Software Update Name: BCM050.R300.SU.System-169.200903

Applicable H/W Platforms: BCM50, BCM50a, BCM50e, BCM50b, BCM50ba, BCM50be, SRG50

Applicable S/W Platforms: 6.0.2.05, SRG50 R3

Category: GEN

Installation Recommendations:
This update should be applied to all new installs of BCM50 R3 and SRG50 3.0. 
Existing installations should have this update applied if they are experiencing any 
of the issues that are corrected. There is no need to schedule specific maintenance 
to apply this upgrade if there are no reported issues. In those cases, systems should
be updated at the next regular service opportunity.

The latest Desktop Smart Update should be applied with this update if the affected desktop 
applications are used.

The Element Manager must be downloaded and installed after applying this update.

Components & Versions:

   apache 2.0.63.6
   bcmEMcartridge BCM50R3.3.81
   bsp-mtd 1.2.23.1.2
   cdr 1.2.288.4.108
   core-telephony 1.2.44.2.21.28
   core-telephony-provider 1.2.291.4.95
   cte 1.2.268.2.12
   cteapps-obt 1.2.1.2.1
   cti 50.2.294.4.52
   dialogger 43.1.292.3.107
   doorphone 1.2.2.53.2
   dsp-firmware 1.2.22.120.210.24
   element-manager 60.1.0
   feps 1.2.282.27.76
   gap 1.2.15.2.9
   iptelprovideragent 1.2.290.26.79
   lan-cte-provider 1.2.27.2.2
   lan-provider 1.2.291.3.77
   mgs 1.2.285.26.80
   mof-db 3.65.96
   osa 43.1.130.1.75
   os_elsie_timezone_32.tgz os_elsie_timezone_32.4
   psm 1.2.295.1.9
   recovery 1.2.279.5.99
   recovery-config 1.2.95.9.15
   scd 50.0.1.101.11.6
   set-template-provider 1.2.0.7.6
   set-template-provider-init 1.2.0.11.2
   software-management 50.0.221.5.53
   software-management-provider 1.2.294.6.107
   srg 1.2.293.4.90
   utps 1.2.283.26.75
   voicemail 43.2.275.26.89

  Constituent Updates:
  ===================

  New updates for this SU:
  ------------------------- 
  BCM050.R300.ELEMENT-MANAGER-156
  BCM050.R300.RECOVERY-CONFIG-147
  BCM050.R300.CDR-142
  BCM050.R300.CORE-TELEPHONY-DIALOGGER-134


  Updates from previous SU:
  --------------------------
  BCM050.R300.SOFTWARE-MANAGEMENT-PROVIDER-136
  BCM050.R300.SET-TEMPLATE-129 
  BCM050.R300.OAM-124
  BCM050.R300.MESSAGE-FORWARDING-123
  BCM050.R300.SRG-122
  BCM050.R300.VOICEMAIL-111
  BCM050.R300.DSP-FIRMWARE-107
  BCM050.R300.CORE-TELEPHONY-105
  BCM050.R300.VOICEMAIL-100
  BCM050.R300.FEPS-98
  BCM050.R300.CORE-TELEPHONY-95
  BCM050.R300.FEPS-94
  BCM050.R300.LAN-PROVIDER-92
  BCM050.R300.UTPS-91
  BCM050.R300.DOORPHONE-88
  BCM050.R300.SRG-87
  BCM050.R300.DSP-FIRMWARE-85 
  BCM050.R300.CORE-TELEPHONY-84
  BCM050.R300.BSP-81
  BCM050.R300.APACHE-80
  BCM050.R300.MESSAGE-FORWARDING-78
  BCM050.R300.VOICEMAIL-77
  BCM050.R300.LAN-PROVIDER-76
  BCM050.R300.DSP-FIRMWARE-66
  BCM050.R300.OAM-65
  BCM050.R300.CTI-64
  BCM050.R300.SOFTWARE-MANAGEMENT-63
  BCM050.R300.CORE-TELEPHONY-56
  BCM050.R300.ELEMENT-MANAGER-51 
  BCM050.R300.FEPS-46
  BCM050.R300.UTPS-43
  BCM050.R300.SRG-37
  BCM050.R300.TIMEZONE-36
  BCM050.R300.SOFTWARE-MANAGEMENT-32
  BCM050.R300.SRG-29
  BCM050.R300.VOICEMAIL-27
  BCM050.R300.DSP-FIRMWARE-26
  BCM050.R300.CDR-24
  BCM050.R300.GAP-23
  BCM050.R300.FEPS-22
  BCM050.R300.CTE-18
  BCM050.R300.SOFTWARE-MANAGEMENT-16
  BCM050.R300.APPP-14
  BCM050.R300.VOICEMAIL-13
  BCM050.R300.PSM-12
  BCM050.R300.CORE-TELEPHONY-PROVIDER-9
  BCM050.R300.CORE-8
  BCM050.R300.CTI-3
  BCM050.R300.FEPS-2

Dependencies:
   Required Updates: 
   - BCM050.R300.SOFTWARE-MANAGEMENT-63

  NOTE: The dependency above is only required if the last System Smart Update 
  applied to the BCM is one of the following:
  - BCM050.R300.SU.System-21.200801
  - BCM050.R300.SU.System-25.200802
  - BCM050.R300.SU.System-28.200802 

   Updates should be applied in the order below:
   - BCM050.R300.SOFTWARE-MANAGEMENT-63 if necessary
   - BCM050.R300.SU.System-169.200903

   Product Dependencies: None

Size: 180.52 MB

Size of changed content since last Smart Update: 122 MB

System Impact:
   Time to apply approximately 10 minutes
   Does update application force reboot: Yes
   Over last Cumulative Smart Update: Yes
   Over default content:              Yes

Other Impacts: 
   All services will be unavailable during the update until the system reboot completes.
   
   BCM 3.1k audio (modem) calls may not work after the installation of this update.
   Solution: Set the new button "Force G.711 for 3.1k audio" to 'on'. 

Limitations: 
   The LED of an IP set with OBT message display does not blink when paging is
   done.  When paging is done to an IP set which has an OBT message displayed on it, its
   LED doesn't blink. However, in the absence of the OBT message, the same set's LED 
   blinks, as is expected.  
   Workaround: None.
   Q01778697
 
   All Mailbox Manager Message Forwarding pages have the "Main", "Logout" and "Help" 
   buttons in English regardless of the language being used. All other text on the 
   Mailbox Manager Message Forwarding page is translated according to the language 
   being used.
   Workaround: None
   Q01902938

   1200 series set support has been introduced in CS1000 Release 5.5 and later releases. As a
   result, SRG50 R3 systems should be connected to CS1000 Release 5.5 and later releases to 
   offer both normal mode and local mode operations for 1200 series sets. If the CS1000
   main office is not running on release 5.5 or later when this update is applied to the SRG50 R3
   system, the 1200 series sets connected to the SRG 50 R3 will remain in local mode and will have
   to be manually redirected to normal mode once the CS1000 is upgraded to release 5.5 or later. If
   the CS1000 main office is already running Release 5.5 or later when this update is applied, then
   this limitation does not apply and the 1200 series sets can be redirected to normal mode
   using the same procedures as for other IP sets.

