data. This update resolves the issue.
wi01080862

Software Update BCM450.R500.IPTEL-131 description
-------------------------------------------------

1. Call coming from PSTN is answered by a set in Normal mode and then the call
gets transfered to another normal mode set. There is a one way way speech path
found. This update resolves the issue.
wi00728987

2. Outgoing call to mobile phone does not have speech patch when connecting
to the mobile mailbox for some of the subscribers. This update resolves the
issue.
wi01060763

3. BCM50 calls to B5800 that blind transfers to
CS1K Unistim phone. The call is dropped on CS1K Unistim when CS1K Unistim
phone answers the call. This update resolves the issue.
wi01061359

4. No voice path between CS1K SIPline phone and BCMx50R5 phone when using
Call sender feature on Call Pilot. This update resolves the issue.
wi01062572

5. CS1K calls BCM, upon answering the call BCM does consultative transfer to
SM.
Once SM  retrieves the call after hold, BCM starts auto dialing to SM
continuously.This update resolves the issue.
wi01062180

6. Local call on BCM50R6 when blind transferred to B5800 over SIP results in
one way speech path. This update resolves this issue.
wi01062920

7. There is no voice path on SIP call originating from BCM to B5800
which is forwarded to CS1K because BCM is not able to send a re-INVITE
with proper IP address in SDP.This update resolves this issue.
wi01061534

8. Speech path issues faced during , transferring the call and while
redirecting the call back to Centralised mail on CS1K.
This update resolves this issue.
wi01061815

Software Update BCM450.R500.CORE-TELEPHONY-130 description
----------------------------------------------------------

1.Feature icons may not be retained in KEM/set keys.
  Feature icons will not retain in KEM keys or set keys, when any key is
  programed or reprogramed. This update resolves the issue.
  wi01062950

2.No OLI from BCM50 to BCM450 Trunks.
  BCM 50 R6 connected to BCM450 R6 using either H323 or Sip trunks in direct
  mode does not send OLI from BCM 50 out over the PRI lines connected to the
  BCM450 R6
  wi01062942

3.AA answers in half the ring cycles configured for Sweden market profile.
  In Sweden market profile,the Autoattendant is configured to answer incoming
  calls after 12 rings. However,the call gets answered by the AA after 6
rings.
  This update resolves the issue.
  wi01062939

4.Call forward to Broadcast Hunt Group does not work.
  When an analog incoming call on a set gets forwarded to broadcast
  HG where all the members of the HG also have the appearance of the incoming
  analog trunk, then call is not presented to the HG members.
  This update resolves the issue.
  wi01062878

Software Update BCM450.R500.UTPS-128 description
------------------------------------------------
1.Inclusion of UNIStim 5.5 0621C8Q,0623C8Q,0624C8Q and 0625C8Q
  for IP phones i2007, 1110, 1120e and 1140e respectively.
  062AC8Q for IP phones 1210, 1220 and 1230.

  UNIStim Software Release 5.5 provides minor feature enhancements
  and numerous quality improvements have been delivered with this
  UNIStim 5.5 software release.
  wi01066908

Software Update BCM450.R500.UTPS-125 description
------------------------------------------------
1.Inclusion of UNIStim 5.4 0621C8L,0623C8L,0624C8L and 0625C8L
  for IP phones i2007, 1110, 1120e and 1140e respectively.
  062AC8L for IP phones 1210, 1220 and 1230.

  UNIStim Software Release 5.4 provides minor feature enhancements
  and numerous quality improvements have been delivered with this
  UNIStim 5.4 software release.
  wi01055208

Software Update BCM450.R500.SRC-124 description
----------------------------------------------
1.SR: 1-3824348881: PCR feature generating "Failed to record a call" alarms regularly
  Professional call recording feature fail to record calls which are forwarded
  from application DNs and raised the "Failed to record a call" alarms.
  wi01042611

2.SR 1-3617118047 PCR feature trying to record calls answered by Application Dns
  Professional call recording feature tries to record calls which are answered
  by application DNs.
  wi01007452

Software Update BCM450.R500.SAMBA-122 description
-------------------------------------------------
1.System Backup on Network shared folder on Win Vista and higher
  release fails.
  System backup fails as the smb.conf file was not updated. This
  patch updates the smb.conf file and facilitates backup on network
  shared folders of Win Vista or higher release.
  wi01047962

Software Update BCM450.R500.VOICEMAIL-123 Description:
-------------------------------------------------
1. Voice Mail Message Forwarding feature activation issue
   After applying the Kernel patch BCM450.R500.KERNEL-117,
   Desktop Messaging (DM) Keycodes are not activated. Because of 
   which Message forwarding feature is not getting enabled in
   CallPilotManager. This update corrects the issue.
   wi01049224

2. Message Forwarding .From. Email address field is not applied to emails
   sent.
   When using Message forwarding, voice messages are not getting forwarded when 
   "From" E-mail address is configured in CallPilotManager with BT SMTP server.
   This update will correct the issue.
   wi01049219

Software Update BCM450.R500.SNMP-PROVIDER-120 Description:
-------------------------------------------------
1. SNMP service not running after reboot of BCM 
   SNMP service will not be running after the BCM reboot.
   This update will start the service if SNMP is enabled,
   once the BCM is rebooted.
   wi01036120

Software Update BCM450.R500.CORE-TELEPHONY-119 Description:
-------------------------------------------------
1.SIP Trunks get locked up
  When incoming SIP call contains the digits that match the destination/called systems
  destination codes and there is no Remote Access Package allowing the tandem call, the 
  SIP trunks get locked up. This update resolves the issue.
  wi01025217

Software Update BCM450.R500.KERNEL-117 Description:
-------------------------------------------------
1. System rebooted on its own
   System resets on its own and reboot reason is "Hardware Watchdog".
   This patch has following diagnostic changes and fixes:
   >PMEM (persistent memory) is enabled.
   >Checks Decrementer against 0 in idled task and fixing it.
   >Checks if interrupt is enabled and fixing if not. 
   >Checks if Hard IRQ is enabled and fixing if not.
   >Checks if Soft IRQ is enabled and fixing if not.
   >Ensures watchdog kick every 10ms at most.
   >Ensures 10us delay between the completion of the SPI transaction and the
   de-assertion of the chip select.
   wi00969702, wi00969962, wi00974563, wi00976719, wi00976752, wi00982709,
   wi01011169, wi01017802

Software Update BCM450.R500.SRC-114 Description:
-------------------------------------------------
1. PCR In the recorded audio file the first 90 seconds or so is missing
   The root cause was that SRC (PCR) was blocked in a CTE function call and was 
   delayed to handle the other call recording. The fix was to unblock SRC from 
   CTE function and made it available to handle the other recordings.
   WI00935893

2. BCM stops sending PCR emails
   The root cause was that the call recordings were not made due to SRC (PCR) blocked 
   on CTE function calls and therefore no emails were sent. The fix was unblock SRC 
   from CTE function calls.
   WI00959359  


Software Update BCM450.R500.INITRD-113 Description:
-----------------------------------------------------
1. RAID Disk mirroring fails to complete successfully if the HDD has been imaged 
   using Acronis True Image 2011 (or later) software. 
   This patch resolves conflict with the disk consistency and disk size checks.
   Wi00966160


Software Update BCM450.R500.UTPS-111 Description:
---------------------------------------------------
1. Inclusion of UNIStim 5.3 0621C8J,0623C8J,0624C8J and 0625C8J
   for IP phones i2007, 1110, 1120e and 1140e respectively. Also,
   062AC8J for 1210, 1220 and 1230 sets.

   UNIStim Software Release 5.3 provides minor feature enhancements.
   Five customer reported cases have been closed and numerous quality 
   improvements have been delivered with this UNIStim 5.3 software release.
   Visit http://support.avaya.com/css/P8/documents/100152833;CSSSESSIONID=
   D2GMTgvRQ2QJjrfkNG5YTnJ4kSxqKJvL9RnN8hRY32SYhGJws8Vr!170487718 for the
   detailed bulletin.
   wi00970246


Software Update BCM450.R500.BCM-to-IPO-Migration-110 Description:
--------------------------------------------------------------------
1. Migrate the existing 1120, 1140, 1220 and 1230 series UNIStim sets 
   to SIP based sets.Sets should also redirect themselves to the IPO 
   when BCM/SRG is replaced with an IPO without manual intervention.

