Software Update Name: BCM050.R600.CORE-TELEPHONY-12

Applicable H/W Platforms: BCM50, BCM50a, BCM50e, BCM50b, BCM50ba, BCM50be,
SRG50

Applicable S/W Platforms: 10.0, SRG50 R6

Category: GEN

Installation Recommendations:
This update should be applied to all new installations of BCM50 Release 6.0
and SRG50 6.0.
Existing installations should have this update applied if they are
experiencing any of the issues that are corrected. There is no need to
schedule specific maintenance to apply this upgrade if there are no
reported issues. In those cases, systems should be updated at the next
regular service opportunity.

Components and Versions:

   core-telephony 6.1.1.07.30

Dependencies: BCM050.R600.SU-2
              BCM050.R600.IPTEL-7

Product Dependencies: None

Updates should be applied in the following order

  - BCM050.R600.SU-2
  - BCM050.R600.IPTEL-7
  - BCM050.R600.CORE-TELEPHONY-12

Size: 3.100 MB

System Impact:
Time to apply approximately 10 minutes

Does update application force reboot: Yes

Other Impacts: None

Limitations: None

Update Removable: No

Description:
-----------
The following issues are addressed.

1. 8x16 has 4 ports stuck in enabling
   After upgrade to BCM 6.0 the upper four ports of an 8 port 
   analog trunk card will not enable. This affects GATM 8,
   8x16, and ADID8 modules.
wi00728891

2. On hold calls drop when attempting to pick up.
   Tandem calls dropped after being placed on hold when 
   TAT feature is enabled
wi00728884

3. No ring back on tandem calls
   Incoming target line calls to a BCM 450 that tandem over
   point to point T1 trunk trunks to a BCM 50  ring twice 
   then disconnect if not picked up within the 2 rings.
   The calling party does not hear ringback tone.
wi00819848




This update includes the content of the following superseded updates:

BCM050.R600.CORE-TELEPHONY-8
----------------------------

1. IP set display is inconsistent across IP set models	
   The key description for IP sets is inconsistent across different IP set models. 
   For example the description for an intercom key on an 1120 set says "IC" + the set DN
   wile on an 1140 the description says "Intercom" 
   BCMRELEASE-1074

2. SIP calls to PSTN through BCM fail if longer than 10 seconds
   wi00729169

3. MWI, tone OR lamp, for analog phones on ATA2 not working.
   Q02079632-02, wi00728926


