Software Update Name: BCM050.R600.CORE-TELEPHONY-128

Applicable H/W Platforms: BCM50, BCM50a, BCM50e, BCM50b, BCM50ba, BCM50be

Applicable S/W Platforms: 10.0

Category: GEN

Installation Recommendations:
This update should be applied to all new installations of BCM50 Release 6.0
and SRG50 6.0.
Existing installations should have this update applied if they are
experiencing any of the issues that are corrected. There is no need to
schedule specific maintenance to apply this upgrade if there are no
reported issues. In those cases, systems should be updated at the next
regular service opportunity.

Components and Versions:
 
   core-telephony 6.1.1.28.48
   
Dependencies:
	Required Updates:
	- BCM050.R600.SU.System-019.201312 or later

Product Dependencies: None

Updates should be applied in the following order:
	- BCM050.R600.SU.System-019.201312 or later
	- BCM050.R600.CORE-TELEPHONY-128

Size: 3.101 MB

System Impact:

Time to apply approximately 10 minutes

Does update application force reboot: Yes

Other Impacts: None

Limitations: None

Update Removable: No

Description:
------------

1.Coretel crash occurs when there is a VOIP fallback call with outgoing dial 
digit length exceeding 24digits. It causes all the IP sets to reboot and alarm 
logs show: 52004 **ERROR** FUMP channel not ready; MPS service aborted.
This update resolves the issue.
wi01153137

This update includes the content of the following superseded updates:

BCM050.R600.CORE-TELEPHONY-124
==============================

1.BCM digital user is not able to hear the announcement from CISCO service 
provider, when the PSTN subscriber is not available. 
This update resolves this issue.
wi01133072

BCM050.R600.CORE-TELEPHONY-122
==============================

1.IP 1210 with headset causes intermittent phone lockup. 
Users cannot transfer, cannot get dialtone.
This update resolves the issue.
wi01128130

BCM050.R600.CORE-TELEPHONY-118
==============================

1.Unable to configure Internal Autodial feature using the Element Manager
on a KEM/KIM. This update resolves the issue.
wi01113497


BCM050.R600.CORE-TELEPHONY-112
==============================

1.Tandem calls drop after 15 seconds when **OPTION is active.
Tandem call gets dropped when the toll fraud monitor feature is turned ON
on the tandem node irrespective of the restrictions getting passed.
This update resolves the issue.
wi01069915


BCM050.R600.CORE-TELEPHONY-106
==============================

1.BCM does not inform CS1K of network out of order on tandem outgoing calls.
CS1K cannot execute fallback via an alternate route since CS1K is not
informed that either resources are unavailable or the PRI is out of service. 
This update corrects the issue.
wi01056893

2. Tandem calls fail to fallback on SRG.
Tandem calls from PRI to SIP trunks fail to fallback to the Prime Set
as configured on the system. This update corrects the issue.
wi01066073

BCM050.R600.CORE-TELEPHONY-96
==============================

1.No OLI from BCM50 to BCM450 Trunks.
BCM 50 R6 connected to BCM450 R6 using either H323 or Sip trunks in direct
mode does not send OLI from BCM 50 out over the PRI lines connected to the
BCM450 R6
wi01013669

BCM050.R600.CORE-TELEPHONY-84
==============================

1.SIP Trunks get locked up
When incoming SIP call contains the digits that match the destination/called
systems destination codes and there is no Remote Access Package allowing the
tandem call, the SIP trunks get locked up. This update resolves the issue.
wi01022176

BCM050.R600.CORE-TELEPHONY-76
==============================

1.AA answers in half the ring cycles configured for Sweden market profile.
In Sweden market profile,the Autoattendant is configured to answer incoming
calls after 12 rings. However,the call gets answered by the AA after 6 rings.
This update resolves the issue.
wi01002772


BCM050.R600.CORE-TELEPHONY-74
==============================

1.Call forward to Broadcast Hunt Group does not work.
When an analog incoming call on a set gets forwarded to broadcast 
HG where all the members of the HG also have the appearance of the incoming 
analog trunk, then call is not presented to the HG members.
This update resolves the issue.
wi00990603

