Software Update Name: BCM050.R600.IPTEL-129

Applicable H/W Platforms: BCM50, BCM50a, BCM50e, BCM50b, BCM50ba, BCM50be, SRG50

Applicable S/W Platforms: 10.0, SRG50 R6

Category: GEN

Installation Recommendations:
This update should be applied to all installations of BCM50 Release 6.0 and 
SRG50 6.0.Existing installations should have this update applied if they are 
experiencing any of the issues that are corrected. There is no need to schedule 
specific maintenance to apply this upgrade if there are no reported issues. In 
those cases, systems should be updated at the next regular service opportunity.
After patch is applied, use Application launcher to install new version of 
Business Element Manager.

Components and Versions:

   feps 6.1.57.278
   iptel-mrs 6.1.36.284
   mgs 6.1.36.284
   mps 6.1.36.284

Dependencies: 
Required Updates: 
	- BCM050.R600.SU.System-019.201312 or later

Updates should be applied in the following order:
	- BCM050.R600.SU.System-019.201312 or later
	- BCM050.R600.IPTEL-129

Product Dependencies: None

Size: 4.42 MB

System Impact: 
Time to apply approximately 10 minutes

Does update application force reboot: Yes

Other Impacts: None

Limitations: If not enough ports are configured user may experince following
1) When calling a remote set, system will show busy.
2) If trying to call out from the remote set, set displays "Try Later".
To recover this, user needs to increase the "RTP over UDP" port range.
Mrs and Mgs needs to be stopped and started manually after changing 
"RTP over UDP" port range in EM. Steps to make the changes are,
1) Change "RTP over UDP" port range to desired value.
2) Stop mrs and mgs from Element Manager.
3) Start mrs and mgs from Element Manager.
This steps are to be done within a maintenance window.


Update Removable: No

Description:
------------
The following issues are addressed:

1.Incoming Analog trunk call to BCM transferred to Call Pilot on CS1K over SIP
trunks Fails due to wrong media attributes updation in offer update message.
This updates resolves this issue by handling the BCM's internal media streams
state.
wi01160417

This update includes the content of the following superseded updates:

BCM050.R600.IPTEL-108
---------------------
1.No speech path on CFNA which redirects from SRG to CS1K CP via SIP.
External calls coming into SRG IP set via PRI are forwarded to CS1K voicemail
(Callpilot)over SIP. When Voicemail answers ,neither is the user able to record 
the message nor,the DTMF digit (5 = shortcut) is recognised to go to the record
while the greeting is playing. This updates resolves this issue by handling the
BCM's internal streams media for a specific event.
wi01052802

BCM050.R600.IPTEL-107
---------------------
1. Set in normal mode (registerd to CS1K) makes an outgoing call via BCM
to the PSTN (BCM is tandem node). BCM does not inform CS1K of network out
of order on tandem outgoing calls. CS1K was not able to do fallback on
alternate route. This update resolves the issue.
wi01066968


BCM050.R600.IPTEL-105
---------------------
1.When BCM sends 480 to drop the a SIP trunk call message does not contain
Reason header. This update resolve the issue by adding reason header field for 
following 3 SIP responses.
404 Not found.
480 Temporarily unavailable.
503 Service unavailable.
wi01048437

2. User cannot enter more than 16 characters in STUN Server Address field in 
Element Manager.This update resolves the issue by changing the STUN Server
Address field length to 32 characters.
wi01063802

3. Tandem Fax through SRG to CS1K CallPilot fails intermittently. The root cause
is due to the change is message sequence after upgrade,BCM opens a RTP stream
with ip address 0.0.0.0.This update resolve the issue by changing BCM behavior
so hat it opens RTP socket only after receiving proper transport info.
wi01046443

4. BCM calls Auto Attendant and on auto Attendant prompt, dials the number to
transfer the call to CM station. When the call is transferred to a CM station 
there is no speech path between BCM and CM station.
This update resolves the issue.
wi01033678