   When the TFTP server is ready user can navigate to a specific area of
   EM(Configuration->Resources->IpSets->Migrate Sets to IPO )and provide
   the IPO IP address. This TFTP address is persistent and can retain its
   value across BCM/SRG reboot and EM restart.

   DHCP server should be turned OFF in case IP sets are in DHCP ON mode 
   and user wants to use a different DHCP server (other then BCM or Third
   party DHCP server) just before actual migration starts.

   User should press the "Migrate Now" button to start actual migration
   process and all supported sets will reboot.Upon reboot UNIStim sets
   will be able to send Read Request to the IPO (provisioned IP address)
   and download the configuration files. Sets are capable of reading 
   configuration files and download SIP firmware and redirect themselves to an 
   IP as per device configuration.
   wi00970249


Software Update BCM450.R500.KERNEL-106 Description:
----------------------------------------------------
1. System rebooted on its own.
   System resets on its own and reboot reason is "Hardware Watchdog".
   This fix has the timer interrupt loop change for booke micro to avoid
   possible deadlock. This Fix also increases the upper boundary check for a
   decrementer which will ensure that the task is completed within the
   stiputated time.
   wi00950466, wi00950503, wi00909437


Software Update BCM450.R500.VOICEMAIL-108 Description:
-------------------------------------------------------
1. Incorrect numbers were showing in RCC reports.
   The problem was that the logout information for some agents was not getting
   updated correctly after which any calls to the skillset were being reported 
   as unstaffed.This update resolves this issue by introducing an additional 
   check at the time of logout and updates tables accordingly.
   wi00900452  

2. French Language prompt change
   French textprompt 'recu' in Mailbox Manager had not been translated correctly. 
   This update resolves this by rectifying the French word.
   wi00908487


Software Update BCM450.R500.CORE-TELEPHONY-107 Description:
------------------------------------------------------------
1. Intercom key locked and unable to make or receive calls
   Set displays "No free buttons" while going off hook or trying to seize 
   the line after a TAT scenario. No calls can be made or received from 
   the problematic set. This update corrects the issue.
   wi00958750

2. Auto Attendant plays incorrect greeting.
   Incoming calls on T1 E&M auto answer trunks hear the generic greeting
   "enter the mailbox number or press # for company directory" when answered
   by the auto attendant.This update corrects the issue.
   wi00962042 


Software Update BCM450.R500.SRC-94 Description:
------------------------------------------------
1. Unnecessary alarms are causing issues with reporting tools
   Certain events are triggering alarms that contain irrelevant debug information. 
   This information is causing issues with reporting tools used to monitor 
   alarms. This update prevents those alarms from being displayed. 
   wi00874947

2. Emailed recordings are incomplete
   Professional call recording is configured to forward recordings via email. The 
   recordings are not complete. This update should ensure the complete and 
   correct recording is captured.
   wi00850243 
   Known Issue: A new issue (which is "no attachment" on some of the emails) is observed in the 
             designer load with the fix wi00850243, and the WI wi00908744 has been raised for that,
             which is being worked.


3. Stop Professional call recording via F996
   The fix provides a manual method to stop a call recording by pressing Feature 996
   when the call recording is in progress.
   wi00864355



Software Update BCM450.R500.CORE-TELEPHONY-105 Description:
-----------------------------------------------------------
 - Crosstalk on IP sets when outgoing calls are made over PRI trunk.
   Crosstalk is heard on the IP set when an autodial key, configured with 
   the destination code is pressed to make an outgoing call on the PRI
   trunk. This update corrects the issue.
   wi00868013


Software Update BCM450.R500.KERNEL-97 Description:
--------------------------------------------------
 - System rebooted on its own.
   System reboot on its own and reboot reason being "Hardware Watchdog".
   This issue is seen because of power save feature enabled in CPU.
   This update fixes the issue by disabling the power save feature in CPU.
   wi00864211


Software Update BCM450.R500.TIMEZONE-104 Description:
------------------------------------------------------
 - DST Cancellation for Russia
   On February 8, 2011, cancellation of DST in Russia was made official. 
   An hour was added in March 2011 for the last time, and clocks will not 
   move back again in the fall. This fix updates OS package to accommodate
   this day light saving cancellation.
   wi00942733  


Software Update BCM450.R500.UTPS-102 Description:
-------------------------------------------------
 - UNIStim5.2 wrapping for Mx50 R5
   Unistim 5.2 supports the Sets with New LCDs which will be released as part 
   of the Cost Reduction Program. UNIStim Software Release 5.2 delivers quality
   improvements for all IP Deskphones including software fixes for over sixty 
   work items, and resolution of seven customer reported cases.
   It fix following isssue,
   During speakerphone conference calls using 2007 IP Desk phone, the 2007 may
   beep and mute itself after some period of time.

   Inclusion of UNIStim 5.2 0621C8G,0623C8G,0624C8G and 0625C8G
   for IP phones i2007, 1110, 1120e and 1140e respectively. 
   062AC8G for IP phones 1210, 1220 and 1230.
   wi00937489

 - Too long RUDP re-transmission (30 ms)
   Too long RUDP re-transmission worsens the muting problem at beginning 
   of call with lost RUDP packet.
   This update corrects a condition where RUDP re-transmission 
   time (1.5s) is too long.
  
   The issue is resolved by changing the timeoutLength value.
   wi00867328


Software Update BCM450.R500.GAP-101 Description:
-------------------------------------------------
 - Security settings corrupted when "Password History" enabled in EM.
   Login with user as nnadmin , default password and there will be no issues
   on immediate backup of the BCM. After changing the password on the BCM
   there are issues with performing immediate backups or taking logs from
   the BCM. This update will correct the issue.
   wi00904444


Software Update BCM450.R500.DSP-FIRMWARE-99 Description:
--------------------------------------------------------
 - T38 Fax fails when CNG tone is received after T38 switching
   Inbound T.38 fax calls are failing to the Avaya BCM450 when going through
   the CS2KCombo gateway using VSP3. This update ignores the CNG tone received
   by BCM from the far-end after T38 switching has happened, allowing the call
   to be answered correctly.
   wi00881513


Software Update BCM450.R500.CORE-TELEPHONY-98 Description:
----------------------------------------------------------
 - After applying SU2-2 analogue line lock ups
   Calls which get answered by Auto Attendant through analog lines get locked 
   if the calling party disconnects the call without pressing any option of 
   the Auto Attendant. This update corrects the issue.  
   wi00856047

 - IP sets cease playing of Background Music 
   Intermittently, IP sets cease  playing the background music, even though
   the packet captures show music streaming to the phone on the correct ports.
   wi00856009


Software Update BCM450.R500.CTI-96 Description:
-----------------------------------------------
 - RCC reports contained inaccurate data.
   Due to Network callback feature, when the transferred callcenter call is 
   given back to agent, it is considered as a new call. But the original call
   details where not cleared from agent leading to the discrepancy in the RCC
   reports. This update corrects the issue by clearing the call details from
   agent.
   Wi00729124
   
 - Transfer to voicemail stops working.
   Transfer to voicemail (feature 986) stops working on some sets. When the
   F986 is invoked and the mailbox number is entered, the call is not 
   transferred to voicemail and it stays on hold. This was happening due to a
   mismatch in the set table of CTI. This update corrects the issue by fixing
   the set table.
   Wi00578136


Software Update BCM450.R500.VOICEMAIL-93 Description:
------------------------------------------------------
 - Mailbox Manager OAM prompts: Text that needs to be corrected from English 
   to French.
   Some of the textprompts were in English even when French language was
   selected. This update resolves this issue by translating all the prompts
   to French.
   wi00865648 

 - Unable to use F989 or Voicemail
   When F989 is used to record a call, the temporary copy of the recording
   does not get deleted. This blocks a lot of BCM disk space and in the long
   run, there was no space left for new calls/messages to be recorded. This 
   update deletes the temporary copy of the recording from the BCM thereby 
   resolving the hard disk space issue.
   wi00856050


Software Update BCM450.R500.CORE-TELEPHONY-92 Description:
----------------------------------------------------------
 - One way speechpath on meet me conference.
   Intermittently a one way speech path may occur when setting up  a 3 party conference CALL.
   If a conference member mutes himself and then disconnects from the conference, speech resources 
   are not properly cleaned up. If members of a  subsequent 3 party conference use this improperly 
   released resource they may experience one way speechpath.
   wi00875958