   Please download and install BCM Element Manager (EM) from your BCM, to prevent the
   following limitation: With older versions of the EM and Java VM, EM may display an incorrect 
   time during a two-hour window surrounding the time transition from/to daylight savings time.
   The time on the BCM and displayed on sets is correct at all times. Note: Do not manually 
   correct the Element Manager's time setting during this two-hour window as it may result in  
   incorrect times on the BCM.

   When setting the BCM time using the EM, discrepancies between the BCM 
   understanding of DST and that of Java may result in the time being set differently from what
   was entered.  This limitation only occurs if you set the time on the transition day to/from DST.  
   For example, when setting the time for the "Australia-Adelaide" time zone when the date is 
   currently Oct 5 2008, the time will be set one hour later than what was entered (Entering 5:00am
   in the EM will result in the time on the BCM being set to 6:00am).  This limitation does not 
   occur when using other methods to set the time, such as using NTP, Trunk time, or set-based 
   administration.  Workaround: If the time must be set during this interval, then add an appropriate
   offset when setting the time using EM; alternatively, use set-based administration to adjust the 
   time.

   When a Unified Messaging group list message is created by attaching multiple bodies 
   including at least one fax body, the Message Forwarding emails contain only the first body.
   Workaround: Send a separate group list message for each fax body.
   Q01893742

   Voicemail will receive Digital Networking(VPIM) messages from a Networking Site if the 
   Enable Network Receive setting is disabled. The Enable Network Receive setting is enabled 
   by default in the CallPilot Manager General Networking Properties page.
   Workaround: None
   Q01896169 

   Updating the CDR Prefix filter does not update prefix number properly. The Prefix list will not take 
   effect until the Report Filter type is changed.
   Workaround: When the Prefix list is updated, the Prefix Filter Type must be updated for the 
   change in the Prefix list to take effect. This issue will be addressed with the future software update.
   Q01983902

Update Removable: No


Software Update BCM050.R300.ELEMENT-MANAGER-156 Description:
------------------------------------------------------------

- Alignment between different versions of Element Manager application
  The versions of the Element Manager application packaged with
  different BCM platforms do not align. This causes difficulty in
  determining which Element Manager version is most recent. 
  This update addresses this issue. 
  Q01884217

- Generic BCM Element Manager Cartridge under Help->Help Contents menu 
  The Help->Help Contents menu shows a generic BCM Element Manager Cartridge 
  label for a BCM50R3 cartridge. This can cause help to not be accessible if
  a BCM450R1 cartridge is also installed.
  Q01946972-02

- Buttons on M7324N do not correspond to the template in Element Manager
  M7324N programmable buttons presented in Element Manager did not correspond
  to the actual set. This update resolves the issue.
  Q01911160


Software Update BCM050.R300.RECOVERY-CONFIG-147 Description:
------------------------------------------------------------

- Software Update History included with logs 
  As an aid to any future problem diagnosis, the Software Update History is included 
  when the logs are collected.
  Q01936481-02

- After taking a backup, a domain is added on the "Client privileges" tab
  of LAN CTE, and it remains visible in Element Manager after a restore operation.
  This update resolves the issue.
  Q01857332-01


Software Update BCM050.R300.CDR-142 Description:
------------------------------------------------

- CDR service is going down unexpectedly
  When an application other than a CDR client connects to 
  the BCM on the Port reserved for CDR, the CDR Service goes down. 
  This update resolves the issue by removing the error handling which
  causes CDR to go down.
  Q01884976-01

- No CDR data when using a prefix filter without account codes
  When using CDR and selecting a filter type of "prefix" only calls using
  account codes (F900) are appearing in CDR data. Call that match the
  "prefix filter" that do not use account codes (F900) are not captured by
  CDR. This issue is due to mismatch between the values of filter types in
  the mof file and CDR code. This update resolves the issue by making the
  value mapping of different filter types same in both mof file and CDR code.
  Q01943234

- CDR push failures after FTP server rebooted
  CDR Datafiles are sent to an FTP server daily. The FTP server is rebooted 
  and after that the problem of CDR Datafiles not being sent starts to 
  occur. This update resolves the issue by setting an alarm before 'send' 
  process and resetting it after the process. So that kernel will generate 
  a signal after 90 seconds and that signal is handled to exit out of the 
  loop, which stops the CDRTransfer process from running continuously.
  Q01892101-01


Software Update BCM050.R300.CORE-TELEPHONY-DIALOGGER-134 Description:
---------------------------------------------------------------------

- Adding new feature BCM Analog Programmable Interface
  This feature adds the support for the configuration of Analog Trunk and Station
  related parameters through the Parameterization tool.
  Q01959899


Element Manager moved from Desktop SU to System SU:
-----------------------------------------------

To remove circular dependencies, the Element Manager client has been
moved from the Desktop SU to the System SU.


Software Update BCM050.R300.SOFTWARE-MANAGEMENT-PROVIDER-136 Description:
-----------------------------------------------

- user id and password stored in cleartext within log file during software updates
  The SoftwareUpdateProviderAgent.log records the user id and password in 
  cleartext when retrieving patches from remote locations. Exposure of this 
  information is an issue because this log file is included in the Log Collection 
  utility and then shipped off the BCM for browsing. Anyone looking at this file on 
  their PC will be able to see the user id and password.
  Q01927648-01


Software Update BCM050.R300.SET-TEMPLATE-129 Description:
-----------------------------------------------

-  Add facility for Scheduled Reboot
   Provide the user with the means to schedule a reboot.  In the Business Element 
   Manager, a reboot screen has been added in the Administration tab under the 
   Utilities Panel.
   Q01812428-01

-  Add facility for BCM Set Template to provide the administrator with the 
   ability to set telephony parameters in a bulk fashion. 
   Q01911855

-  Add facility to provide administrator with automated Line and Set parameter 
   renumbering capability. 
   Q01911855

-  Add new user account privilege, Set Programming. 
   Q01911855

- BRI Auto Answer setting is not available
  Within Element Manager->Configuration->Telephony->Lines->Active Lines 
  (or Inactive Lines)->Preferences the Answer Mode is not configurable
  as either Auto or Manual.
  Q01927019

- Calls get disconnected after about 30 seconds
  In the Australian profile, where a BCM is connected via PRI QSIG to 
  a Nortel Passport 4400/7480, any international calls will disconnect 
  after 30 seconds if they are not answered.
  Q01898555-01

- "Message for you", "line 9 called" displayed intermittently on sets
  If there is a pending voice mail message on a set ("Msg for you" on
  the display) and an outgoing call is made on line 167, once the far
  end answers the call,  "Msg for you", "line 9 called" will be 
  displayed.
  Q01875614-01

- Getting "Not in Service" at times when using external Auto Dial Key
  Intermittently when using the external Auto Dial, a "Not In Service"
  error is returned for outgoing calls.
  Q01904250-02

- Turkey Market Profile addition in BCM50 R3 stream.
  This update adds support for the Turkey market profile in
  the BCM50 R3 product. Support for GASI/GASM/ATAII/GATI/GATM for Turkey
  profile is added.
  Q01821382-02, Q01935060

- Delay Dial Tone on GASI port
  When a Digital cordless telephone is BT Diverse 6210  and is
  connected to any of the GASI ports, there is an 8-10
  seconds delay in receiving dial tone after going off hook.
  Q01865029

- Scheduled Reboot Operation
  To utilize the Scheduled Reboot feature, in the Element Manager, navigate to the 
  Reboot screen located in the Utilities folder that is available on the Administration tab.