5.if the BCM receives an event 415 during the setup of the call, then BCM gets
stuck in a loop of invites that can only be cleared by restarting feps.
This update resolves this issue by clearing a flag set by BCM for 
sending re-INVITES.
wi01060571 


BCM050.R600-IPTEL-90
--------------------
1. An incoming call is answered by Auto-Attendant on the BCM450, which transfers 
the call to the BCM50's set via SIP. The set has CFNA configured to BCM450's 
centralized Voicemail. There was no voice path between the originating set and
the centralized voicemail. This update resolves this issue.
wi01035836

2. Outgoing call to mobile phone doesn't have speech patch when connecting to the 
mobile mailbox for some of the subscribers.During error conditions the MCDN queue 
was not getting refreshed. This update resolves this issue.
wi01036508 

BCM050.R600.IPTEL-86
--------------------
1. BCM continues to send re-INVITE to far-end after call termination 
once it received 415 response to a mid call request.
This update resolves this issue. 
wi01016963,wi01009950

BCM50.R600-IPTEL-77
--------------------
1.Sigma sets registered to CS1K experience no voice path when call sender feature
is used due to a glare situation.
This update resolves the issue.
wi00963891

2.H323 Calls that are redirected back to the Centralized voice Mail on the CS1000
are getting no speech path at times.
This update resolves the issue.
wi01011038

3.CS1K sets can't transfer BCM calls to another CS1K set, as BCM was not handling
codec switch from G.729 to G.711 during transfer of H323 calls.
This update resolves the issue.
wi01017130

BCM050.R600.IPTEL-72
--------------------

1.SIP call from BCM50 to B5800 Sigma (Distributed) that is blind 
transferred to CS1K UNIStim gets dropped when CS1K UNIStim phone 
answers the call.
This update resolves this issue.
wi00958976

2.There is no voice path on SIP call originating from BCM to B5800 
which is forwarded to CS1K because BCM is not able to send a re-INVITE 
with proper IP address in SDP.
This update resolves this issue.
wi00977946


BCM050.R600.IPTEL-67
------------------------

1.Local call on BCM50R6 when blind transfered to B5800
over SIP results in one way speech path.
This update resolves this issue.
wi00966201 

2.Call between BCM and Meeting Exchange over SIP fails, when 
originating BCM supports MCDN over SIP.
This update resolves the issue.
wi00853708

BCM050.R600.IPTEL-63
------------------------
1.Call coming into PRI on SRG and in normal mode, are CFAC to set in Normal 
Mode. Set on the CS1000 then has a CFNA set for 3 rings to Voicemail. 
At times, the call forwards to mail but has one way speech path.
This update resolves this issue.
wi00950886 


BCM050.R600.IPTEL-57
------------------------
1.In Multi Clustering environment, BCM user from remote location cannot join the
conference after pressing Participant Code.When the user dials the Meetme 
access number and the Participant Code ,the user cannot join the conference.
This update resolves the issue.
wi00925652 

2.Remote worker sets uses the 30K "RTP over UDP" port range for audio and this
port range can be reconfigured from EM.When user reduces the port range, Remote
worker sets will have no audio.
This update resolves the issue.
wi00903985

3.There is an unexpected event logging in the feps logs, even though there a
are no data modifications in the EM.
This update resolves the issue.
wi00931000 

4.BCM keep playing MoH for sets where CFAC activated to CS1K call pilot.
This update resolves the issue.
wi00942885


BCM050.R600.IPTEL-46
------------------------
1.One way speech path is observed when an active call on an IP set is 
blind transferred to the far-end BCM over SIP.
wi00889555


BCM050.R600.IPTEL-37
----------------------
1.IP trunks lock up during improper disconnect sequence.If, during a call
disconnect the far end closes the TCP / IP socket before the BCM can respond,
The H.323 trunks may locked up requiring feps to be restarted to recover.
The issue is observed only when BCM 6.0 is working in tandem with CS1K 6.0.
wi00861540,wi00877628,wi00881033