 - Tandem Calls from PRI -> BCM450 A - > SIP -> BCM 450 B - > SET get no CLID
   CLID intermittently displays on destination telephone after tandem from PRI
   to SIP.  Using the "INFO" button or Feature 811 only toggles Calling Name 
   and Line.  CLID does not display.
   wi00892879

 - Intermittently one-way speech with Meet-Me conference.
   When a meet-me conference mutes himself and then goes into hold, 
   now all the participants in the conference drop the call, the held participant will be 
   released by the conference Server. The conference resource used by him remains in MUTE state. 
   So for the next conference in the system whichever participant is allocated with this MUTED.
   This update corrects this issue.
   wi00839791

 - One way speech with Meet-Me conference
   When a meet-me conference user enters into the conference and gets unheld after being held.
   The user gets muted. This update corrects the issue.
   wi00903480


Software Update BCM450.R500.RECOVERY-91 Description:
----------------------------------------------------
 - The Sftp transfer fails for big sized backup files. 
   The scheduled SFTP backup transfers the partial backup file to server if backup size is 
   large (>100MB). This is because of premature death of ttyw window.
   This update resolves this issue by running the "SCP" command on the background thus not 
   allowing the "ttyw" component not to be killed.
   wi00885449


Software Update BCM450.R500.UTPS-87 Description:
------------------------------------------------
 - SR 1-1418760772: When calling 12xx series IP sets the called parties speech is muted 
   for ~1.5s. 
   The first few seconds of conversation is muted for calls to IP sets.
   When calling 12xx series IP sets, the called party speech is muted for the first 
   0.5-1.5 seconds due to delayed acknowledgement from 12xx set to BCM for setting of
   speech path.

   Inclusion of UNIStim 5.1 solves this issue.
   0621C8D,0623C8D,0624C8D and 0625C8D for IP phones i2007, 1110, 1120e 
   and 1140e respectively. 062AC8D for IP phones 1210, 1220 and 1230.
   wi00881909


Software Update BCM450.R500.DSP-FIRMWARE-84 Description:
---------------------------------------------------------
 - BCM 5.0: Echo on IP calls during double talk
   This update makes adjustments to the DSP echo canceller parameters 
   for detection of double talk (2 people speaking at once) and regular echo
   (single talk) to minimize echo on calls to the public network.
   wi00854612


Software Update BCM450.R500.BEM-82 Description:
------------------------------------------------
 -  CallPilot: Outlook 2010 support should be mentioned on the HTML download page.
   CallPilot Desktop Messaging -  Microsoft Outlook 2010 is supported from version
   05.00.41.112. This information has been updated in the CallPilot DM download page for BCM.
   wi00868722


Software Update BCM450.R500.ELEMENT-MANAGER-81 Description:
------------------------------------------------------------
 - System speed dial are sometimes deleted when clicking on the next line in Element Manager
   There is a race condition between the Edit Event and Select Event. When
   editing a row, if the next row is selected too quickly, the edited entry will be deleted.
   This update will resolve this issue.
   wi00854633

 - EM v.62.0.0 does not allow Shift 9 [(] and Shift 8 [*] to be used as a characters 
   in system passwords. The fix is to now use Shift 9 & 8 key presses as 
   shortcuts for opening and closing the Network Element view respectively.
   wi00873718
   
 - NCM operation "Import BCM Configuration" failes while retrieving Set Templates.
   This happens if any of the Set Template node has one of its Set button programmed
   with HuntGroup or AnswerDN or Lines.
   wi00868385


Software Update BCM450.R500.CORE-TELEPHONY-80 Description:
----------------------------------------------------------
 - Coretel crash due to invalid TN (logevent 115)
   This update corrects the referencing of NULL message pointer which results in a 
   crash of the core telephony component.
   wi00854606

 - Unable to leave VM when Telephony Audio Collection Service activated.
   When the Telephony Audio Collection Service (TACS) feature is invoked on a
   set and we try to invoke any Voice mail  on the same set, the voice mails
   sent to the called set do not get delivered. 
   wi00860199

 - Cannot program KIM autodials and features using "drop-down" keys through Element Manager
   Unable to  program KIM auto-dials and features "drop-down" keys through Element
   Manager once  a second KIM is added to a T7316E
   wi00854261

 - VoIP trunking stops working and requires reconfiguration.
   Due to a Nill pointer reference the coretel component was crashing.
   This caused VoIP trunks to fail and after coretel came back up the VoIP trunks had 
   to be reconfigured. 
   wi00848997


Software Update BCM450.R500.UPGRADEPATCH-79 Description:
--------------------------------------------------------
 - There have been a few reports from the field detailing some SIP settings being lost (defaulted)
   after upgrading from 50R5 to 50R6. This patch will prevent the SIP settings from being
   lost (defaulted) during the upgrade. This patch must be applied prior to upgrading to R6.
   wi00865516


Software Update BCM450.R500.VOICEMAIL-75 Description:
-----------------------------------------------------
 - CC Calls are not presented to active agents
   A call center call which has been answered by CDN more than 50 times, 
   Shall not be answered any further. This results in the call 
   being left unanswered/unassigned even when agents became available. 
   This update corrects the problem by removing the hard limit
   of 50 as the number of times the CDN would answer any call.
   wi00829597

 - Mailboxes are getting stuck "in use".
   When accessing mailboxes (F981), users may receive the response of "in use"
   and will not be able to access the mailbox.  This problem has been seen 
   after upgrading from BCM400 Rls. 4.0 to BCM450 Rls. 5.0.
   This update resolves this issue.   
   Wi00847070

 - (RCC) 2.45.101, 103, & 104 download stops with CannotConnecttoDB
   For Caller Input rule configuration, step number greater than 20 was causing 
   RCC download to stop. The maximum permissible value of step number is 20 and a 
   value greater than that should not be allowed.
   This update checks the step number value and if it is greater than 20, it is 
   defaulted to 1.
   wi00729149

 - RCC is not able to download call data from the BCM due to Invalid XML data.
   The RCC download of new call data will stall when invalid DNIS (Dialed Number Identifier Service) 
   information is received. When encountered, this update will change the invalid DNIS
   information to "0" allowing RCC to download the call data.
   wi00728838   

 - RCC is not able to download call data from the BCM due to Invalid XML data.
   The RCC download of new call data will stall when invalid DN (Directory Number) 
   information is received. When encountered, this update will change the 
   invalid DN information to "0" allowing RCC to download the call data.   
   wi00578145 

 - Not Ready activities are missing from XML
   A CC call when presented to one agent but answered by another agent using 
   Pickup Group would intermittently cause invalid state transitions for the 
   first agent. This would cause the call id to remain active with the first agent 
   giving rise to discrepancies in RCC agent reports. The fix includes clearing the 
   call id from the first agent if any invalid state transition occurs.
   wi00578144

 - Messages Forwarding Not being marked on Delivery
   Message forwarding has been configured to delete messages from the users mailbox when delivered 
   to the specified email recipient.The message are being delivered, and we can see 
   the delivery receipt being returned to the BCM, but the BCM is not deleting the 
   original message.In this case the problem is with delivery status.
   While parsing the last msg mime file it doesnot match with the delivery status and the message will
   not marked on delivery.This update now handles the DSN properly to make sure it's not NULL.
   wi00733428  

 - Messages Forwarding Original Msg Not being deleted on Read
   Message forwarding has been configured to delete/read messages from the users mailbox when opened by the recipient.
   The message are being delivered, and we can see the read receipt being returned to the BCM,
   but the BCM does not delete/read the original message.The problem is with disposition notification status.
   While parsing the last msg mime file it does not match with the disposition notification status and
   the message will not marked/deleted on opened.This update now handles the DSN properly to make sure it's not NULL.
   wi00845278  

 - RCC is not able to download call data from the BCM due to Invalid XML data.
   The RCC download of new call data will stall when invalid Physical Line values
   i.e physical line value > 999 is received. This issue is resolved by introducing a check
   for valid range of physical line allowing RCC to download the call data.   
   wi00856054