- BCM Set Template Feature
  This feature allows administrators to combine a number of set parameter settings 
  into a template that may be assigned to any number of sets on the BCM. 

  This feature provides administrators with the ability to create, and modify and 
  delete Set Templates. The template application is accessed in Telephony
  part of the Configuration frame under Sets.

  The complete user documentation for the BCM Set Template feature can be found at 
  the http://nortel.com website. Refer to document number NN40010-676.

  Note: If a set that is part of a template has parameters changed via set based
      administration or the Element Manager Configuration-Telephony-Sets panels, the 
      set will be removed from the template.
      The user documentation may lead users to believe that this removal is immediate.
      In reality, the removal will occur within 24 hours after the change in set programming
      occurs.

- Line and Set Parameter Renumbering
  Set and line parameters, including voice mailbox DNs can be renumbered using the
  renumbering feature.

- Set Programming Privilege
  When Accounts are assigned to the Set Programming group, that user only has access to the
  Telephony -> Sets folder and their own account (for password changes).


Software Update BCM050.R300.MESSAGE-FORWARDING-123 Description:
-----------------------------------------------

- Message Forwarding Not Working with TLS or non standard ports
  The Message Forwarding feature was originally released to support Outgoing 
  SMTP Mail/Proxy Servers that do not require TLS (Transport Layer Security) 
  and it's predecessor SSL (Secure Sockets Layer). The feature was also designed
  to only support the standard SMTP TCP/IP port 25 (Simple Mail Transfer Protocol 
  Transmission Control Protocol/ Internet Protocol) and the SMTP AUTH LOGIN and 
  PLAIN authentication mechanisms. Some Internet Service Providers (ISP) require 
  TLS, SSL or non-standard SMTP TCP/IP port numbers for outgoing mail for security
  purposes. This update adds support for TLS, SSL and non-standard SMTP TCP/IP 
  port numbers for outgoing mail. Contact your mail server administrator for 
  more information about the requirements of your Outgoing SMTP Mail/Proxy 
  Servers.
  Q01933637


Software Update BCM050.R300.OAM-124 Description:
-----------------------------------------------

- Unable to Hear Voicemail Tone from IP set 
  Calls originating from an IP set on the BCM cannot leave a Voice Message as the tone is 
  not being presented correctly. The loss of the voicemail tone is due to the fact that this 
  particular voicemail tone is detected by the BCM DSP as DTMF tone and therefore ripped 
  off the media by the DSP task. The detected DTMF tone event is sent to BCM IP-client server
  through a signaling channel but the BCM IP-client server does not process this event. 
  This fix is to update BCM IP-client server to optionally play inbound DTMF tones to the IP-client. 
  A new check-box flag is added to BCM Element Manager to enable this option.
  Q01876046

- EM does not allow Dial by Name (F963) button programming
  A user programs "Dial by Name" Feature [F963] as a feature key on Digital/IP set using 
  the "Button programming features" (F*3). Subsequently, if EM is used to access/modify
  the Button Programming table, then any tabs after the button programming table are all 
  permanently grayed out and cannot be configured.
  Q01892141


Software Update BCM050.R300.SRG-122 Description:
-----------------------------------------------

- IP set 1120E is not registering to SRG  
  Inclusion of new firmware files for 1120e, 1140e, 2007, 2002 and 2004 
  Phase 2 IP sets. The following firmware is being included in the BCM50
  3.0 build for 1120e (0624C4N), 1140e (0625C4N), 2007 (0621C4V), 
  and 2002/2004 Phase 2 (0604DBP) IP Sets.

  This update corrects a condition where SRG 1100 series sets registered in 
  normal mode to the CS1k were upgraded to C6E firmware and later redirected 
  back to the SRG in local mode. When the SRG attempts to push older firmware 
  to the phone and consequently causes a firmware loop to occur. This update will 
  load C4N firmware to the SRG and will correct this issue.
  Q01929062


Software Update BCM050.R300.VOICEMAIL-111 Description:
-----------------------------------------------

- Expected wait time not working properly on ACD
  With the first incoming call answered by an agent, and when none of the
  agents are ready to receive the next incoming call, subsequent incoming
  calls should go to the queue and the caller should get the greetings in
  accordance with the respective estimated Expected Wait Time (EWT), but 
  for the second call, the EWT call timer is jumping to the last greeting of
  the EWT table instead of playing the correct sequence. This update will 
  resolve the issue.
  Q01911361


Software Update BCM050.R300.DSP-FIRMWARE-107 Description:
-----------------------------------------------

- T.38 fax on SIP trunks to CS1k fails
  The CS1K Release 5.5 sends image data in a T.38 t4-non-ecm-sig-end packet. In previous 
  firmware versions this would cause the EOP (End Of Page) to be transmitted to the fax
  machine incorrectly.  
  This condition is now handled properly by the BCM.
  Q01891091

- Outgoing Faxes on SIP trunks to CS1K fail
  This problem is caused if the CS1K delays the switch from a G.711 VoIP channel to T.38 fax.
  If the delay in switching is too long, then the parameters of the fax session can be 
  exchanged between the fax machines over the G.711 VoIP channel, and not through T.38. 
  This will lead to the failure of the BCM50 DSP as a result of the T.38 session not being
  established in time for the T.38 gateways to participate in the negotiation of the fax session
  parameters.
  The BCM is now protected from a delay in switching to T.38.
  Q01924090


Software Update BCM050.R300.CORE-TELEPHONY-105 Description:
-----------------------------------------------------------

- Remote MWI from CO not lighting the message waiting lamp on BCM sets.
  When an incoming call is forwarded to the Central Office voice mail, the 
  message waiting indicator is not lit on the called BCM set after the message 
  has been left.  
  Q01894588


Software Update BCM050.R300.VOICEMAIL-100 Description:
-------------------------------------------------------

- Some Mailbox Manager prompts are displayed in English for German profile
  When using a German profile get mixed languages on some pages.
  This update changes these particular prompts to German language only.
  Q01902613

- Mailbox Manager Message Forwarding help button links to English version
  Mailbox Manager Message Forwarding help button always links to the English
  version of the Message Forwarding help regardless of the language being used.
  Q01902958

- Unified Messaging Send fax no longer working for delivery receipts
  The BCM does not send the fax when Unified Messaging Fax printing is used 
  and the user selects "Receive a confirmation of delivery" in the "Compose Fax" window. 
  Q01914908