2.Failure in SIP call when 3rd party sip server is used
Intermittent call failure is observed between a third party CC Server(Voxtron)
and BCM.In bad call scenario call stays established without a speech path. 
voicestream goes only from Voxtron to client.voicestream from client to 
Voxtron is missing.This update corrects the issue.
wi01003207

3.Background Music not working on i200x p2
Background music does not play on IP sets intermittently when F86 (background
music feature)is turned on.This update resolves the issue.
wi00856010


BCM050.R600.CORE-TELEPHONY-64
===============================

1.FMFM functionality fails on analog trunks
Find me Follow Me(FMFM) feature fails on analog trunks after applying
BCM450 R600.core-telephony-44. When the analog phone answers the
call, the extenal caller gets dead air.This update corrects the issue.
wi00954113

2.Crosstalk on IP sets when outgoing calls are made over PRI trunk.
Crosstalk is heard on the IP set when an autodial key, configured with 
the destination code is pressed to make an outgoing call on the PRI
trunk. This update corrects the issue.
wi00960056

3.Coretel crash due to invalid TN (logevent 115)
This update corrects the referencing of NULL message pointer which results
in a crash of the core telephony component.This update corrects the issue.
wi00961755

4.Feature icons may not be retained in KEM/set keys.
Feature icons will not retain in KEM keys or set keys, when any key is 
programed or reprogramed. This update resolves the issue.
wi00945990

5.Intermittently one-way speech with Meet-Me conference
Intermittently a one way speech path may occur when setting up a 3 party
conference CALL. If a conference member mutes himself and then disconnects
from the conference, speech resources are not properly cleaned up. If
members of a subsequent 3 party conference use this improperly released
resource they may experience one way speech path.
When a meet-me conference mutes himself and then goes into hold, now all
the participants in the conference drop the call, the held participant
will be released by the conference Server. The conference resource used
by him remains in MUTE state. So for the next conference in the system
whichever participant is allocated with this MUTED.
This update corrects these issues.
wi00961314


BCM050.R600.CORE-TELEPHONY-51
===============================

1. Auto Attendant plays incorrect greeting.
Incoming calls on T1 E&M auto answer trunks hear the generic
greeting "enter the mailbox number or press # for company 
directory" when answered by the auto attendant.This update 
corrects the issue.
wi00926630

2. Intercom keys get stuck.
Set displays "No free buttons" while going off hook or trying to
seize the line after a TAT scenario. No calls can be made or 
received from the problematic set. This update corrects the issue.
wi00907906


BCM050.R600.CORE-TELEPHONY-44
==============================

1. Intercom key shows in use when there is no current call activity. 
The intercom key will light up, as if on an active call, even
though the call in question is no longer active. This update
resolves reports of this issue.
wi00895197

2. CLID is not always displayed on sets.
Incoming central office PRI calls that tandem from one BCM over
SIP trunks to another BCM may intermittently display CLID on the
destination set. This update resolves reports of this issue.
wi00861084

3. BLF (Busy Lamp Field) indication on KEM's (Key Indicator Module) 
does not update after a set performs a Page. 
When a DN that has a BLF appearance on other sets performs a page,
the BLF appearance on the other sets will show busy. When the DN
releases the Page, the BLF appearance will still show in use. If
the DN that announced the Page, changes status (goes off-hook then
back on-hook) the BLF condition is reset. This update resolves
the issue of the BLF appearance showing busy after the DN
completes the Page.
wi00897403

4. Last number redial sends partial digits on analog trunks
When the Last number redial feature is invoked not all digits are dialed.
wi00890435


BCM050.R600.COMBO-33
====================

1. PRI Lines cannot be assigned to BlocA
On a newly setup BCM50 6.0 move VoIP Trunks from BlocA to any other Bloc.
Attempt to move PRI Lines to BlocA. The only available options are BlocB
through F.
wi00830849

2. Analog trunk lockup for UK market profile
An enhancement which allows the end user to set the disconnect supervision 
detection time for the UK market. The lockups were occurring because the 
PSTN was sending a disconnect event that was too short to be detected.
wi00728913