Software Update BCM450.R500.SOFTWARE-MANAGEMENT-PROVIDER-76 Description:
------------------------------------------------------------------------
 - Unable to use special characters ($ * ` " ' / ? and Space) in passwords to a FTP server 
   for software updates of BCM via EM
   wi00729051


Software Update BCM450.R500.IPTEL-73 Description:
-------------------------------------------------

 - Outgoing T.38 fax calls over H.323 dropped by BCM
   BCM closes the logical channel because the far end RTCP port is set to 0 
   for T.38 codec. BCM interprets it as invalid transport address.
   wi00827742

 - Tandemed SIP calls to PSTN fail if it does not answer within 10 seconds 
   VoIP Gateway was ignoring the PROCEED message from Core and dropping the
   call if did not receive any other message within 10 seconds.
   wi00729003

 - Incoming fax call fails when BCM is configured to use G.711 for fax.
   BCM ignores SDP offer with G.711 media description in re-INVITE after 
   rejecting the initial T.38 offer because a flag was not reset properly.
   wi00834836


Software Update BCM450.R500.CORE-TELEPHONY-72 Description:
----------------------------------------------------------
 - Analog Set will ring continuously (FNA) or provide dead air (FB)
   SRG Analog Set will ring continuously (when set to Forward No Answer) 
   or provide dead air (when set to Forward Busy).
   wi00831988

 - Tandemed SIP calls to PSTN fail if it does not answer within 10 seconds
   VoIP Gateway was ignoring the PROCEED message from Core and dropping the
   call if did not receive any other message within 10 seconds.
   wi00729168



Software Update BCM450.R500.DSP-FIRMWARE-71 Description:
--------------------------------------------------------
 - Fax receives and sends duplicate pages using SIP to SRG50 or CS1K
   Fax receives and sends duplicate pages due to the missing EOLs at the end of
   page from BCM side. This issue is resolved in this fix.
   Q02104860-01
   wi00840478


Software Update BCM450.R500.CTE-69 Description:
-----------------------------------------------
 - CTE client intermitently can't connect to BCM
   Attempts by Vesta client to connect with the BCM fails due to a
   CoreTel timeout. This timeout occurs because the LAN CTE device table
   has been improperly populated with a secondary station index. 
   wi00729046


Software Update BCM450.R500.CTE-60 Description:
-----------------------------------------------
 - BCM Monitor does not display E&M lines in use, if the line number 
   is higher than 150. E&M trunks are working fine but do not  display 
   when in use in BCM Monitor. 
   This update corrects the issue by checking the Line Number against 
   the lowest possible Target Line Number - 1.
   Q02157110

 - BCM Monitor shows incorrect status of IP Trunks.
   When an external outgoing call is made, from a set, and released quickly
   before the far-end responds, then the trunk status under BCM Monitor is
   shown incorrectly as active. This update resolves the issues as the necessary
   code changes are made in CTE which updates the trunk status correctly.


Software Update BCM450.R500.GAP-74 Description:
-----------------------------------------------
 - Enhancements to authentication procedures
   This update includes improvements and enhancements to certain 
   authentication procedures.
   wi00855088


Software Update BCM450.R500.CORE-TELEPHONY-68 Description:
----------------------------------------------------------
 - Target lines are locked up.
   Target lines assigned to a phone for incoming calls are locking up. A
   After customer speaks with caller and hangs up, the target line is 
   getting locked up. 
   wi00729083

 - 8x16 has 4 ports stuck in enabling
   After upgrade to BCM 6.0 the upper four ports of an 8 port 
   analog trunk card will not enable. This affects GATM 8,
   8x16, and ADID8 modules.
   wi00839353

-  MWI, tone OR lamp, for analog phones on ATA2 not working
   Sets connected to ATA hardware are rejecting MWI lamp / tone update requests.
   Q02079632-01, wi00578097 


Software Update BCM450.R500.UTPS-54 Description:
------------------------------------------------
 - A Bluetooth headset can lose connectivity with its paired IP set.
   The only way to make it work is to unpair the device, turn off 
   Bluetooth on the phone and exit. Then go back in and turn on 
   Bluetooth and repeat the pairing sequence.

   Inclusion of new UNIStim4.2 firmware solves this issue.
   0623C7M,0624C7M and 0625C7M for IP phones 1110, 1120e and 1140e respectively.
   062AC7M for Ip phones 1210, 1220 and 1230.
   Q02088099-02 

Software Update BCM450.R500.CORE-TELEPHONY-53 Description:
----------------------------------------------------------
 - Cannot select facility for External Autodial in EM
   When programming an autodial using Element Manager one
   is not prompted to enter what facility should be used
   (Routing Table, Prime Line, Line Pool). 
   Q02151428

 - Rotary Hunt Group not functioning correctly
   When an incoming call is blind transferred to a roatry hunt group, 
   The first available set in the HG only gets a short ring blip, but
   on completion of the transfer, the call rolls to the next avialable set.
   Q02146813

 - Call forward to Exchange UM fails with TRO on incoming call
   An incoming call to the SRG is forwarded to the users set in Normal
   mode on the main office. If TRO is active and the set actually has
   Call Forward All Calls setup on the main office to the Exchange UM
   server, the forwarded call will be disconnected.
   Q02091162-02

 - Remote sites don't not get Ringback tone
   No ringback tone is audible to caller for outgoing tandem calls from
   BCM to PSTN on T1 E&M trunks to a BCM4.0 although call is
   actually ringing at the far end.
   This update resolves the issue.
   Q02118568-03

 - No CLID transmission on transferred calls to CS1k over H.323 trunks
   When an incoming call to BCM transfers the active call
   to a CS1K set over h323 with f70 feature, the incoming
   line identifiers (CLID Information) are not transferred to customer.
   Q02046221-02


Software Update BCM450.R500.CDR-39 Description:
-----------------------------------------------

 - Fallback Call is not Recorded in CDR.
   The call details for the fallback call is not getting recorded in the CDR 
   records.
   This update records call details for the fallback call.
   Q02117054


Software Update BCM450.R500.VOICEMAIL-61 Description:
----------------------------------------------------

-  BCM all versions - # or * input rules stops RCC (Microsoft SQL based) download
   Customer was using # and * as single character, fixed length caller input
   rule for CC calls. These two characters are to be used as wildcard characters.
   This update has blocked the usage of # and * as caller input rules because
   these are wildcard characters and the BCM reserves a different meaning for
   them. Introduced a change in the GUI textprompt appropriately.
   Q02126983-03


Software Update BCM450.R500.IPTEL-62 Description
--------------------------------------------------

-  No speech path on calls forwarded over SIP to voicemail because BCM ignores SDP 
   offer in re-INVITE.
   Q02146327, Q02170290, Q02168330, Q02125377-01

-  Codec renegotiation across SIP trunk fails when far end sends re-INVITE because 
   incorrect data type conversion causes comparision of SDP version number to fail.
   Q02129617

-  No voice path on H323 slow start call with some endpoints
   A variable indicating FPP (frames per packet) is not initialized for some
   endpoint types in slow start calls, and can cause no voice path if not
   compensated for by the other switch.
   Q02087019-03

- Caller ID information is lost on PRI to SIP tandem calls
   If NI2 PRI signaling is used, the Caller ID may arrive shortly after the call
   setup from the PRI, and will not be properly propagated to a CS1K using MCDN.
   Q02093671-03

- BCM drops call if first contact in 300 Multiple Choices response is TCP 
   transport, it does not read the rest of the Contact headers.
   Q02083699

6. If T.38 fax is disabled over SIP while a T.38 fax transmission from BCM
   is attempted, the BCM rejects the destination's attempt to switch to T.38
   in a manner that is incompatible with some service providers.  This can
   cause the call  to be left active, in an unpredictable state with no
   voice path.  With this fix, the call will be torn down.
   BCMRELEASE-1092

7. Directed Call Pickup not allowed for BCM SIP call
   Attempts to pick up BCM calls by SCS over SIP trunk were blocked by
   BCM not allowing REFER in unanswered state.
   Q02100613-02


Software Update BCM450.R500.CORE-TELEPHONY-57 Description
-----------------------------------------------------------

-  KEMs reboot when moving lines using Feature *81
   When attempting to move lines from the main phone to the KEMs 
   or between KEMs using Feature *81 on three KEMS added, after
   the third or fourth move all KEM modules on the phone will
   start rebooting themselves and any lines previously moved in the
   same feature *81 session move back to their original location.
   Q02156071