- Caller transferred to skillset via operator fails
  Under the following circumstances, when an operator transfers a caller to a skillset, it 
  erroneously goes to the skillset mailbox.
  Details: A caller calls Skillset X, there are no agents and an overflow rule exists which 
  transfers to Skillset X's mailbox. Once in the mailbox, the caller presses "0" to reach the 
  operator. The Operator receives the call and transfers the Caller to skillset Y which has
  all agents busy. Instead of getting queued, the caller returns to Skillset X's mailbox where 
  they again press "0" to reach the operator. On the second attempt with the same 
  circumstances, the call will successfully queue in Skillset Y. The above scenario has been 
  resolved so that the transfer from operator into Skillset Y will succeed on the first attempt 
  regardless of all agents being busy or available.
  Q01679216-02
 
- Call Sender shows corrupted CLID for German profile
  The "CountryLocalNumberLength" value for Germany has been hard coded as 7, but the
  DN length for Germany can be more than the present length of 7. The Call Sender feature 
  uses the "CountryLocalNumberLength" value when determining the number to be dialed. 
  Since the "CountryLocalNumberLength" was 7 there was a problem in determining the 
  correct Dialable DN for the Call Sender feature. The length has been increased to 15.
  Q01789495-02 

- Voicemail crashes with event error codes 10002 and 10230
  Two agents are on two different calls. One of them transfers the call to the other agent. 
  Now the agent who has two calls holds one of them, disconnects the other and invokes 
  F906 (supervisor help), which leads to a voicemail crash. This update resolves the issue 
  by checking for this particular scenario and display a message on the set.
  Q01848085-02


Software Update BCM050.R300.FEPS-98 Description:
------------------------------------------------

- BCM sends wrong SIP response code to INVITE when no trunks are available
  Should send "503 Service Unavailable" instead of "480 Temporarily Unavailable".
  Q01854111-01

- SIP MWI transactions don't honor "302 Moved Temporarily" responses
  Sending an MWI indication to the CS1K using the NRS, it never arrives because the 
  redirect is ignored, and the request is repeatedly re-sent to the NRS instead of the
  Signaling Server.
  Q01882153-01

- BCM calls torn down after 30 seconds if OPTIONS response is not received
  Certain tandem calls do not return far end capabilities which causes the OPTIONS
  transaction to hang, and after 30 seconds of no response, the far end is assumed to
  be unreachable, and the call is torn down. There is now a guard timer set so that an
  empty response can be sent to avoid this lockup.
  Q01891602

- Call from BCM to MCC (Cell) is released after established
  VoIP gateway (feps) was not handling vdi_alert after a progress was received, and the call
  was dropped as soon as answered because it was in the wrong state to accept it.
  Q01889182

- Interop issue between BCM50R3 SIP and MSFT Exchange for set on SCS with DND set
  No Speechpath with MSFT exchange server because of redundant re-INVITE immediately after
  answer. BCM was sending a re-INVITE after the 200 OK (INVITE) with the same parameters as
  the negotiated parameters.
  Q01819465

- Interop issue between BCM50R3 SIP and MSFT Exchange for call routing to Auto Attendant
  Same root cause as issue 5 above, except with Auto Attendant on the MSFT server.
  Q01819483

- T38MaxBitRate was being erroneously sent out as T38FaxMaxBitRate
  Incoming faxes configured as a VOIP T.38 Fax fail. An incorrect parameter
  name caused the auto-negotiation to fail.
  Q01910759


Software Update BCM050.R300.CORE-TELEPHONY-95 Description:
----------------------------------------------------------

- F**SYSID produces incorrect value
  From SBA, when user dial F**SYSID, it reproduces wrong system ID.
  Q01891994

- **OPTION for GATM2 works only after 2 Reboots instead of 1 as per the Design
  Disconnect Supervision Tone settings that are configurable under
  GATM2 parameters in **OPTION are not getting reflected with the 
  first power reboot of BCM50. It is getting reflected in the second 
  power reboot instead.
  Q01890165 

- PRI doesn't come back into service after remote alarm
  When there is a short interruption of the PRI service that results
  in a remote alarm (AIS, RAI), then the DTM Module in the BCM shows
  a remote alarm (yellow led in the upper left corner is lit) as expected.
  However, when the PRI service is re-established, the DTM Module still
  shows a remote alarm and no incoming or outgoing calls are possible.
  Remote alarm condition should be cleared on the DTM Module.
  Q01822428-01

- Calls with NO CLID cannot connect to BCM50 via H323
  When incoming call from PSTN gets tandem out over the VoIP with private route,
  call gets dropped.
  Q01883856-01


Software Update BCM050.R300.FEPS-94 Description:
------------------------------------------------

- SIP private calls from MCS to BCM require a public received number 
  BCM did not parse the private dialing numbers if the NPI/TON came only in the INVITE's
  Request URI. So BCM incorrectly used public received numbers to terminate the calls.
  Q01447030-01

- BCM SIP calls forwarded to CS1000 5.5 CallPilot with dead air
  SIP inbound calls were forwarded (CFNA) to CS1000 5.5 CallPilot over SIP trunks, but the  
  connection to the CallPilot was not established properly. This was due to BCM's 
  implementation limitation, i.e. BCM did not support SIP Update. As a result, BCM was 
  unable to forward the CallPilot media back to the call originators.
  Q01861580-01

- SIP 503 Service Unavailable vs 480 Temporarily Unavailable 
  When all VoIP trunks became busy, SIP inbound calls would be rejected by BCM with 
  return code 480 Temporarily Unavailable. The correct return code should be 
  503 Service Unavailable, which allowed CS1000 to route the SIP calls fallback to 
  PSTN over analog trunks.
  Q01854111-01

- BCM tandem calls from VOIP H323 to T1 E&M trunks no ringback heard
  After H323 inbound calls were successfully routed to T1 E&M answer supervision trunks, 
  CORE sent the call progress vdi messages back to FEPS with progress indicator 2. However, 
  this type of call progress messages was ignored by FEPS. As result, the connection
  to the inband tone was never established.
  Q01860845


Software Update BCM050.R300.LAN-PROVIDER-92 Description:
--------------------------------------------------------

- User interface for configuring DiffServ Code Point (DSCP) values
  This is an enhancement which allows customers to configure or modify 
  via the user interface (Element Manager) the DSCP (TOS byte) value of 
  locally generated IP traffic in the following areas: VoIP signaling 
  traffic, VoIP voice media traffic, T.38 fax media traffic, and video 
  media traffic. The new user interface option is located under the 
  "Configuration"->"Data Services"->"QoS" menu.
  Q01904159


Software Update BCM050.R300.UTPS-91 Description:
------------------------------------------------

- No speech path after using Hot Desking
  This problem is seen when the user tries to invoke/cancel HotDesking when the
  IPSet involved in this scenario is in Call Alerting state. The fix for this 
  issue is to disallow HotDesking when the IPSets are in 'Call Alerting' state.
  Q01809601


