Software Update Name: BCM450.R600.CORE-TELEPHONY-51

Applicable H/W Platforms: BCM450

Applicable S/W Platforms: 10.0

Category: GEN

Installation Recommendations:

This update should be applied to all new installations of BCM450 Release 6.0.
Existing installations should have this update applied if they are
experiencing any of the issues that are corrected. There is no need to
schedule specific maintenance to apply this upgrade if there are no
reported issues. In those cases, systems should be updated at the next
regular service opportunity.

Components and Versions:
 
   core-telephony 6.1.1.16.36

Dependencies: 
    - BCM450.R600.SU.System-007.201108 or later

Product Dependencies: None

Updates should be applied int he following order:
    - BCM450.R600.SU.System-007.201108 or later
    - BCM450.R600.CORE-TELEPHONY-51

Size: 4.1 MB

System Impact:
Time to apply approximately 10 minutes

Does update application force reboot: Yes

Other Impacts: None

Limitations: None

Update Removable: No

Description:
-----------
The following issues are addressed.

1. Auto Attendant plays incorrect greeting.
   Incoming calls on T1 E&M auto answer trunks hear the generic
   greeting "enter the mailbox number or press # for company 
   directory" when answered by the auto attendant.This update 
   corrects the issue.
   wi00926630

2. Intercom keys get stuck.
   Set displays "No free buttons" while going off hook or trying to
   seize the line after a TAT scenario. No calls can be made or 
   received from the problematic set. This update corrects the issue.
   wi00907906


This update includes the content of the following superseded updates:

BCM450.R600.CORE-TELEPHONY-44
=============================

1. Intercom key shows in use when there is no current call activity.  
   The intercom key will light up, as if on an active call, even
   though the call in question is no longer active.  This update
   resolves reports of this issue.
   wi00895197

2. CLID is not always displayed on sets.
   Incoming central office PRI calls that tandem from one BCM over
   SIP trunks to another BCM may intermittently display CLID on the
   destination set.  This update resolves reports of this issue.
   wi00861084

3. BLF (Busy Lamp Field) indication on KEM's (Key Indicator Module) 
   does not update after a set performs a Page.  
   When a DN that has a BLF appearance on other sets performs a page,
   the BLF appearance on the other sets will show busy.  When the DN
   releases the Page, the BLF appearance will still show in use.  If
   the DN that announced the Page, changes status (goes off-hook then
   back on-hook) the BLF condition is reset.  This update resolves
   the issue of the BLF appearance showing busy after the DN
   completes the Page.
   wi00897403

4. Last number redial sends partial digits on analog trunks
   When the Last number redial feature is invoked not all digits are dialed.
   wi00890435

This update includes the content of the following superseded updates:


BCM450.R600.CORE-TELEPHONY-32
=============================

1. Analog trunk lockup for UK market profile
   An enhancement which allows the end user to set the disconnect supervision detection time 
   for the UK market. The lockups were occurring because the PSTN was sending  a disconnect
   event that was too short to be detected.
   wi00728913

2. PRI Lines cannot be assigned to BlocA
   Change VoIP lines from BlocA to BlocB and try to move PRI Lines to BlocA. 
   The PRI lines cannot be assigned to BlocA and the only available options are BlocB through F.
   wi00830849

3. KEMs reboot when moving lines using Feature *81
   On sets with 3 or more KEMS connected using Feature *81 to perform multiple line moves 
   can cause all KEM modules on the phone to reboot forcing previously moved lines back
   to their original location.
   wi00817292

4. Cannot select facility for External Autodial in EM
   When programming an autodial using Element Manager one
   is not prompted to enter what facility should be used
   (Routing Table, Prime Line, Line Pool). 
   wi00728895

5. When TAT call is answered held call is dropped.
   A call from BCM1 to BCM3 (tandemed through BCM2) is rerouted back to 
   BCM2. TAT happens between BCM2 & BCM3 and the corresponding trunks 
   are released. Now, when the call is put on hold (Hold_normal), the
   trunk (from BCM2 to BCM1) releases the call. 
   wi00881330

6. Unable to leave VM when Telephony Audio Collection Service is activated.
   When the Telephony Audio Collection Service (TACS) feature is invoked on a
   set and we try to invoke any Voice mail  on the same set, the voice mails
   sent to the called set do not get delivered. 
   wi00869535

7. Sets can only answer 1 call at a time even if multiple intercom keys are configrued.
   A Set is configured with Multiple Intercom keys. The first call lands on
   the set through a TANDEM scenario involving TAT. When a second new call
   comes in, instead of appearing on the next available intercom key, the
   call appears/blinks on the same intercom key where the first call is
   present.When we try to answer the second new call by pressing the
   blinking key the second call doesn'tget answered. This only affects
   incoming calls.
   wi00873407

8. Element Manager hangs when changing T1 line type.
   When chainging T1 trunk types for Inactive T1 channels Element manager can
   hang for 5 minutes before the operation compoets. Only  one line can be changed 
   at a time. One He must reboot the BCM in order to configure the next line.
   wi00862425

9. Analog Set will ring continuously (FNA) or provide dead air (FB).
   A Call comes into an analog trunk of the SRG50 5.0. The trunk rings on 
   a Normal Mode set registered to the CS1K's Signalling Server. The Normal
   Mode set is configured to forward calls to analog set on the SRG50. The
   Analog Set is configured to Forward No Answer or Forward Busy calls to
   the CS1K's CallPilot. The signalling protocol used on the IP Trunks is SIP.
   When the Analog Set is busy the caller receives dead air. 
   When the call is forwarding with no answer the set continues to ring continuously.
   wi00854371

10. Intermittent incoming call drops when ringing Call center agent at BCM.
    Intermittent incoming PRI calls to Call centre agents are dropped  when answered. 
    wi00882451


BCM450.R600.CORE-TELEPHONY-12
-----------------------------

1. 8x16 has 4 ports stuck in enabling
   After upgrade to BCM 6.0 the upper four ports of an 8 port 
   analog trunk card will not enable. This affects GATM 8,
   8x16, and ADID8 modules.
   wi00728891

2. On hold calls drop when attempting to pick up.
   Tandem calls dropped after being placed on hold when 
   TAT feature is enabled
   wi00728884

3. No ring back on tandem calls
   Incoming target line calls to a BCM 450 that tandem over
  point to point T1 trunk trunks to a BCM 50  ring twice 
   then disconnect if not picked up within the 2 rings.
   The calling party does not hear ringback tone.
   wi00819848


BCM450.R600.CORE-TELEPHONY-8
----------------------------

1. IP set display is inconsistent across IP set models         
   The key description for IP sets is inconsistent across different IP set models. 
   For example the dexcription for an intercom key on an 1120 set says "IC" + the set DN
   wile on an 1140 the description says "Intercom" 
   BCMRELEASE-1074

2. SIP calls to PSTN through BCM fail if longer than 10 seconds
   wi00729169

3. MWI, tone OR lamp, for analog phones on ATA2 not working.
   Q02079632-02, wi00728926 