2.Fax failures on tandem calls to SRG 7 or 10 digits incoming fax calls
from PSTN to CS1K, tandeming to SRG fail most of the time. Fax machine
rings but it does not transmit.
wi00867164

3.One way speech path when call transferred or placed on hold.
When a user transfers or unholds a call BCM was not sending authorization
information along with Re-INVITE. This results in no speech path.
wi00877314

4.Cannot make calls out of system after applying BCM450 R6.0 IPTEL-19.
Route information is not formed properly in the INVITE message.
The data structure used to copy the Route information was not proper.
wi00880016

5.Incoming call blind transferred to PSTN has no speech path
wi00890769,wi00890904,wi00890905

6.False alarm raised due to a wrong alarm id mapping.Once the TACS service
starts, a wrong alarm is sent to Element Manager and causes wrong indication
of the service. 
wi00832739

7.BCM SIP Fallback to PSTN too slow on WAN failure
When the WAN connection is down, every attempted SIP call takes ten 
seconds to fail over. 
Wi00729213

8.Due to the fix delivered in FEPS for wi00880016 , IpTelProviderAgent 
compilation was failing. This update resolves the issue. 
wi00897218 

BCM050.R600.IPTEL-19
-----------------------

1. Alarm 10005 keeps occurring every 4 minutes if the keycode for IP Trunks
(includes SIP trunk also) is not applied.
wi00829683

2. PSTN calls to SRG along BRI trunk is answered by a set in Normal mode.
When the call is transferred to another set in Normal mode, there is only
one-way speech path.
wi00728988

BCM050.R600.IPTEL-13
--------------------

1. CS1K SIPline calls to BCM UNIStim phone. The call is then blind transferred
to a BCM TDM phone. There is no voice path and the status on SIPLine phone is
Remote On-hold
wi00841043

2. Some SIP call servers and service providers do not correctly handle the
maddr parameter in the Request-URI. The presence of this parameter can cause
calls to fail. With this fix, the maddr in R-URI parameter can be disabled
to facilitate successful call completion to affected servers and/or service
providers.
BCMRELEASE-1097 

BCM050.R600.IPTEL-11
--------------------

1. Outbound SIP trunk does not respond to UPDATE when inbound trunk has not yet 
negotiated SDP via 100rel 
wi00733826

BCM050.R600.IPTEL-7
-------------------

1. SIP Standard Caps Exchange broken in some tandem calls.
wi00729216

2. BCM sending SIP INVITE request to the IP address different than the one with 
which it got registered successfully.
wi00828944

3. BCM fails to acknowledge the SIP Response if an outgoing call to SIP-T 
customer is not answered and far end tries to clear the call with a 480
response.
WI00825476

4. BCM should not treat SDP version as old when session id has changed
wi00732195

5. Ringback tone is not heard for the majority of the calls when dialling out 
via BT's Public SIP trunks and breaking out to PSTN.
wi00822623

6. BCM ignores the port information of the Contact-URI and sends INVITE to the
wrong port after receiving 302 response. 
BCMRELEASE-1078

7. Calls from Skype clients produce non-numeric CLID. FEPS does not handle 
non-numeric CLID very well and encodes the non-digit characters as digits 
into VDI message and passes to CoreTel.
BCMRELEASE-1089

8. BCM-sip-SM-CS1K-cfac-SM-OneX - 1 way speech from OneX to BCM 
wi00774905

9. CS1K_1_IPSet calls SIP to BCM_2050 blind transfers to SM_client with no 
speech path
wi00819523

10. Outbound SIP trunk does not respond to UPDATE when inbound trunk has not 
yet negotiated SDP via 100rel
wi00733826

11. Call resumed with no media if transferred party doesn't answer call
wi00829858
