Software Update Name: BCM050.R300.UTPS-257

Applicable H/W Platforms: BCM50, BCM50a, BCM50e, BCM50b, BCM50ba, BCM50be

Applicable S/W Platforms: 6.00.2.05

Category: GEN

Installation Recommendations:
This update should be applied to all new installs of BCM 50 release 3.0 
systems. Existing installations should have this update applied
if the CR condition is noticed. There is no need to 
schedule specific maintenance to apply this upgrade if there 
are no reported issues. In those cases, systems should be 
updated at the next regular service opportunity. 


Components and Versions:

   utps 1.2.283.82.205

Dependencies: 
Required Updates:  
  - BCM050.R300.SU.System-259.201105 or later

Updates should be applied in the following order:
  - BCM050.R300.SU.System-259.201105 or later
  - BCM050.R300.UTPS-257

Product Dependencies: None

Size: 22.45 MB

System Impact: 
Time to apply approximately 2 minutes

Does update application force reboot: No

Other Impacts: None

Limitations: None

Update Removable: No

Description:
------------
The following issues are addressed:

1. The first few seconds of conversation is muted for calls to IP sets.
   When calling 12xx IP set, the called party speech is muted
   for the first 0.5-1.5 seconds due to delayed acknowledgement from
   12xx set to BCM for setting of speech path.

   Inclusion of UNIStim 5.1 solves this issue.
   0621C8D,0623C8D,0624C8D and 0625C8D for IP phones i2007, 1110, 1120e 
   and 1140e respectively. 062AC8D for Ip phones 1210, 1220 and 1230.
   wi00894450

This update includes the content of the following superseded updates:

BCM050.R300.UTPS-249
--------------------
1. Pairing between 1140E and the bluetooth headset device may occasionally
malfunction, although device status shows paired, calls cannot
be answered through headset.

Inclusion of UNIStim4.2 firmware for IP set solves the issue.
0623C7M, 0624C7M, 0625C7M for IP Phone 1110, 1120E and 1140E respectively.
062AC7M for 1210,1220 and 1230
Q02088099-01

BCM050.R300.UTPS-230
--------------------
1. Inclusion of UNIStim 3.4 firmware release for IP sets 
i2001/i2002/i2004 phase 2
Inclusion of UNIStim 4.1 firmware release for IP sets
1110/1120E/1140E/1210/1220/1230/2007
Q02124398


BCM050.R300.UTPS-221
--------------------
1. CICM sets (regardless of IP set type) are forced firmware upgrade from SRG 
when switched to local mode (e.g. WAN failure) and forced firmware 
downgrade from CS2K when switched to normal mode (e.g. WAN link restored).
Q02112423

BCM050.R300.UTPS-196
--------------------
1. i2007 volume fluctuating during calls when using headset 0621C4V . 
Issue is with Echo cancellation with in the firmware, as it should not lower 
volume but cut down background noise.

Inclusion of UNIStim3.3 firmware for IP set solves the issue.
0604DCL for Phase II IP Phones (2001, 2002 & 2004).
0621C6P for IP Phone 2007.
0623C6R, 0624C6R, 0625C6R for IP Phone 1110, 1120E and 1140E respectively.
062AC6R for 1210,1220 and 1230
Q01988838

2. DIR / BCM50 R3 N.A. SW 6.0.2.05.237 / EAP authentication on data ports on IP .
When device connects to the PC port of a 1230 IP set and authenticates via EAP, 
the authentication is successful. However, when the device is disconnected,
the authentication is not released and remains authenticated via the set.
The 1230 IP set must be rebooted to release the authentication.
If the customer tries to connect their device in another location such 
as a conference room, they are locked out of the network by the
lingering authentication on 1230 IP set.

Inclusion of UNIStim3.3 firmware for IP set solves the issue.
0604DCL for Phase II IP Phones (2001, 2002 & 2004).
0621C6P for IP Phone 2007.
0623C6R, 0624C6R, 0625C6R for IP Phone 1110, 1120E and 1140E respectively.
062AC6R for 1210,1220 and 1230
Q02049454 

BCM050.R300.UTPS-178 
-------------------
1. Inclusion of the UNIStim Firmware Release 3.2 for IP Phones:
0604DCJ for Phase II IP Phones (2001, 2002 & 2004).
0621C6M for IP Phone 2007.
0623C6O, 0624C6O, 0625C6O for IP Phone 1110, 1120E and 1140E respectively.
062AC6O for IP Phone 1210, 1220, and 1230.
Q02006915

2. Intermittent one way audio and clipping in voice path using handset
Orion (12xx) phones may experience intermittent one way audio and clipping in
voice path using handset. Headset or handsfree operation appear unaffected.
Q01946866 

3. i2050 fails connecting to the server
i2050 phase 1 phones do not support the IT capability query, which was 
blocking its boot up process and as the result failing while trying to connect
to the server. This has been rectified by implementing a fix so If an IP Phone
does not reply back to the IT capability query in 5 seconds, then the IP Phone
is booted up without the AG2000 support for that phone. 
Q02012003



BCM050.R300.UTPS-165
----------------------

1. Application Gateway 2000 (AG 2000) Support for BCM
Support for AG2000 on BCM has been added to deliver practical, converged voice 
and data applications on Nortel IP phones that enable organizations to benefit 
fully from IP telephony.
Q01984771

2. The last "L" of the "NEWCALL" softkey is shifted to the next key
Support has been added so that all the softkey labels which are displayed
on 1110, 1120, 1140 IPSets are in lower case except for the first character.
Q01930775-04

BCM050.R300.UTPS-91
-------------------

1. No speech path after using Hot Desking
This problem is seen when the user tries to invoke/cancel HotDesking when the
IPSet involved in this scenario is in Call Alerting state. The fix for this 
issue is to disallow HotDesking when the IPSets are in 'Call Alerting' state.
Q01809601

BCM050.R300.UTPS-43
-------------------

1. The LCD on the KEM going blank intermittently
The following latest firmware is being included in the BCM50 R3 build which 
fixes the 1110 series expansion module's issues.
0623C4L.bin - for 1110 Phone
0624C4L.bin - for 1120 Phone
0625C4L.bin - for 1140 Phone
Q01848399

2. Inclusion Of UNIStim 2.2 - 062AC5J for Orion Sets
The latest Orion Set firmware 062AC5J is being included in the BCM50 R3 build.
Q01848523

3. IP sets disconnect from BCM system after using Hot desking
This problem is seen when the user tries to do multilevel Hot desking. 
The 'Hot desking' feature is designed in such a way that one can not have 
multi-level Hot desking. Make sure there is no current Hot desking session 
running before Hot desking any other set.
If there is already a Hot desking session running and the user attempts to 
hot desk one more set, user will be prompted to "Cancel current Hot desking".
Q01809763

4. IP Set still rings after using Hot desking.
The fix provided is such that the "tone" state of the IPset is cleaned up 
when the IPSet is involved in Hot desking.
Q01809760 