-  No ring back on tandem calls.
   Incioming calls to a target line which tandem out of the BCM are 
   disconnected after 2 rings if not answered, and the calling party
   does not hear ringback tone.
   Q02160900

-  Direct pickup fails on SCS when call is originated from BCM
   Attempts to pick up BCM calls by SCS over SIP trunk were blocked by
   BCM not allowing REFER in unanswered state.
   See the note under 'Limitations'.
   Q02102264-02

-  BCM <-> SCS interop: issue with Direct pickup on
   SCS when call is external to BCM 450r1
   An incoming PSTN call tandems via BCM over a SIP trunk to SCS
   where it rings at set A. If, while set A is ringing, SCS set B
   attempts direct call pickup, the call pickup will succeed but
   there will be no media path connection.
   Q02130340-02

-  CLID does not appear on analogue set
   Due to some anomaly, when calling an Analogue set on a GASI port
   no CLID of calling number appears for an internal or external calls. 
   Q02063636-03


Software Update BCM450.R500.VOICEMAIL-51 Description:
-----------------------------------------------------

 - VoiceMail Read Receipts Enhancement to include Original Body of the Message
   A VoiceMail Read Receipts Enhancement has to be made for the read receipt to 
   include the original message bodies with the receipt. This gives the user 
   the ability to request a read receipt from a person listening to a message 
   and actually return the original message back to the sender to tell them 
   which message they listened to.
   The voice or fax original message bodies are included in the read receipts 
   and can be listened to or viewed by F981 or Unified Messaging. This 
   enhancement does not apply to AMIS certified messages.
   Q02032711-02


Software Update BCM450.R500.DSP-FIRMWARE-48 Description:
--------------------------------------------------------

 - BCM Faxes stop working after 3 Days
   Fax messages are failing due to a DSP lockup. This fix resolves the issue
   Q02111119 


Software Update BCM450.R500.VOICEMAIL-41 Description:
-----------------------------------------------------

 - Full backup causes incorrect agent logon status
   If a full backup is taken while call centre agents are logged on the log 
   status of those agents will be incorrect after the backup has completed.
   Q02051933-03

 - Bad XML causing RCC download to stop
   A CC call is routed to an agent set which has CFNA (Call Forward No Answer)
   or another agent set configured as its AnswerDn. This generates an invalid
   reason id and as the result RCC gets stuck. This update generates a valid
   reason id and facilitates such call scenario.
   Q02057991-03

 - RCC Stopped collecting data due to Bad XML from BCM
   The RCC gets stuck whenever it reads an invalid CLID from the database (DB).
   This update will populate "0" as CLID when encounters invalid CLID, enabling
   RCC to work smoothly.
   Q02115768-01


Software Update BCM450.R500.DSP-FIRMWARE-40 Description:
--------------------------------------------------------

 - Echo Canceller Improvements 
   This change addresses a problem in which media gateway channels used 
   by IP trunks or IP sets experience echo or muting of the speech path 
   in one direction during periods in which speech is present in both
   directions (double talk). The change provides a balance for the amount of 
   muting during double talk while improving echo suppression during single 
   talk.
   The update also resolves the problem of clipping when a high volume signal 
   is received from the far end.
   Q02082691-02 

Software Update BCM450.R500.SCD-36 Description:
-----------------------------------------------

 - SSLV2 Security update for BCM5.0
   Changes to the internal security audit will block SSL v2 entirely and ensure
   that only SSL v3/TLS v1 with a minimum of 128 bit level of encryption cipher 
   is used. This update will make changes to ssl.conf and block future SSL v2
   requests.
   Q02106222-03



Software Update BCM450.R500.QOS-MONITOR-35 Description:
-------------------------------------------------------

 - VoIP virtual trunk calls fail to connect
   Process qmond crashes due to a boundary exception in an array. 
   This condition results in FEPS service failing to initialize properly 
   therefore, no VoIP trunk calls can complete call setup.
   Q02114541


Software Update BCM450.R500.SOFTWARE-MANAGEMENT-33 Description:
---------------------------------------------------------------

 - Factory image patch cannot be applied
   After applying the December SU, when attempting to apply the factory
   image patch, the factory image patch does not display through the 
   Element Manager. The December SU contained a fix that prevents patches
   of the wrong release and platform from being applied. Due to the time 
   when the factory image was created, it contains different metadata that
   causes the fix to incorrectly identify the release version the patch is 
   intended for.
   Q02111314

 - Patch requested reboots delayed by 3 minutes 
   Patches that require a reboot do not reboot right away but wait for 
   3 minutes before initiating the reboot. A flag that was set to 
   allow for the Element Manager to display the patch complete 
   dialogue boxes was not being cleared correctly.
   Q02102927


Software Update BCM450.R500.VOICEMAIL-29 Description:
-----------------------------------------------------
 - Dial by name not working correctly
   Once Auto attendant answers an incoming call, the caller dials an extension
   DN or a DN name that requires pressing the digit "8" twice, the call goes to
   voicemail since "88" is a voicemail access feature. This update resolves the
   issue.
   Q02056548-03

 - Silent monitoring feature crashes CallPilot and makes CPU usage 98%
   The CPU spikes up and Callpilot becomes unresponsive if the agent being
   monitored by supervisor terminates the call before the supervisor ends
   the monitoring feature. This occurs when Silent Monitor is used in
   the Danish or Swedish Text prompts. This update resolves the issue.
   Q02056626-03

 - FTP recorded info not being recorded by CCRSTEST
   FTP destination info for silent recording not being displayed by CCRSTEST
   page as the path for the sftp consists of ''. This update resolves the
   issue.
   Q02072737-01 


Software Update BCM450.R500.ANALOG-PROFILES-27 Description:
-----------------------------------------------------------

 - Add regional profile for Switzerland (analog stations) to the 
   Telephony Regions EM screen.
   Q02103473

 - Add regional profile for UAE (disconnect supervision on analog trunks), 
   which also supports E1 Digital trunks, to the Telephony Regions EM screen.
   Q02103474

 - Add regional profile for Venezuela (disconnect supervision on analog trunks) 
   to the Telephony Regions EM screen.
   Q02118435-01


Software Update BCM450.R500.UBOOT-21 Description:
-------------------------------------------------

 - BCM450 Release 5.0 uboot not flashed to the boot flash 
   It is possible in certain circumstances for a customer to receive a FRU BFT 
   that does not have the updated Release 5.0 version of uboot installed. In 
   that case RAID will not work without the upgraded uboot. 
   This update forces an update to the boot flash.
   Q02064535


Software Update BCM450.R500.CORE-TELEPHONY-50 Description:
----------------------------------------------------------

 - BCM 5.0 Issue see with core telephony when leaving a conference call - ref lost. 
   - If while recording a conference call, one of the conference participants 
     places the call on hold, on call release,  the speech connection may 
     not be properly released resulting in dangling resources.
   - A set makes an outgoing call to 2 external parties, conferences them 
     together and records the conference. If one of the external parties drops '
     out of the conference, speech connection will be lost shortly after 
     with the remaining conference member.
   Q02139464

 - Nnsupport option for remote modem enable failed.
   If a remote modem  session between the BCM  and IP destination
   is severed, attempts to reestablish the connection will occasionally
   fail since the BCM thinks the previous session is still active.
   Q02150262

 - Cannot answer incoming calls to IPsets with KEMS using LAN CTE
   Under high traffic conditions, when IP sets with KEMs installed, 
   receive incoming calls they cannot be unable to answeed using
   LANCTE although all indictors are the TAPI is OK.
   Q02149267  

 - Intermittent call drops when incoming calls are answered 
   Intermittently, incoming calls on analog lines are disconnected when
   answered.
   Q02091670-01


Software Update BCM450.R500.MPS-49 Description:
-----------------------------------------------

 - Unable to remotely log in using nnsupport account
   During certain times of the day, it is not possible to remotely
   log in to perform maintenance operations using the nnsupport
   account.
   Q02150262

Software Update BCM450.R500.CORE-TELEPHONY-44 Description:
----------------------------------------------------------

 - Conference call is dropped
   An incoming and outgoing trunk are conferenced together
   through the BCM. When the set disconnects, the call
   is dropped instead of being transferred.
   Q02115424-03
   Q02144072