Software Update BCM050.R300.DOORPHONE-88 Description:
-----------------------------------------------------

- Call from doorphone only rings once when one of the Hunt Group sets is busy or uses DND
  If a Hunt Group is called, a reject event may occur if ANY of the target phones that
  are being rung are busy. This causes the call from a doorphone to be abandoned, and hence
  none of the other phones in the hunt group get an opportunity to answer it.
  To correct this, only disconnect the call attempt when it reaches the timeout period
  i.e. only allow this disconnect shortcut to paging if the user is dialing a single phone.
  Q01779415-01


Software Update BCM050.R300.SRG-87 Description:
-----------------------------------------------

- Missing Firmware Information for all IP Sets when in Normal Mode.
  The logic to support updating of firmware version of the sets in 
  element manager has been added.
  Q01510824-01


Software Update BCM050.R300.DSP-FIRMWARE-85 Description:
----------------------------------------------------------

- Italy Trunk Globalization
  GATI support for Italy market is added in this update.
  Q01883393, Q01883473


Software Update BCM050.R300.CORE-TELEPHONY-84 Description:
----------------------------------------------------------

- Post-GA-GATI/GATM for Italy Profile 
  Support is added for GATI and GATM for the Italy market profile.
  Q01821379-02

- CLID through GATM8 is broken
  CLID is not working on GATM trunks in UK profile. 
  The solution for this issue applies to both GATM-Ver1 and
  GATM-Ver2 hardware. This problem is not present for GATI trunks.
  Q01884757

- Analog trunk locks up while parking
  Analog trunks lock up while using the call park feature.
  Line status shows "line in use."
  Q01860285, Q01876848, Q01884884

- The intercom keys on the IP phone in the hunt group get locked up
  Call comes to BCM50R3 over a BRI trunk, call gets answered by the set 
  A and transfers the call to HG01. HG members sets 
  B, C and D ring. Once Set B answers the call, the intercom key of 
  sets C and D remain lit and the sets C and D are locked up.
  Q01870745

- Tandem Call from PSTN rings at the control set
  All tandem calls from the PSTN to the remote site ring 
  at the control set instead of correct extension number.
  Q01822669-05

- Partial loss of Telephony Programming post Power cut
  Loss of recently configured core telephony data may occur following a 
  coretel restart.
  Q01685795-03

- Outgoing CLID is incorrect for ISDN DNs
  After applying patch BCM.R400.SU.System.004.2007 the outgoing CLID information 
  is incorrect. Sets no longer use the assigned OLI, but instead they use OLIs from the
  inactive DNs.
  Q01808203-04

- Coretel crashes when TRO is used.
  Problem
  - Place an established internal call on hold
  - Seize a VoIP line and dial a set on a destination BCM
  - Conference the VoIP line with the held call before the destination set answers
  - The destination set is CFAC back to another set on the originating BCM. Trunk Route 
   Optimization is invoked.
  - Any further action taken by the conference master results in a coretel crash
  Q01818223-02

- Calls using the SIP Trunks not reverting to the Prime Set when WAN Link fails
  Calls that route across the Virtual Trunk using SIP, are not being redirected to the 
  Prime Set when the WLAN link is down.
  Q01833351-01


Software Update BCM050.R300.BSP-81 Description:
-----------------------------------------------

- RTP driver
  All IP network connectivity is eventually lost from the BCM/SRG when using IP 
  phones and IP trunks. This issue will affect all IP-based phones, IP trunks, 
  and applications, however TDM phones will not be affected. This loss of IP 
  connectivity typically occurs after several months of uptime. The BCM must be 
  manually power cycled to restore service.
  Q01884157-02


Software Update BCM050.R300.APACHE-80 Description:
-------------------------------------------------

- Cross Site Scripting (XSS) or Denial of Service (DoS) vulnerabilities in Apache
  Security Vulnerabilities in the Apache 1.3 and 2.0 Web Server Daemon and "mod_status" 
  Module May Lead to Cross Site Scripting (XSS) or Denial of Service (DoS). 
  More Info: http://securitytracker.com/alerts/2008/Jan/1019154.html
  Q01814487-02


Software Update BCM050.R300.MESSAGE-FORWARDING-78 Description:
-------------------------------------------------

- Message Forwarding can send an e-mail message when new or urgent messages arrive in a 
  subscribers voice mailbox. Message Forwarding can attach the G.711 linear WAV voice or fax 
  message to the forwarded e-mail message so the user can play the voice message or display the 
  fax message on the destination device. Users can forward messages to any e-mail address.

  There must be as many Unified Messaging keycode seats as there are mailboxes with all Class of 
  Services (COS) with Message Forwarding enabled. The number of mailboxes using a COS with 
  Message Forwarding do not have to be the same mailboxes using CallPilot Unified Messaging.
  Q01892146
  Feature ID: 315889


Software Update BCM050.R300.VOICEMAIL-77 Description:
----------------------------------------

- MailBoxManager issue for German Language
  MailBoxManager for German language showed English text 
  prompts instead of German prompts. This update will resolve the issue.
  Q01844967

- Changes for APPP and Intelligent Contact Center (ICC) Keycode issue
  When the APPPack keycodes were enabled, some Contact Center functions
  did not work as designed. This update addresses this anomaly.
  Q01815622

- APPP symbol kiosk URL allowed paging for null station name
  Symbol kiosk allowed paging even when the station name was made NULL in the
  URL. No check was being made for a NULL station name. A check is added for the 
  first character of station name to be alphanumeric, which checks for NULL station 
  name as well.
  Q01829664-03

- Voice quality is deteriorating
  If the BCM had more than 800 mailboxes,  voice quality would deteriorate 
  while accessing the CallPilot Manager and All Mailbox activity report. 
  This update will resolve the problem.
  Q01691889-04

- High CPU spike seen while generating mailbox report
  If the BCM had more than 800 mailboxes, CPU usage spiked to 100%,
  while generating All Mailbox activity report. This update will resolve
  the problem.
  Q01826914-02

- High CPU spike if Auto Send / Receive was configured
  If a Desktop Messaging client was configured for Auto Send/Receive, and a 
  new fax or voice message was delivered to that client's mailbox, resulting
  in more than 500 messages in that mailbox, then CPU usage would spike 
  to 100%. This update will resolve the problem.
  Q01762747-02

- Unable to service Doorphone call when Doorphone call is routed to VM
  When a doorphone call goes to voicemail, the doorphone hears greetings, 
  and is solicited to record a message or provide key input, neither of which are 
  useable functions by doorphone. The acquire action of VM prevents the 
  doorphone software from disconnecting in this situation. This update 
  resolves the issue by disconnecting the call when a doorphone call goes to 
  voicemail.
  Q01845653-02

- Localization of the message "Please Wait" for OBP fails.
  For One Button Page feature, the "Please Wait" prompt would always appear
  in English, regardless of the system language settings. This update will 
  resolve the issue.
  Q01830142-03

- Mis-routing of Calls in CallPilot using CCR and Call Center 
  Despite the user pressing the correct digits, Auto Attendant transfers 
  an external call to skillset different from the expected one.
  This update corrects the problem by resolving a timing issue.
  Q01826967-02

