Software Update Name: BCM050.R300.VOICEMAIL-171

Applicable H/W Platforms: BCM50, BCM50a, BCM50e, BCM50b, BCM50ba, BCM50be

Applicable S/W Platforms: 6.0.2.05

Category: GEN

Installation Recommendations: 
This update should be applied to all new installs of BCM50 R3. Existing
installations should have this update applied if they are experiencing any of 
the issues that are corrected. There is no need to schedule specific 
maintenance to apply this upgrade if there are no reported issues. In those
cases, systems should be updated at the next regular service opportunity.

Components and Versions:
 
   MMCC 30.01.273.32.127
   voicemail 43.2.275.32.127

Dependencies: 
Required Updates:  
   - BCM050.R300.MESSAGE-FORWARDING-123 or later
   OR
   - BCM050.R300.SU.System-151.200901 or later

   Updates should be applied in this order:
   - BCM050.R300.MESSAGE-FORWARDING-123 or BCM050.R300.SU.System-151.200901
   - BCM050.R300.VOICEMAIL-171

Product Dependencies: None

Size: 10.84MB

System Impact: 
   Time to apply approximately 3 minutes

Does update application force reboot: No

Other impacts: 
   Voicemail, CallCenter, MeetMe and all related services will be unavailable 
   during the update

Limitations: 

1. When a Unified Messaging group list message is created by attaching multiple bodies 
   including at least one fax body, the Message Forwarding emails contain only the first body.
   Workaround: Send a separate group list message for each fax body.
   Q01893742

2. Voicemail will receive Digital Networking(VPIM) messages from a Networking Site if the 
   Enable Network Receive setting is disabled. The Enable Network Receive setting is enabled 
   by default in the CallPilot Manager General Networking Properties page.
   Workaround: None.
   Q01896169

3. The LED of an IP set with OBT message display does not blink when paging is done
   When paging is done to an IP set which has an OBT message displayed on
   it, its LED does not blink. However, in the absence of the OBT message, the 
   same set's LED blinks, as is expected.
   Workaround: None.
   Q01778697

Update Removable: No


Description:
-----------
The following issue is addressed:

1. VPIM message fails to get delivered to VPIM mail boxes
   When a VPIM message is sent, the notification MWI is turned 'ON' on the target DN,
   but when the user checks the voice mail, gets a dead air message. User on 
   the originating side gets a voice mail indicating that the CC messages could not be 
   delivered due to a network issue. This issue is caused by structure having Junk
   data due to alignment requirements. This update resolves the issue by implementing 
   comparison of structures using conditional operators.
   Q01901863-03

2. VM server crashes under heavy traffic
   The Voice Mail becomes irresponsive under heavy traffic running multiple
   applications (e.g. Fax, CC, VM, MMC, etc.) for an extended period of time.
   The Voice Mail gets stuck waiting for a response from Voice CTI, it blocks all the 
   requests and queues the other components. This update resolves the issue.
   Q01911913-01


This update includes the content of the following superseded updates: 

BCM050.R300.VOICEMAIL-157
---------------------------

1. Call Sender shows corrupted CLID for Switzerland profile
   This update increases the Local Number Length from 7 digits to 15 digits for 
   Switzerland profile so that CallPilot can correctly determine the dialable
   DN for call Sender feature.
   Q01977679

BCM050.R300.VOICEMAIL-111
---------------------------

1. Expected wait time not working properly on ACD
   With the first incoming call answered by an agent, and when none of the
   agents are ready to receive the next incoming call, subsequent incoming
   calls should go to the queue and the caller should get the greetings in
   accordance with the respective estimated Expected Wait Time (EWT), but 
   for the second call, the EWT call timer is jumping to the last greeting of
   the EWT table instead of playing the correct sequence. This update will 
   resolve the issue.
   Q01911361

BCM050.R300.VOICEMAIL-100
---------------------------

1. Some Mailbox Manager prompts are displayed in English for German profile
   When using a German profile get mixed languages on some pages.
   This update changes these particular prompts to German language only.
   Q01902613

2. Mailbox Manager Message Forwarding help button links to English version
   Mailbox Manager Message Forwarding help button always links to the English
   version of the Message Forwarding help regardless of the language being
   used.
   Q01902958

3. Unified Messaging Send fax no longer working for delivery receipts
   The BCM does not send the fax when Unified Messaging Fax printing is used 
   and the user selects "Receive a confirmation of delivery" in the
   "Compose Fax" window. 
   Q01914908

4. Caller transferred to skillset via operator fails
   Under the following circumstances, when an operator transfers a caller to a
   skillset, it erroneously goes to the skillset mailbox.
   Details: A caller calls Skillset X, there are no agents and an overflow
   rule exists which transfers to Skillset X's mailbox. Once in the mailbox,
   the caller presses "0" to reach the operator. The Operator receives the
   call and transfers the Caller to skillset Y which has all agents busy.
   Instead of getting queued, the caller returns to Skillset X's mailbox where 
   they again press "0" to reach the operator. On the second attempt with the
   same circumstances, the call will successfully queue in Skillset Y. The
   above scenario has been resolved so that the transfer from operator into
   Skillset Y will succeed on the first attempt regardless of all agents being
   busy or available.
   Q01679216-02
 
5. Call Sender shows corrupted CLID for German profile
   The "CountryLocalNumberLength" value for Germany has been hard coded as 7,
   but the DN length for Germany can be more than the present length of 7. The
   Call Sender feature uses the "CountryLocalNumberLength" value when
   determining the number to be dialed. Since the "CountryLocalNumberLength"
   was 7 there was a problem in determining the correct Dialable DN for the
   Call Sender feature. The length has been increased to 15.
   Q01789495-02 

