Software Update Name: BCM050.200-CDR

Applicable H/W Platforms: BCM50, BCM50a, BCM50e

Applicable S/W Platforms: 1.00.2.04g, 1.00.2.04j 

Category: GEN

Installation Recommendations: 
This patch should be applied to all new installations of BCM M50 R1.
Existing installations should have this patch applied if they are
experiencing any of the issues that are corrected. There is no need 
to schedule specific maintenance to apply this upgrade if there are
no reported issues. In those cases, systems should be updated at the 
next regular service opportunity. 

It is recommended to remove the CDR client from the host computer 
and  download and re-install the CDR client from the BCM system once 
the update is applied.

Component & Version: 
   cdr			40.1.09.10
   cdr-client		40.1.09.10
   cdr-provider		40.1.09.10

Dependencies: 
   Required patches - None 

   Product Dependencies - None

Size: 6.8MB

System Impact: 
   Time to apply approximately ~ 5 minutes

   Does patch application force reboot: No

   Other: None

Limitations: None

Patch Removable: No

Description:
------------

The following issues are addressed.

1. CDR push failures after FTP server is rebooted
   This patch resolves the CDR push failure if the ftp server 
   is rebooted.
   Q01892101


This patch includes the content of the following superseded patches: 

BCM050.162-CDR
--------------

1. CDR shows call duration incorrectly for some calls.
  This patch resolves showing incorrect call duration in CDR records
  for both Norstar and SL-1 report format.
  Q01511761

2. CDR DN number is incorrect for the SL1 record format for variable DN length.
  This patch resolves the incorrect DN number issue seen in SL1 record format
  for variable-length DNs.
  Q01512744-02.

3. CDR Pull Client will only work to default destination folder.
  This patch resolves the issue of installing CDR Client in different 
  paths and different drives on a Client system.
  Q01529733-03

BCM050.107-CDR-1.0-1.0
----------------------

1. Improper reporting in Norstar record format for an incoming PRI-NI calls
   This patch resolves the issue of improper reporting of source or 
   destination information of incoming PRI-NI calls when the Norstar 
   record format is used.
   Q01405973.