3. KEMs reboot when moving lines using Feature *81
On sets with 3 or more KEMS connected using Feature *81 to perform multiple
line moves can cause all KEM modules on the phone to reboot forcing 
previously moved lines back to their original location.
wi00817292

4. Cannot select facility for External Autodial in EM
When programming an autodial using Element Manager one
is not prompted to enter what facility should be used
(Routing Table, Prime Line, Line Pool). 
wi00728895

5. When TAT call is answered held call is dropped.
A call from BCM1 to BCM3 (tandemed through BCM2) is rerouted back to 
BCM2. TAT happens between BCM2 & BCM3 and the corresponding trunks 
are released. Now, when the call is put on hold (Hold_normal), the
trunk (from BCM2 to BCM1) releases the call. 
wi00881330

6. Unable to leave VM when Telephony Audio Collection Service is activated.
When the Telephony Audio Collection Service (TACS) feature is invoked on a
set and we try to invoke any Voice mail on the same set, the voice mails
sent to the called set do not get delivered. 
wi00869535

7. Sets can only answer 1 call at a time even if multiple intercom keys are
configrued.
A Set is configured with Multiple Intercom keys. The first call lands on
the set through a TANDEM scenario involving TAT. When a second new call
comes in, instead of appearing on the next available intercom key, the
call appears/blinks on the same intercom key where the first call is
present.When we try to answer the second new call by pressing the
blinking key the second call doesn'tget answered. This only affects
incoming calls.
wi00873407

8. Element Manager hangs when changing T1 line type.
When chainging T1 trunk types for Inactive T1 channels Element manager can
hang for 5 minutes before the operation compoets. Only one line can be 
changed at a time. One He must reboot the BCM in order to configure the
next line.
wi00862425

9. Analog Set will ring continuously (FNA) or provide dead air (FB).
A Call comes into an analog trunk of the SRG50 5.0. The trunk rings on 
a Normal Mode set registered to the CS1K's Signalling Server. The Normal
Mode set is configured to forward calls to analog set on the SRG50. The
Analog Set is configured to Forward No Answer or Forward Busy calls to
the CS1K's CallPilot. The signalling protocol used on the IP Trunks is SIP.
When the Analog Set is busy the caller receives dead air. When the call 
is forwarding with no answer the set continues to ring continuously.
wi00854371

10. Intermittent incoming call drops when ringing Call center agent at BCM.
Intermittent incoming PRI calls to Call centre agents are dropped when
answered. 
wi00882451


BCM050.R600.COMBO-23
--------------------

1. BCM50 R6 clicking on Dect hand sets fix.
On a BRI cNIC card there was an issue with clock selection due to which
the clicking sound was heard on the Dect set. This update resolves the
issue.
wi00862265


BCM050.R600.CORE-TELEPHONY-12
-----------------------------

1. 8x16 has 4 ports stuck in enabling
After upgrade to BCM 6.0 the upper four ports of an 8 port 
analog trunk card will not enable. This affects GATM 8,
8x16, and ADID8 modules.
wi00728891

2. On hold calls drop when attempting to pick up.
Tandem calls dropped after being placed on hold when 
TAT feature is enabled
wi00728884

3. No ring back on tandem calls
Incoming target line calls to a BCM 450 that tandem over
point to point T1 trunk trunks to a BCM 50 ring twice 
then disconnect if not picked up within the 2 rings.
The calling party does not hear ringback tone.
wi00819848


BCM050.R600.CORE-TELEPHONY-8
----------------------------

1. IP set display is inconsistent across IP set models 
The key description for IP sets is inconsistent across different IP set
models. For example the description for an intercom key on an 1120 set says
"IC" + the set DN wile on an 1140 the description says "Intercom".
BCMRELEASE-1074

2. SIP calls to PSTN through BCM fail if longer than 10 seconds
wi00729169

3. MWI, tone OR lamp, for analog phones on ATA2 not working.
Q02079632-02, wi00728926