6. Voicemail crashes with event error codes 10002 and 10230
   Two agents are on two different calls. One of them transfers the call to
   the other agent. Now the agent who has two calls holds one of them,
   disconnects the other and invokes F906 (supervisor help), which leads to
   a voicemail crash. This update resolves the issue by checking for this
   particular scenario and display a message on the set.
   Q01848085-02

BCM050.R300.VOICEMAIL-77
------------------------

1. MailBoxManager issue for German Language
   MailBoxManager for German language showed English text 
   prompts instead of German prompts. This update will resolve the issue.
   Q01844967

2. Changes for APPP and Intelligent Contact Center (ICC) Keycode issue
   When the APPPack keycodes were enabled, some Contact Center functions
   did not work as designed. This update addresses this anomaly.
   Q01815622

3. APPP symbol kiosk URL allowed paging for null station name
   Symbol kiosk allowed paging even when the station name was made NULL in the
   URL. No check was being made for a NULL station name. A check is added for
   the first character of station name to be alphanumeric, which checks for
   NULL station name as well.
   Q01829664-03

4. Voice quality is deteriorating
   If the BCM had more than 800 mailboxes,  voice quality would deteriorate 
   while accessing the CallPilot Manager and All Mailbox activity report. 
   This update will resolve the problem.
   Q01691889-04

5. High CPU spike seen while generating mailbox report
   If the BCM had more than 800 mailboxes, CPU usage spiked to 100%,
   while generating All Mailbox activity report. This update will resolve
   the problem.
   Q01826914-02

6. High CPU spike if Auto Send / Receive was configured
   If a Desktop Messaging client was configured for Auto Send/Receive, and a 
   new fax or voice message was delivered to that client's mailbox, resulting
   in more than 500 messages in that mailbox, then CPU usage would spike 
   to 100%. This update will resolve the problem.
   Q01762747-02

7. Unable to service Doorphone call when Doorphone call is routed to VM
   When a doorphone call goes to voicemail, the doorphone hears greetings, 
   and is solicited to record a message or provide key input, neither of
   which are useable functions by doorphone. The acquire action of VM prevents
   the doorphone software from disconnecting in this situation. This update
   resolves the issue by disconnecting the call when a doorphone call goes to
   voicemail.
   Q01845653-02

8. Localization of the message "Please Wait" for OBP fails.
   For One Button Page feature, the "Please Wait" prompt would always appear
   in English, regardless of the system language settings. This update will 
   resolve the issue.
   Q01830142-03

9. Mis-routing of Calls in CallPilot using CCR and Call Center 
   Despite the user pressing the correct digits, Auto Attendant transfers 
   an external call to skillset different from the expected one.
   This update corrects the problem by resolving a timing issue.
   Q01826967-02

10. Unread Skillset Message appearing in RT (Real Time) after listening 
    to VM (VoiceMail)
    Contact Center was not updating the skillset message
    counter when the message had been read and expunged. This has been
    fixed by updating the message counter in Contact Center once voicemail
    sends the expunge request.
    Q01693848-03

11. Feature F970 should be registered only if an APPP keycode is applied. 
    When the APPP keycodes were not enabled, F970 was registered but
    did not work as designed. This update addresses this anomaly.
    Q01816244

12. An “Agent full" error was displayed when a configured Agent tried to login
    to BCM that had Contact Center related key-codes such as ICC, 
    ICC Skill-sets, ICC Agents, MMCC, ICC Reporting, without a VM seat 
    key-code installed. This condition prevented Agents from logging in to
    the BCM. Root cause for this condition was that the ICC Agents, MMCC
    key-codes got enabled only if a key-code with a lower feature code like a
    VM seat key-code was also applied. This update corrects the problem.
    Q01767731

13. This update implements CIM-XML provider capabilities to change CCR Nodes
    Recordings, Company Greetings and Greeting Table CCR Tree Numbers.
    Feature ID: 315891
    Q01852606

14. CallPilot Manager reports in the CDR folder
    This update makes all CallPilot Manager reports available in the CDR
    folder (/var/nn/CDRDataFiles). Those reports are generated on a nightly
    basis, around midnight.
    Feature ID: 315891
    Q01852606

15. Mailbox Restrictions for the Administrator and the General Delivery
    mailboxes
    This update implements the ability to enable or disable Mailbox
    Restrictions for the Administrator and the General Delivery mailboxes.
    Feature ID: 315891
    Q01852606

BCM050.R300.VOICEMAIL-27
------------------------

1. Export option is missing if the CallPilot Manager is launched from
   Element Manager
   If CallPilot Manager is launched from Element Manager then no export
   option is presented to export the recorded company greetings, but if one
   launches CallPilot Manager from a browser (Eg.http:///CallPilotManager)
   then the export option is presented. This update corrects the problem by
   passing the correct administrator user ID based on the system DN length
   while setting the security context.
   Q01805057

2. Call Sender shows corrupted CLID for Germanprofile 
   This update increases the Local Number Length from 7 digits to 15 digits
   for German profile so that CallPilot can correctly determine the dialable
   DN for Call Sender feature.
   Q01789495-02

BCM050.R300.VOICEMAIL-13
------------------------

1. VoiceMail IP set text prompts missing soft key labels
   There were localized text prompts in VoiceMail and MeetMe Conferencing
   where IP set softkey labels were missing. English text prompts were not
   affected.
   Q01792794

2. RCC 2.5 cannotconnecttoDB and invalid XML
   CallCenter received a line ID as DN number from the middleware. This causes
   the XML validation against the schema to fail, since the DN is defined as
   numerical in the schema, whereas the line ID is alphanumeric. Now this will
   be detected and a numerical value will be assigned to the DN.
   Q01786289


