oftware Update Name: BCM.R400.223-OAM 

Applicable H/W Platforms: BCM1000, BCM200, BCM400, SRG200 1.5, SRG400 1.5

Applicable S/W Platforms: BCM 4.0, SRG 1.5 based on BCM 4.0 

Category: GEN 

Installation Recommendations:
This update should be applied to all new installs of BCM 4.0 and SRG 1.5 systems 
based on BCM 4.0. Existing installations should have this update applied if they are 
experiencing any of the issues that are corrected. There is no need to schedule specific 
maintenance to apply this upgrade if there are no reported issues. In those cases, systems 
should be updated at the next regular service opportunity.

The Element Manager must be downloaded and installed after applying this update.

Component & Version:
   core-telephony-provider 41.00.32.96
   mof-db		   3.91
   bcmEMcartridge	   3.91

Dependencies: 
  Required Updates:
                    BCM.R400.SU.System.011 or later
                    BCM.R400.217-CoreUploadProvider

  Updates should be applied in the order below:
                    BCM.R400.SU.System.011-200804
                    BCM.R400.217-CoreUploadProvider

  Product Dependencies: None

Size: 9MB

System Impact: 
   Time to apply approximately 20 minutes
   Does update application force reboot: Yes
   Other Impacts: None

Limitations: None

Update Removable: No

Description:
-----------
The following issues are addressed:

1. Element Manager times out trying to add destination codes if 
   over 400 Routes and Destination codes are already 
   configured.
   As more destination codes and routes are configured, the 
   response times from the BCM increase quite dramatically,
   until the element manager finally times out before the 
   programming was completed. Timeout occurs after there
   are more than 400 dest codes in the system. 
   Q01790838

This update includes the content of the following superseded updates: 

BCM.R400.198-OAM
----------------
1. Remote Scope Read Only
   At the Configuration -> Data Services-> DHCP Server -> Subnets -> Add button, 
   the "Subnet Mask" field was Read Only.
   Q01868897
 
2. Help link is wrong for 'ignore in-band DTMF in RTP' 
   At the Configuration -> Resources -> Telephony Resources -> IP Trunk Setting,
   when hovering over the "Ignore in-band DTMF in RTP" option, the help text was 
   displayed with the wrong messaging. The message is corrected.
   Q01831506

3. EM Version inconsistency
   Different EM releases follow different version naming rules such that an 
   EM version from one release is not comparable with the version number of 
   another release, even though the frameworks are the same. To resolve the 
   issue, a new version naming is defined and is being applied for all 
   releases such that the EM version for different releases become comparable. 
   Consequently, the Help screen is updated to show the EM version.
   Q01814447

BCM.R400.150-GAP
----------------

1. This patch adds a privilege to the BCM called SetProgramming. The 
   SetProgramming privilege will have access to the following Element 
   Manager Screens:
   Welcome 
   Current User 
   Active Sets: Line Access, Capabilities and Preferences, Restrictions
   Active Applications DN: Line Access, Capabilities and Preferences, Restrictions
   Inactive DNs: Line Access, Capabilities and Preferences, Restrictions
   All DNs: Line Access, Capabilities and Preferences, Restrictions
   Q01788687-01 

2. IP Set type 1110 support in Element Manager
   Q01764255-01

3. Issue with Element Manager installed on a French-enabled PC
   When starting the EM installed on a French-enabled PC (regional settings 
   set to French Canada or any other French language region), some incorrect 
   text is displayed ("Panneau de navigation d???l??ment").
   This update ensures that French text will be properly presented in the EM.
   Q01535611

4. Button mapping is incorrect for M7310 graphical representation 
   When programming buttons on an M7310 set with the Element Manager, 
   the buttons were incorrectly numbered. The button #11 was missing and 
   there was a non-functional button numbered 35. This update adds button 
   #11 and deletes button #35.
   Q01725188


BCM.R400.061-OAM
----------------

1. Line Tuning For BCM 4.0
   This update introduces the line tuning feature for the BCM 4.0 product.
   Q01475421

2. Feature Enhancement for BRI EURO Protocol to work in both S-T 
   and T-T user mode.
   Q01296708-05

3. After upgrade to BCM4.0 WAN PPP link does not come up. The problem 
   is due to no option provided to configure NONE Authentication. This patch 
   corrects the problem adding the NONE option to Element Manger. 
   Q01500035 & Q01531731


BCM.R400.036-ElementManager
--------------------------------

1. Element Manager Freeze
   After a restore operation, Element Manager can freeze with a small dialog box
   visible that cannot be closed. To close the Element Manager application, the 
   End Task button must be used from the Windows Task Manager.
   Q01396834-01

2. After a restore operation, the user is unable to select the configuration tab.
   After a restore operation, if the user selects the Configuration tab, the screen
   navigation tree does not update to allow the user to select configuration screens.
   Element Manager must be shut down and restarted to resume normal operation. 
   Q01396834-01

3. Ignore in-band DTMF in RTP
   On the "IP Trunk Settings" tab in the Element Manager there will appear a 
   new option "Ignore in-band DTMF in RTP". When enabled, this will cause
   the Voice CTI applications (including Voice Mail applications, IVR and 
   Call Center) to ignore any in-band tones received over a VoIP trunk call 
   that are encoded in the RTP. This setting should be enabled when the 
   far end is a Call Server 2000 (CS2K) and Packet Voice Gateway (PVG) 
   combination, where the PVG is provisioned for OOBDTMFSupp=FullSupport, 
   resulting in the PVG + CS2K sending out of band, as well as in-band, 
   DTMF tones at the same time to the BCM. The PVG MAY not send both 
   tone notifications depending on whether the call is using G711 and 
   depending on what the SN0 version is. 
   Q01376707-01