 - TRUNKS BECOME UNANSWERABLE 
   Incoming calls on analog trunks can get locked up while in
   the ringing state.
   Q02144424

 - No speech path on SIP trunk to SIP trunk FMFM call 
   An incoming SIP call is directed to a destination set where 
   Find Me Follow Me is enabled. The call tandems to 2 
   FMFM destinations. When the call is asnswered there
   is no speech path. This update resolves the issue.
   Q02136227

 - Multiple Business Name version error in upgrade code.
   The MBN upgrade code does not update the version
   ID correctly for the MBN data structure. 
   This can result in lost or defaulted data.
   Q02140413

 - DND icons disappearing from KEMs attached to 1230 sets
   KEM icons may incorrectly display a monitored set as idle
   when it is in fact in Do Not Disturb mode.
   Q02076812-03


Software Update BCM450.R500.CTI-42 Description:
-----------------------------------------------

 - 'Voice Mail Busy - Try again' displays on sets when F981 is invoked
   Voicemail process F981 by invoking MakeCall() API/function. When there is no
   line assigned in the accessed Line pool, MakeCall() fails with 'device not
   responding' and this failed response is not being passed to voicemail.
   This update corrects the problem by sending failed response to voicemail.
   Q02072337-01


Software Update BCM450.R500.IPTEL-34 Description:
-------------------------------------------------

 - BCM SIP No Voice Path after blind transfer to Call Pilot
   A timing window exposed a state in which an event was not handled
   resulting in no speech path in certain transfer scenarios.
   Q01975905-01

 - BCM SIP Fallback to PSTN too slow on WAN failure
   When the WAN connection is down, every attempted SIP call takes ten
   seconds to fail over. 
   Q02112810

 - BCM SIP call dropped on slow start transfer
   Some SIP servers negotiate media between endpoints by sending slow start
   INVITEs with no SDP. The BCM was not responding with a media offer
   sometimes, resulting in the call being dropped.
   Q02124559

 - i2004 cannot add 4th KEM
   The i2004 phone will not come up after adding the 4th KEM unit.
   Q02067394-03

 - SRG set F/W downloads every time it switches between normal and local.
   Because the SRG and the normal host may have different F/W for the IP
   sets, a download is forced each time the set registers to the new switch
   as the WAN goes up or down.
   Q02112423-0

 - Inclusion of UNIStim 3.4 firmware release for IP sets 
   i2001/i2002/i2004 phase 2
   Inclusion of UNIStim 4.1 firmware release for IP sets
   1110/1120E/1140E/1210/1220/1230/2007
   Q02124398-02

Software Update BCM450.R500.MBN-37 Description:
-----------------------------------------------

 - Core telephony crash 
   This problem could occur when an IP trunk with multiple
   associated media paths released a call. If an IP trunk has
   2 or more media paths assigned when it released there is 
   a possibility for the  Coretel software to enter an
   infinite loop and lock up. 

   An IP trunk could end up with 2 or more media paths
   either by :

   - multiple sets alerting for a call on the trunk, or, 
   - additional media paths assigned via a spurious
     media path connect request which creating an extra
     media path when a set blind transfers a call to an
     IP trunk. (released while hearing the ringback.) 

   In either case, if the IP trunk has multiple media
   paths assigned then when the IP trunk call is released
   resyulting in  an infinite loop (software lockup).

   This update 

   - prevents Core Telephony from sending a request to
     connect a media path when not required (preventing
     unexpected multiple media paths assigned to IP trunks), and
   - repairs a s/w error that could result in an infinite
     loop when an IP trunk with multiple media paths releases.
Q02133182

 - Intermittent Caller ID Failure
   Intermittently Caller ID information is not presented
   on the destination set for incoming calls over analog lines.
Q02074343-03


 - CoreTel reset during multi-part conference disconnect.
   When a multi party conference call was being released
   the core telephony component crashed due to a NULL
   poiner reference.
Q02117999


 - Can not cancel Hot Desking after transferring a call
   Set A, B, C and D: register to the BCM
   1. From set B, use feature *999 to hot desking set A
   2. From set C, press Intercom line and dial DN of set A.
   3. Receive the call on set B and transfer the call to set D.
   4. Set D receive the call and two way speech path is
      established between C and D. Set B released from the call
      by pressing Join soft key.
   5. If one tries to Cancel hot desking from set A, it will be denied
      with a message announcing set B is on an active call.
Q01899589-01

 - Incoming DID redirected over MCDN SIP to CS1K CP AA is disconnected
   An incoming DID call which tandems through a BCM to a CS1K where
   it is answered by the CS1K Auto Attendant is disconnected with
   a release reason of "interworking unspecified."
Q02091716-03

 - TAPI agent cannot join held call
   An incoming held call cannot be retrieved using TAPI E911
   applications. 
Q02111952-02

 - Updated Network Name display allows per set / hunt group
   business name + sending of longer name
   The update provides Multiple Business Name facilities on a single 
   BCM such that a single system can represent multiple "sub-tenants" 
   from a Network Name Display perspective.

   - A Bcm now has up to 5 unique Business Names.
     o During an upgrade the previous single Business Name will
       be copied to Business Name 1.

   - Each Set and Hunt group in the BCM can be associated with
     1 of the 5 business names, or no Business Name (None).
     o By default, each Set & HG is associated with Business Name 1.

   - When Network Name Display (NND) is to be generated for a
     related Set/HG's call, the associated Business Name 
     (1 - 5, None) will be used.

   - Each Set and HG now has a "Long Name" field (up to 15 
     characters).  
     o This field is used for NND only.
     o During an upgrade the current Set/HG name will be copied
       to the Long Name field.
     o There is an associated check-box "Use Long Name?".
       The default value is No (unchecked).
     o If Use Long Name is Yes, then this Long Name will be
       used in place of the Set or HG name when NND is to be
       generated for a call.

    - All NND truncation rules remain the same.   
      o A generated NND can not exceed 15 characters total.
      o Set or HG [long] name being used in the NND will be
        truncated sufficiently such that the NND is no more
        than 15 characters.
      o There is no automatic insertion of a space ' ' between
        the Business Name and Set/HG [long] name in the generated
        NND.
    Q02100149

 - CLID not displayed on Cfwd across SIP to BCM 5.0
   When a Call is Call forwarded to another BCM 5.0 via SIP
   trunks CLID does not get passed to the receiving set.
   Q02105118

 - Unable to re-direct a line to an international phone 
   number via Element manager
   Unable to re-direct a line to an international phone number
   via element manager. One can successfully redirect the call 
   for the same line and number using F84 from a telephone set.
   Q02112366

 - SIP calls not disconnecting properly
   In some SIP call scenarios, it was found that as part of 
   disconnecting a call, BCM will send a re-invite to put a
   call on hold and then BCM sends a BYE. This can 
   cause an  IP trunk to lock up.  
   Q02109019

 - IP phone display changes from French to English
   An IP set is configured to display in French. The user changes the name of an
   extension on the system using Feat**CONFIG. The display turns to English and
   Feat*502 no longer works to revert it back to French.
   Q02038936-01




Software Update BCM450.R500.CTE-32 Description:
-----------------------------------------------

 - Fallback Call does not Appear in BCM Monitor.
   The line on which a fallback call is routed does not appear in the 
   BCM Monitor. This update corrects the issue.
Q02117062 


Software Update BCM450.R500.APSServer-13 Description:
-----------------------------------------------------

 - Intermittent false alarm and wrong status information in 
   Auto Administration Manager (AAM) panel on the 'Tools' option of 
   the Business Element Manager when applying updates.
   This update resolves the issue.
Q02083846



Software Update BCM450.R500.SOFTWARE-MANAGEMENT-18 Description:
---------------------------------------------------------------

1. Factory image patch cannot be applied
After applying the December SU, when attempting to apply the factory
image patch, the factory image patch does not display through the 
Element Manager. The December SU contained a fix that prevents patches
of the wrong release and platform from being applied. Due to the time 
when the factory image was created, it contains different metadata that
causes the fix to incorrectly identify the release the patch is intended for.
Q02111314

2. Patch requested reboots delayed by 3 minutes 
Patches that require a reboot do not reboot right away but wait for 
3 minutes before initiating the reboot. A flag that was set to 
allow for the Element Manager to display the patch complete 
dialogue boxes was not being cleared correctly.
Q02102927