- Unread Skillset Message appearing in RT (Real Time) after listening 
  to VM (VoiceMail)
  Contact Center was not updating the skillset message
  counter when the message had been read and expunged. This has been
  fixed by updating the message counter in Contact Center once voicemail
  sends the expunge request.
  Q01693848-03

- Feature F970 should be registered only if an APPP keycode is applied. 
  When the APPP keycodes were not enabled, F970 was registered but
  did not work as designed. This update addresses this anomaly.
  Q01816244

- An "Agent full" error was displayed when a configured Agent tried to login
  to BCM that had Contact Center related key-codes such as ICC, 
  ICC Skill-sets, ICC Agents, MMCC, ICC Reporting, without a VM seat key-code
  installed. This condition prevented Agents from logging in to the BCM.
  Root cause for this condition was that the ICC Agents, MMCC key-codes got
  enabled only if a key-code with a lower feature code like a VM seat key-code
  was also applied. This update corrects the problem.
  Q01767731

- This update implements CIM-XML provider capabilities to change CCR Nodes
  Recordings, Company Greetings and Greeting Table CCR Tree Numbers.
  Feature ID: 315891
  Q01852606

- CallPilot Manager reports in the CDR folder
  This update makes all CallPilot Manager reports available in the CDR folder
  (/var/nn/CDRDataFiles). Those reports are generated on a nightly basis,
  around midnight.
  Feature ID: 315891
  Q01852606

- Mailbox Restrictions for the Administrator and the General Delivery mailboxes
  This update implements the ability to enable or disable Mailbox
  Restrictions for the Administrator and the General Delivery mailboxes.
  Feature ID: 315891
  Q01852606


Software Update BCM050.R300.LAN-PROVIDER-76 Description:
-------------------------------------------

- Cannot change configuration of OAM LAN interface address/mask.
  On BCM50 models with the integrated router, changing of the OAM LAN
  IP address/mask from the Element Manager does not have any effect. 
  This operation is required when the predefined OAM IP address/mask 
  is already used in the customer network.
  Q01872200


Software Update BCM050.R300.DSP-FIRMWARE-66 Description:
-------------------------------------------

- Voicemail message cuts off when in a noisy environment
  This update corrects the issue by updating the tones definition 
  exactly according to international specifications.
  Q01785034-02.
   
- Australia Call Collision
  Call collision feature is an Australian regulatory requirement. 
  For unsupervised and ROA trunks, an outgoing call is not allowed 
  within 10 seconds of receiving an incoming call.
  Q01757126-01 


Software Update BCM050.R300.OAM-65 Description:
----------------------------------

- The system name could be updated in two different  locations:
    - "Configuration -> System -> Identification" at "System name" Field.
    - "Configuration -> System -> IP Subsystem -> General Setting" at "System name" Field.
  The second option is being changed to read only now.
  Q01691332

- Different EM releases follow different version numbering rules such that an EM version number 
  from one release is not comparable to that of another release, even though the frameworks are the 
  same. To resolve this issue, a new version numbering is being defined and applied to all releases 
  such that EM versions for different releases are comparable. Consequently, the Help screen is 
  updated to show the EM version.
  Q01814447

- The instruction for system naming restrictions was wrong
  The interactive help instructions have been updated to correctly show the system naming restriction.
  Q01829794

- Adding new Disconnect OSI Timer value in New Zealand Market Profile
  Added 800, 900, 1000 and 1100 Disconnect OSI timer values for 
  NZ market profile.
  Q01724774-02

- There were some errors in removing and updating the old files, directories, 
  and shortcuts when updating the EM. These are corrected now.
  Q01810771

- The installer never copied cartridges when performing a clean install 
  (NOT upgrading) AND choosing to copy resources from previous installations. 
  The change involves copying the entire <INSTALL_DIR>BusinessElementManagerbinregistry 
  directory and all of its contents to the new installation.  
  Q01820442

- Installing a new EM and updating the EM caused more than one summary.xml 
  which resulted in losing nodes in the hierarchy tree. 
  The issue is resolved to keep one updated version of summary.xml.
  Q01820432


Software Update BCM050.R300.CTI-64 Description:
-----------------------------------

- CTIServer crashes in a TAT call scenario
  CTIServer crashes if two simultaneous TAT requests are sent by Core to CTI 
  for the same trunks in TAT-enabled tandem systems. This update corrects the 
  problem by rejecting one of the TAT request if already one TAT is in process
  Q01847192-02

- Auto attendant stops working after reboot
  Auto attendant stops working only for the first target line (TL125) after
  rebooting the BCM.  This update corrects the problem by making changes in
  Voice CTI to make the first Target Line usable.
  Q01858939


Software Update BCM050.R300.SOFTWARE-MANAGEMENT-63 Description:
--------------------------------------------------

- Allow the BCM to intelligently assess the need to reboot during update installation, 
  thereby avoiding restarting the BCM in many instances and reducing the time taken 
  to install the update.  
  Q01818948


Software Update BCM050.R300.CORE-TELEPHONY-56 Description:
---------------------------------------------

- Call Collision for Australia Profile.
  Call collision feature is an Australian regulatory requirement. 
  For unsupervised and ROA trunks, an outgoing call is not allowed 
  within 10 seconds of receiving the incoming call. This feature is implemented 
  in this update for GATI and GATM-Ver2.
  Q01745162-01
  Q01754458-01 

- Stations Globalization for Spain Market Profile.   
  Support is added for GASM and GASI for Spain profile.
  Q01836357-01
  Q01684879-06

- Adding new Disconnect OSI Timer value in New Zealand Market Profile.
  Added 800, 900, 1000 and 1100 Disconnect OSI timer values for 
  NZ market profile.
  Q01724774-02

- Trunk Globalization for Saudi Market profile. 
  Support is added for GATM-Ver2 and GATI for Saudi Market Profile.
  Q01586579-01

- Expensive Route message not displaying on overflow.
  When the VoIP trunk circuit is disconnected or fails,
  "Expensive Route" message is not displayed on the telset 
  when the call is routed over the fallback.
  Q01840161

- Tandem call forwarding using IP trunks unsuccessful for cell phone numbers.
  An outside caller calls in on a PRI to site "A" and is tandemed to site "B" over VoIP. 
  When the destination set at site B is CFAC to a cell phone in the PSTN, the
  resulting call does not go through.  
  Q01821801

- Hunt group metrics not working
  An external incoming call is answered by Auto Attendant and then
  transferred to Hunt Group. If the call is abandoned before the Hunt
  Group member answers, the Hunt Group metric for abandoned calls can
  be incorrectly decremented. This can result in large negative numbers in 
  the abandoned call metric. 
  Q01825303-02

- BCM calling CS1000 via SPS is Blocked if SIGO=ESN5 on Route
  Register the BCM as a SIP Endpoint on the SPS. Add routing
  on the BCM to allow connection to a CS1000 system in the
  network. On the SIP route of the CS1000 have SIGO set to
  ESN5. Make a call from the BCM set to the CS1000 Set.
  The call will fail if the SIGO in the CS1000 is set to ESN5.
  Q01815787

