The following steps outline the procedure to upgrade the CPPM BIOS to Version 18 for all applications.

1.	Using a bootable Signaling Server or Call Server RMD (490.07 or greater)
2.	Create a directory titled bios in the RMD root directory
3.	Place LMDU74AA_0018.ROM file in bios directory on your RMD
4.	Connect to Serial Port 0 of CPPM
5.	Put RMD in faceplate compact flash location, reset CP-PM and select faceplate boot option 
6.	At the Main Menu, select option: <t> - To go to the Tools Menu
7.	From the Tools Menu, select option: <t> - To replace CPU board BIOS
8.	Confirm file name and bios upgrade, the flash will then erase/reprogram and return to the tools menu

		Caution:  Do not interrupt the flash upgrade process.  

9.	Press RST button
10.	Press ctrl-c during the memory test to enter the System BIOS Setup menu.
11.	Select Reset CMOS to Factory Defaults
12.	Select 'y' to confirm your choice.
13.	The card will reboot and the upgrade is now complete.  

The BIOS Version will be updated to NTDU74AA 18

Changes included in Version 18:
1. CPPM BIOS version information now embedded in SMBios information

Changes included in Version 17:
1. Support for SMBios included

Changes included in Version 16:
1. CP-PM can now support Linux
2. BIOS will properly reset compact flash FMD and RMD on startup.

Changes included in Version 15:
1. Pressing F to force the card to boot off the faceplate drive will immediately cause the card to attempt to boot instead of delaying until all
 '.' have printed.

Changes included in Version 14:
1. CMOS configuration option to configure slot of CP-PM removed to avoid confusion.

Changes included in Version 13:
1. Screen corruption during BIOS display cleaned up.
2. Manufacturing tests completed and included in FBUG.
3. Support for rev. M Simpletech compact flash cards included.