Software Update BCM450.R500.COMBO-14 Description:
-------------------------------------------------

 Taiwan E1 feature
This update introduces E1 trunk functionality to the new TaiwanE1 market profile.
Q02037297-01

 Russia Busy Tone Disconnect Supervision for GASI and GASM
Russia Busy Tone Disconnect Supervision feature support for GASI and 
GASM is added in this update. This is a regulatory requirement in Russia 
and some other members of the CIS (Former Soviet Union) that there should 
be an indication from the station interface when the far end disconnects.
Q02036546-01

 Second Dial Tone for Digital Trunks
This update provides a 2nd dial tone which is different from normal dial
tone for Digital Trunks in Germany and Taiwan Profile.
Q02065876

 F900 for observed agent will show the observing supervisor
If an observed agent makes an outgoing call, does a F900
then enters an account code, the DN of the supervisor secretly
observing the agent is then shown.
Q02060854-02

 LAN CTE application becomes unresponsive
The Admin server is allocating a different Secondary Station Index
whenever the KEM is booting for reasons other than the IP set
registration. The code which is responsible for requesting the
Secondary Station Index is being executed whenever the KEM boots
up (e.g. hot plug in, IP set going offline and online, etc.) 
without checking whether it is already allocated or not.
Q02059094-02

 System reboots intermittently
This update corrects a coretel crash due to a Nil pointer
reference. 
Q02097260-01



Software Update BCM450.R500.ANALOG-PROFILES-3 Description:
----------------------------------------------------------

- Add regional profile for Germany (analog stations) to the 
Telephony Regions EM screen.
Q02032227-01

- Add regional profile for UAE (disconnect supervision on analog trunks) to the 
Telephony Regions EM screen.
Q02034298-01

- Add regional profile for Ireland (analog stations) to the 
Telephony Regions EM screen.
Q01992558-02


Software Update BCM450.R500.IPTEL-19-2 Description:
---------------------------------------------------

- Media Paths remain locked up by MRS after Media Path Server (MPS) crash
The Media Relay Server (MRS) did not account for one path endpoint 
being missing during its cleanup, resulting in stuck media paths, and 
the inability to make calls on the affected IP trunks.
Q02112425

- BCM SIP calls cannot be originated
Because of a new timing window, an event that is required in order to
initiate a SIP call is arrived before it is anticipated, not when it is 
expected, resulting in an endless wait for it. This change checks to see 
whether it has already occurred rather than just waiting for it.
Q02115808

- No speech path on H.323 tandem calls
As a side-effect from fixing Q02089380 above, it was discovered that
over-generalized error checking for fax calls was causing some valid
requests for voice media paths to be rejected.
Q02103695-02

- BCM SIP treats E.164 International numbers as Unknown numbering
plan if no phone-context is specified.
Q02088870-01

- Proxy failover is not working over SIP trunk when DNS routing is used 
and the WAN connection is down.
Q02039966-03



Software Update BCM450.R500.SSH-26-1 Description:
-------------------------------------------------

- Openssh package upgrade
Current version of OpenSSH used on BCM is prone to a X11 Cookie Local 
Authentication bypass vulnerability. Openssh versions prior to v4.7 are
affected. This update upgrades the Openssh package to the latest 
version (v5.3p1). 
Q02106619-04


Software Update BCM450.R500.DHCP-12 Description:
-----------------------------------------------

- ISC DHCP dhcpclient buffer overflow vulnerability 
A security vulnerability has been reported in ISC DHCP, which can be
exploited by malicious people to cause a DoS (Denial of Service) and 
potentially compromise a user's system. dhcp component is updated to
version 4.1.0p1 to address this issue.
Q02065537-04 


Software Update BCM450.R500.FEPS-11 Description:
-----------------------------------------------

- BCM SIP calls challenged mid call do not authenticate
Some endpoints will challenge for authentication while in the middle
of a call. If this happens when the BCM has sent a BYE indication, the
trunk will not be released.
Q02078147

- H323 Trunk Disconnect Error from CS1K
When the CS1K releases an H.323 trunk, it now sets the Release Complete
Cause value, and this causes the BCM Release Reason logic to think that
the call is being rejected rather than released normally.
Q02086223

- No voice path on BCM SIP when calling from IP set
This was the result of message arriving at the SIP Media control state 
machine when it was not expected, and it was discarded instead of acted on. 
Q02086260


Software Update BCM450.R500.SOFTWARE-MANAGEMENT-10 Description:
---------------------------------------------------------------

- Patch hardware and software release requirements are not validated 
Because the platform type and software release of patches were not
strictly enforced, it was possible to apply patches from the BCM 450 R1 
release onto BCM50 R5 software. This update corrects the issue by 
enforcing the software and hardware requirements.
Q02097684


Software Update BCM450.R500.FEPS-9 Description:
-----------------------------------------------

- No voice path for forwarded calls on SIP trunk
Because of a timing issue in a tandem call scenario, new media paths
are being set up as previous ones are being torn down, and the new
requests were not being remembered when the old path was gone.
Q02085075

- Caller ID information is not sent to the destination SET on calls tandemed through BCM
Call is originated on SIP trunk and tandem through BCM on PRI trunk to the 
destination SET. The main number is sent as a CLID instead of actual CLID of 
the calling party. The originating DN information was mistakenly derived from the 
Contact header on tandem calls. This update resolves the issue
Q02059946-02


Software Update BCM450.R500.PSM-7 Description:
--------------------------------------------

- BCM should alarm if network port is operating in half duplex mode
The LAN1 and LAN2 ports on the faceplate are configured by default with 
auto-negotiation enabled to determine the link speed and duplex mode of 
the far end LAN endpoint. In the event that the far end LAN endpoint does
not have auto-negotiation enabled, the LAN port uses half duplex mode.
Although this behavior is compliant with IEEE 802.3 specifications, full
duplex mode is desired. In addition, a duplex mismatch will cause numerous
Ethernet frame losses or retransmissions. This 'minor' alarm (Alarm ID 
11215) informs the user when a half duplex condition is detected
Q02088053-01

- Factory redundant system fan alarm
The Fan Alarm is being raised and automatically cleared after every reboot.
The HWM FPGA receives a instantaneous reading of the fan speed that is 0 
or very low, but the fan is still spinning normally. 
Added some delay to the alarm to hold off alarming right away and check 
the fan speed for another minute and only raise the fan alarm if the fan is
not turning properly within that minute.
Q02083198


Software Update BCM450.R500.Call-Recording-6 Description:
-----------------------------------------------

- PCR message header incomplete - missing leading 0 for time indications
The email title of a PCR email is changed to carry 0 in time second field 
when dealing with numbers smaller then 10. And also to include the 
Dialed Digits in email title of a PCR when making outbound calls
(when the digits are available).
Q02085072

- Removed the failed record call email message and now support the ability to
record forwarded calls that are not utilizing analog trunks. Enhanced the 
algorithm used to determine the actual number of keycodes in use to avoid
cases where calls can't be recorded due to lack of keycodes. 
Q02084988

- When performing a call recording with the Manual stop recording option
set to "Send recording only when F995 invoked", using F995 will send the
entire recording and not just the recording from the point when F995 
was activated.
Q02090954


Software Update BCM450.R500.APP-Launcher-5 Description:
-----------------------------------------------

- Remove the multiple authentication prompts received when accessing the BCM 
web interface.
This update ensure if the user enter a wrong user ID or password they are prompted
to re-enter their user ID and password. Also, a start menu item is added for any
application installed by the application launcher.
Q02084870

- This solution removes the link to youtube and cache the video for Find Me Follow Me
application on a Nortel server. 
Q02083135


Software Update BCM450.R500.APPP-OBTP-1 Description:
-----------------------------------------------

- APPP Text Paging
The text paging allows the broadcast of a text message to a number 
of configured sets. This feature can be invoked from the CAB (Customer 
Assistance Box) or by invoking F970 on any phone.

The Text Paging feature is enabled via the existing APPP keycodes 
and up to a maximum of 25 destinations can be reached for a single
Customer Assistance Box.