- UK market: CLID is presented after call answer rather than while ringing
  When a set is configured in 'Cap's n Pref's' to First Display 'Line', and the CLID 
  is withheld on an incoming call the line number only shows up after answering
  the call, instead of while the call is ringing.  
  Q01801594-03


Software Update BCM050.R300.ELEMENT-MANAGER-51 Description: 
----------------------------------------------

- Add a new checkup button "Force G.711 for 3.1k audio" to "SIP Media Parameters" panel
  The requirement was to add a new check button in Element Manager's 
  panel: Configurations -> Resources -> Telephony Resources -> 
  IP Trunks -> SIP Media Parameters. The default setting for this 
  button is 'off'. However, in order for BCM to support 3.1k audio
  (modem) calls over SIP trunks, this button must be set to 'on'.
  Q01844957
  Q01829899-01


Software Update BCM050.R300.FEPS-46 Description:
-----------------------------------

- No speech path on the calls from SRG50 to CS1000 MobileX over SIP trunks 
  SRG IP sets called CS1000 MobileX over SIP trunks, the calls were answered 
  by the cell phones of the twin sets, but no speech paths were established.
  The cause of the problem was that SRG mistakenly attached a duplicated SDP 
  with its PRACK messages in response to CS1000's 180 alerting messages.
  Q01834016

- Calls from BCM to SIPPBX over SIP trunks RNA and SIPPBX SIP trunks are not released
  BCM initiated SIP outbound calls to SIPPBX. The calls were ringing but 
  not answered (RNA). Three minutes later, the Radvision stack timer timed out, 
  the calls were released inside the BCM but no CANCEL messages were sent out 
  to notify the SIPPBX. Therefore, the SIP trunks of the SIPPBX were locked up.
  Q01813159

- Calls transferred from analog trunks to SIP trunks experience one-way speech 
  A call from a BCM analog trunk to a BCM analog set was forwarded to a CS1000 IP set, 
  then it was transferred to the second CS1000 IP set which experienced One-way speech path.
  The cause of the problem was that BCM initially selected codec G.729 for its outbound 
  calls to CS1000, however, BCM revoked its previous decision and selected G.711 when 
  CS1000 attempted to transfer the calls. Therefore, a codec mismatch occurred.
  Q01829899-01

- FEPS stops and restarts intermittently
  This problem occurred when a call was set up with G.729 from a 3.1k Audio port. 
  If a Re-INVITE was sent to the BCM on that port, then in trying to produce an answer
  to the OFFER, there was a logic error which caused the non-G.711 current codec to 
  be re-offered in a continuous loop. This locked up the gateway, and generally caused 
  a crash.
  Q01842956


Software Update BCM050.R300.UTPS-43 Description:
-----------------------------------

- The LCD on the KEM going blank intermittently
  The following latest firmware is being included in the BCM50 R3 build which 
  fixes the 1110 series expansion module's issues.
  0623C4L.bin - for 1110 Phone
  0624C4L.bin - for 1120 Phone
  0625C4L.bin - for 1140 Phone
  Q01848399

- Inclusion Of UNIStim 2.2 - 062AC5J for Orion Sets
  The latest Orion Set firmware 062AC5J is being included in the BCM50 R3 build.
  Q01848523

- IP sets disconnect from BCM system after using Hot desking
  This problem is seen when the user tries to do multilevel Hot desking. 
  The 'Hot desking' feature is designed in such a way that one can not have 
  multi-level Hot desking. Make sure there is no current Hot desking session 
  running before Hot desking any other set.
  If there is already a Hot desking session running and the user attempts to 
  hot desk one more set, user will be prompted to "Cancel current Hot desking".
  Q01809763

- IP Set still rings after using Hot desking.
  The fix provided is such that the "tone" state of the IPset is cleaned up  
  when the IPSet is involved in Hot desking.
  Q01809760


Software Update BCM050.R300.SRG-37 Description:
---------------------------------------

- CS2100 support by SRG50 R3
  The logic to support CS2100 call server by SRG50 R3 has been added.
  Q01820671


Software Update BCM050.R300.TIMEZONE-36 Description:
---------------------------------------

- Changes to Australian Daylight Saving April 2008
  Australian Eastern (New South Wales, Victoria, Australia Capital 
  Territory and Tasmania) and Central (South Australia) time zones 
  will extend daylight saving and also harmonise start and end times 
  commencing April 2008. From April 2008, daylight saving will end 
  on the first Sunday in April and recommence on the first Sunday in 
  October in all states.

  Argentina adopted DST on Dec 30, 2007. This update has DST ending 
  the third Sunday of March, and then beginning again the first 
  Sunday in October.
  Q01817208-03


Software Update BCM050.R300.SOFTWARE-MANAGEMENT-32 Description:
--------------------------------------------------

- Update Version comparisons failed
  A programming error caused some version comparisons 
  to fail, resulting in updates sometimes failing to apply.
  Q01819396


Software Update BCM050.R300.SRG-29 Description:
----------------------------------

- Orion Sets (1200 Series) Support in SRG50 R3
  The logic to support 1200 series sets in SRG mode
  has been added.
  Q01809821

- Orion Sets (1200 Series) Support in SRG50 R3
  Changes were made to enforce local mode feature
  filtering and key disabling as applicable to 1200
  sets in SRG mode.
  Q01809821-01


Software Update BCM050.R300.VOICEMAIL-27 Description:
-----------------------------------------

- Export option is missing if the CallPilot Manager is launched from Element Manager
  If CallPilot Manager is launched from Element
  Manager then no export option is presented to
  export the recorded company greetings, but if one
  launches CallPilot Manager from a browser (E.g.
  http://<IP_Address>/CallPilotManager) then the
  export option is presented. This update corrects
  the problem by passing the correct administrator
  user ID based on the system DN length while
  setting the security context.
  Q01805057

- Call Sender shows corrupted CLID for German profile 
  This update increases the Local Number Length
  from 7 digits to 15 digits for German profile so
  that CallPilot can correctly determine the
  dialable DN for Call Sender feature.
  Q01789495-02 


Software Update BCM050.R300.DSP-FIRMWARE-26 Description: 
-------------------------------------------

- This update fixes an error recovery mechanism used  during the connection phase 
  of the V.34 soft modem.
  This change allows the soft modem to connect more 
  reliably whenever the error recovery is required 
  due to issues with the line and/or the remote modem.
  Q01813858

- Call is answered but ring tone continues on analogue  GATI. 
  For an incoming call, even though the call is 
  answered, ring tone is heard on analogue GATI trunks. 
  This is a race condition which occurs intermittently. 
  This update corrects the issue by blocking the 
  detection of ringing once the call is answered for 
  that particular trunk.
  Q01796100-01

- Taiwan busy tone detection. 
  This update fixes an issue with busy tone detection 
  for GATI trunks. Without this update busy tone is 
  not detected by the GATI trunk.
  Q01777610

