Software Update Name: BCM.R400.340-CTE
 
Applicable H/W Platforms: BCM1000, BCM200, BCM400, SRG200 1.5, SRG400 1.5

Applicable S/W Platforms: BCM 4.0, SRG 1.5 based on BCM 4.0
 
Category: GEN
 
Installation Recommendations:   
This update should be applied to all new installs of BCM 4.0 and SRG 1.5 systems
based on BCM 4.0.  Existing installations should have this update applied if they are 
experiencing any of the issues that are corrected. There is no need to schedule 
specific maintenance to apply this upgrade if there are no reported issues.  
In those cases, systems should be updated at the next regular service
opportunity. It is mandatory to remove the CTE client from the host computer and 
re-install the CTE client from the new patch applied to BCM system.


Components and Versions:
 
   cte 7.11.11.10
   lan-cte-client 7.11.10.10
   lan-cte-provider 7.11.10.10
  	
 
Dependencies: 
   Required Updates - None
  
   Product Dependencies - None
 
Size: 2.70 MB
 
System Impact: 
   Time to apply approximately 20 mins
 
   Does update application force reboot: Yes
 
   Other impacts: None
      
Limitations: None
 
Update Removable: No
 
Description:
-----------
The following issues are addressed:

1. TAPI application unable to reconnect to CTE Service intermittently.  
   When a TAPI application disconnects from the LANCTE client, LANCTE fails to
   release the resources intermittently. This leads to a TAPI lines unavailable
   issue when the TAPI application attempts to reconnect the system.
   This update resolves the issue. 
   wi00823851

This update includes the content of the following superseded updates:

BCM.R400.330-CTE
----------------

1. BCM Monitor shows incorrect status of IP Trunks.
   When an external outgoing call is made, from a set, and released quickly
   before the far-end responds, then the trunk status under BCM Monitor is
   shown incorrectly as active. This update resolves the issues as the necessary
   code changes are made in CTE which updates the trunk status correctly.
   Q02137864

BCM.R400.231-CTE
----------------

1. Unable to hold and join the call with TSP
   The TSP has a connected inactive call reference when an Auto Privacy OFF
   feature is being used to make a conference call. This update corrects the
   problem by having a condition in the code where the bridged shared lines
   are used. 
   Q01880534 

BCM.R400.179-CTE
-----------------

1. Telephony applications reacting incorrect devices. Telephony applications
   also controlling incorrect devices. 
   CTE Applications that monitor or control BCM devices are receiving  
   inconsistent call progress events for different devices. This update
   will resolve the problem.  
   Q01824811

BCM.R400.078-CTE
----------------

1. VoIP Lines not monitored; do not present call info to console.net
   LAN CTE appears not to be monitoring all of the VoIP trunks.  Trunks that
   are not being monitored are also not being presented. This update corrects
   this issue.
   Q01588113, Q01502372-01

2. CTE - TransmitDigits API Correction
   When the CTE API TransmitDigits is used to send a string of more than 1
   digit, it returns a SUCCESS immediately after dispatching the first digit in
   the string. Since any of the subsequent digit transmission could result in a
   failure, ideally the API should return SUCCESS only after transmitting the 
   entire string of digits. This update corrects this issue.
   Q01449385-01

3. Client Installer removes old versions of LAN CTE files that conflict with 
   new versions.
   Q01404399 

4. System events not being processed by system event handler.
   Q01408365

5. Application shutdown can cause a crash during cleanup.
   Q01404466

6. Translation of accelerator keys in Windows message loop.
   Q01403876

BCM040.025-CTE-CTI
------------------

1. CTE Crashes on target line calls with 10 digits.
On systems configured with Target Line DN's greater than 7 digits CTE
can crash.

Theses additional symptoms will also occur.

- The CPU shows 100% use and is affecting IP sets and AA. 
It lasts about 10 mins then everything works again. 

- IP sets - cutting in and out, long delays.
- AA - voice is scratchy
- Line monitor doesn't work on this BCM from any PC but does work on other
BCM's.
Q01420757


2. CTI reports only 8 DNIS digits when the CO sends 10.
Although the CO is sending 10 digits, CTI and CTE are only reporting 
the leading 8 to applications.

Contact Center configured with the "DNIS Routing sub-feature" will not
function correctly if the DNIS is more than 8 digits.
Q01423730


3. CTE reports only 8 DNIS digits when the C O sends 10
Although the CO is sending 10 digits, CTI and CTE are only reporting 
the leading 8 to applications. 

Client side applications that depend on DNIS information will not 
function correctly if DNIS is configured for more than 8 digits.
Q01423730-01