The Text Paging solution on BCM is integrated with existing BCM features 
and does not require additional hardware.
Q02089305


Software Update BCM450.R500.SU.System-001.200911 Description:
-----------------------------------------------

- When FindMe FollowMe is calling a remote destination and there is no CLID information 
available, the destination display should show "FindMe FollowMe" but, it shows ">indMe FollowMe".
This update resolves the issue.
Q02069207

- FindMe FollowMe does not work on some sets due to timing issue in state machine.
Q02069558

- FindMe FollowMe should be disabled for Fax On Demand mailbox.
Q02069559 

- Firmware download for BRIM module does not start and get stuck in 'downloading state' 
for Italy profile.
Q02068927

- Modemcc crashes on shutdown.
Q02069569 

- One-way voice path after an intercom call is blind transferred to PSTN.
Q02072531

- BRI trunks show under 'Active Physical Lines' settings.
Q02071501 

- Set Template provider agent is started before template files have been restored
This causes the agent to be started before Core Telephony is available.
Q02070804

- Set Template uses 100% CPU
Using a Virtual Terminal DN for a new template, causes the system to run at 100% until 
Set Template provider agent is stopped and restarted.
Application DNs are not supported for template assignment and should return an error.
Q02074010

- Router alarms when no router present in the system
This was caused by restoring the 'backup' from a system with a router.
PSM PDR data should not be restored as part of backup/restore operations.
Q02069532

- The External modem CLID and Low priority external modem CLID are swapped
If a new account is added under Configuration->Administrator Access->Accounts and Privileges->View by Accounts
the External modem CLID and Low priority external modem CLID are swapped.
Q02069696

- Release 5.0 version of Factory Default Archive is not available
The Restore function of the BCM has an option where the operator can select 
Factory Default Archive. This special backup archive is kept on the device and 
it is a record of the BCM in an unconfigured state.
Q02070028

- Memory leak in SRC Server
SRC Server blocked on unresponsive client resulting in increase with Memory consumption.
Q02052794

- Invoking F995 or 996 results in no change to set display
When using the manual 'Silent Record a Call' functionality with F995 and F996, the user 
will not receive any indication on the set display when the call is being recorded or when the 
request has been made to stop the recording.
Q02066543

- Outbound e-mails should support SSL and custom SMTP ports.
Q02069979

- Several alarm events 'Not able to record a call 579'
When a call that is being recorded is placed on hold an alarm can be generated indicating 
that the call could not be recorded. This can also occur if using FindMe FollowMe as call states 
are changing very rapidly.
Q02071548 

- The Call Center Reporting Menu Prompts and Sub-menus are played twice 
when no agents are available.
Q02065985

- Fix for H.323 security vulnerability.
Q02069433

- Relayed media paths are not properly disconnected by MPS
For a relayed media path, MPS does not send disconnect path to all endpoints when 
receiving NotifyDisconnect from one endpoint.
Q02072872

- Meetme Chairperson password duration = 0 does not disable reset requirement
Setting the MeetMe Conferencing "Authorization check period" (days) to a value of 0 should disable 
the need to reset the PIN.
Q02073035

- Implementation of desktop shortcuts for Application Launcher.
Q02064530

- With German selected (or any non-english language), the FindMe FollowMe "Always" 
schedule will not work
The check to compare "Always" schedule is done against the English string only. 
If the language associated with a mailbox in not English, then the FindMe FollowMe
"Always" schedule will not work.
Q02071484

- Unsupported options displayed for analog E&M trunks in EM
When an analog E&M trunk is connected by a FEM module to a BCM
the following unsupported options are displayed in Element Manager:
- Loss package
- Line tuning digit 
- Gain
Selection of any of these options can result in impact to 
trunk operation in worst case taking it out of service.
Q02005920-01 

- In Element Manager when accessing Active physical lines and selecting any 
line to view the properties a "General error" message is displayed as a popup. 
The user needs to press "OK" on the popup to see the properties of that line. 
This error message has no functional or operational impact to the BCM or the 
circuit displayed and will be addressed in a future update. 
Q02013774-01

- Caller id information is lost for inbound calls
After the BCM is rebooted the first DID call via the BCM PRI to any
BCM IP set displays both the calling name and number. For all 
subsequent calls only the calling number is displayed. 
Q02039982-03 

- SIP trunking E.164 number formatting for international calls does not work. 
Q02063715

- FEPS crashes when SIP VoIP trunk calls are attempted to a proxy sever 
which is unable to handle the digit string.
Q02071778

- When an outbound SIP trunk call is configured with codecs that are incompatible 
with the called endpoint, the call could connect without any voice path.
Q02071798

- During call startup or upon changes in SIP trunk user configuration, if an outgoing 
call is made at the same time, it can cause an internal deadlock. This would cause 
all the subsequent calls to fail until VOIP Gateway component is restarted.
Q02072004

- Application Launcher warning required
Application Launcher should provide a warning dialog before removing desktop applications.
Q02068335

- Alarm 44000 displays with "messages dropped (queue was full)"
This message should not be displayed as this is a common occurrence 
and it is not service impacting.
Q02072768

- Unified Messaging fax receipts is missing the Original Body of the Message 
A fax with a delivery receipt request sent using the Unified Messaging to an external 
fax number is missing the original message fax body.
Q02071498 

- Unable to start or stop IVR application on BCM via NCM wizard.
Q02073677

- Outgoing FindMe FollowMe SIP trunk call takes 7 seconds to setup the media.
Q02072602

- FindMe FollowMe doesn't work 
F960, F995, F996, F997, F998 and F999 returns "Feature Inactive". 
Doorphone, Professional Call recording do not work.
Q02075067

- The Remove Software Update button should be grayed out
From Element Manager, Navigate to Administration->Software Management->Software Update History.
The Remove Software Update button should be grayed out when an update is selected.
Q02076915 

- EM Help Context does not show dialog when help is not installed
If the context sensitive help is not installed, using Element Manager Help->Help Contents-> 
opens a browser to a page that does not exist on the PC. A dialog box should be 
displayed indicating the help is not installed and should be downloaded with the 
Application Launcher. 
Q02076338

- The Redundant Power Supply fan wires on pin 3 and 4 are swapped
When there is a problem with the module and the failure is presented with the LEDs 
on the modules the message does not align with the LEDs. 
Q02076094 

- The disable and re-enable of RAID causes services to fail to start and presents 
incorrect LEDs status.
Q02076096 

- Redundant Power Supply alarms IDs are incorrect for "fail to read".
Q02077214

- Number of sets that display CLID on initially alerting calls are limited to 30
This was the limitation on the BCM 3.x platform. The new BCM platform can handle 
more than 30 sets displaying CLID.
Q02075907

- Multiple Alarms "Fan1 stopped; investigate fan, replace if required" is being generated
This was related to the HWM-FPGA thermal algorithm which drives the fan speeds.
Q02071537 

- In certain configurations FMFM will fail to dial out if the "*", "#" or "D" are used 
to prefix the destinations.
Q02076209 

- FEPS memory consumption slowly increases over time.
Q02064160

- When applying a keycode file with reduced functionality from the existing keycode file 
the keycode file may fail to apply.
Q02075461

- No media path with incoming SIP calls when IP set is configured with SRC.
Q02076260

- BCM can not send SMTP packet when authenticating using TLS.
Q02077964

- Voicemail fails to start and CTE coredumps after system startup
During startup the DHCP client script dhclient-exit-hooks is being called twice which 
causes services to be restarted in the middle of startup. This leads to unpredictable 
behavior on startup.
Q02073910

- MPS crashes when FEPS crashes in releasing call
When FEPS crashes, MPS detects this activity and tries to unregister all the FEPS
endpoints. MPS crashes itself when trying to clean up a closing path related to one 
of the FEPS endpoints.
Q02080691

- ICC agent status busy after Adhoc conference
The Agent remains in a busy state and no more call are presented to this agent.
Q02080405

- IP Capture to external USB device is not working
Q02079535

- Unable to perform external USB port test in System Test
Q02082134

- Configuration changes are lost if SIP trunk registration is running in the background
When SIP registration is enabled and refresh interval is less then 2 minutes sip 
registration status is written into PDR temp folder frequently. This prevents PDR 
updates to be persistently stored into disk and changes are lost during power cycle.
Q02079180

- When Element Manager is installed through Application Launcher the 
desktop icon is incorrect.
Q02079685

- FMFM fails to get enabled for some sets at startup
Q02082015


This update includes the content of the following superseded Smart Updates:

BCM450.R500.SU.System-020.201310