- Modem failure
  Modem failed to function after the application of 
  DSPFIRMWARE-7.
  Q01820346

- GASI Globalization:  Support for United Kingdom, 
  Australia and Poland has been added for Analog 
  Stations. Market-related parameters for all of the 
  supported profiles are downloaded from the Core 
  through the ASM+ messages.
  Q01780407


Software Update BCM050.R300.CDR-24 Description:
----------------------------------------------

- CDR CLID Fix
  CDR reports the CLID for incoming calls intermittently 
  due to active registration of CLID by the other 
  software or equipment. This update resolves the issue 
  of recording CLID intermittently by changing the CDR
  design to support both active and passive registration of CLID.  
  Q01738969-02


Software Update BCM050.R300.GAP-23 Description:
----------------------------------------------

- This update adds a privilege to the BCM called SetProgramming. 
  The SetProgramming privilege will have access to the following Element Manager Screens:
      Welcome 
      Current User 
      Active Sets: Line Access, Capabilities and 
                   Preferences, Restrictions
      Active Applications DN: Line Access, 
                   Capabilities and Preferences, 
                   Restrictions
      Inactive DNs: Line Access, Capabilities and 
                   Preferences, Restrictions
      All DNs: Line Access, Capabilities and 
                   Preferences, Restrictions
      Q01788687-03


Software Update BCM050.R300.FEPS-22 Description:
-----------------------------------------------

- Call transfer fails
  BCM SIP gateway would occasionally fail to process an 
  Attended REFER request correctly. The failure was 
  caused by incorrectly locating and tearing down the call 
  instance to be replaced.
  Q01771012

- BCM failed to send BYE to CS1000
  A SPS was configured to communicate through UDP with 
  BCM, while TCP with CS1000. Calls were made between 
  BCM and CS1000 via SPS. When a call was released from 
  a BCM set, BCM failed to send the SIP BYE message to 
  CS1000. This was a Radvision SIP stack bug, and the 
  fix was provided by Radvision tech support.
  Q01800465

- T.38 Fax calls across SIP trunks could cause trunks to be locked up
  T.38 Fax calls over SIP trunks could be established 
  successfully. But if the call release was initiated 
  by the far end, FEPS was not able to properly handle 
  the interaction with other components, which caused 
  the SIP trunk to be locked up. This was a timing issue. 
  Q01758242-03


Software Update BCM050.R300.CTE-18 Description:
----------------------------------------------

- CP_DISCONNECT msg missing in TAT scenario 
  During a TAT scenario, there was a missing CP_DISCONNECT 
  message for the device being monitored causing LAN 
  CTE applications to possibly lose track of the state of the call.
  Q01802630


Software Update BCM050.R300.SOFTWARE-MANAGEMENT-16 Description: 
-------------------------------------------------

- The transfer of software is optimized when "My  Computer" retrieval option is 
  used from Element Manager. 
  Only the necessary software packages in
  the update will be downloaded to the BCM instead
  of all the software packages.
  Q01791291-02


Software Update BCM050.R300.APPP-14 Description:
-----------------------------------------------

- Advanced Paging Productivity Pack (APPP)
  The APPP provides the following four capabilities

  One Button Page - an extension of the existing one button park and page.
  This feature will perform a page when a pre-programmed feature key is 
  pressed even if no active call is present at the set. An example would be 
  "Cashier in Aisle 1 needs change").

  One Button Text Message  - Allows a text message to be sent 
  (and acknowledged) to a fixed or wireless (Dect or Spectralink) phone. 
  An example would be "Angry customer at Aisle 1"). 

  Customer Assistance Box - This feature allows a retail end customer to 
  walk up to a customer assistance device in a store and press a large 
  "Please help" button. The system will then perform a periodic page 
  such as "Customer in electronics requires help".  When a sales assistant 
  arrives he/she presses a different button to cancel any further pages. 
  The assistance request and the required time to answer the page is 
  recorded in a CSV file for later reporting by a custom CDR application.

  Scheduled Paging - system will provide a scheduled specific page 
  (e.g. "the store is about to close").


Software Update BCM050.R300.VOICEMAIL-13 Description:
-------------------------------------------------

- VoiceMail IP set text prompts missing soft key labels. 
  There were localized text prompts in VoiceMail and 
  MeetMe Conferencing where IP set softkey labels 
  were missing. English text prompts were not affected.
  Q01792794

- RCC 2.5 cannotconnecttoDB and invalid XML.
  CallCenter received a line ID as DN number from
  the middleware. This causes the XML validation
  against the schema to fail, since the DN is
  defined as numerical in the schema, whereas the
  line ID is alphanumeric. Now this will be
  detected and a numerical value will be assigned
  to the DN.
  Q01786289


Software Update BCM050.R300.PSM-12 Description:
----------------------------------------------

- Address "Low Memory Alarms", alarm 11202. 
  The purpose of this update is to reduce the low 
  memory threshold in order to prevent unwarranted 
  memory alarms during normal system operation.
  Q01752490.


Software Update BCM050.R300.CORE-TELEPHONY-PROVIDER-9 Description:
-------------------------------------------------

- GASI globalization. 
  Support for United Kingdom, Australia and Poland, has been added for GASI.
  Required Element Manager changes are addressed in this update.
  Q01591658-02


Software Update BCM050.R300.CORE-8 Description:
----------------------------------------------

- GASI globalization. 
   Support for United Kingdom, Australia and Poland has been added for Analog
  Stations. Market-related parameters for all the supported profiles are downloaded 
  from the CoreTel through the ASM_PLUS_INIT stimulus messages.
  Q01591658-02

- Adaptive Line Tuning Support for GATM-Ver2.
  Adaptive Line Tuning support is added in
  GATM-Ver2 firmware. This is to resolve the echo
  issues reported in multiple sites in different
  markets. This new Line Tuning Algorithm
  calculates the Filter Hybrid coefficients
  dynamically during boot-up based on the CO line
  conditions. GATM Adaptive Line tuning will only
  be supported on GATMv2 hardware and later
  vintages of GATM and combinations modules, which
  include the following top level codes: Gx16 MBMs
  (NT5B42AAABE5/NT5B42AAACE5) &
  GATM 4/8 (NT5B44BAABE5/NT5BAAABE5).
  Q01755111-03


Software Update BCM050.R300.CTI-3 Description:
---------------------------------------------

- Core telephony crash. 
  If a F989 Silent Record-a-Call fails for any reason, core
  telephony may crash if a MeetMe conference is initiated 
  immediately after that failure.
  Q01783842


Software Update BCM050.R300.FEPS-2 Description:
----------------------------------------------

- T.38 fax parameters not acceptable by CISCO
  Call Servers FAX calls originated to CISCO Call
  Servers will fail because T.38 FAX parameters in
  Nortel T.38 SDP ANSWER are not compatible with
  the T.38 FAX parameters in the Call Server OFFER.
  Q01767675


This update includes the content of the following superseded Smart Updates:

BCM050.R300.SU.System-151.200901


