Controlling unicast connections to a publishing point
The options for controlling client connections depend on the type of publishing point you use. You can find tools to control client connections to your publishing point on the Monitor, Source, and Properties tabs.
On-demand publishing points
To control client connections to on-demand publishing points, use the following buttons on the Monitor tab:
- Deny. Prevents new connections to the publishing point, but does not disconnect currently connected clients. As connected clients stop receiving the stream and disconnect from the server, the number of connections gradually decreases.
- Allow. Enables the publishing point to begin accepting new unicast connections.
- Disconnect all. Immediately disconnects all currently connected clients. (To prevent new connections, you should also deny new connections.)
Broadcast publishing points
To enable clients to receive content from a broadcast publishing point, use one of the following options:
- Enable the automatic start feature. For publishing points that are delivering content as a unicast stream, this feature is controlled by the Start streaming when first client connects property that is enabled by default in the General category on the Properties tab. When you use the automatic start feature, a broadcast publishing point does not start until the first client connects. This feature is useful when you are sourcing from an encoder or distribution server and want to minimize bandwidth usage. If only one client is connected to the publishing point and that client disconnects, the server closes the connection with the encoding computer and stops streaming the content after 30 seconds, thus saving bandwidth. If another client connects, the server automatically reconnects to the encoding computer and resumes streaming the content.
- Start the publishing point. When you start a broadcast publishing point manually (for example, by clicking the Start button), the content begins streaming regardless of whether any clients are connected. A client connecting to the broadcast publishing point begins playing the broadcast stream in progress. You can also stop a broadcast publishing point. If you do so, all clients stop receiving the stream
After a broadcast publishing point is started, you can enable the Deny new unicast connections option, which prevents new unicast connections to the publishing point. This option does not disconnect currently connected clients. As connected clients stop receiving the stream, the number of connections gradually decreases. If you want to disconnect all clients immediately, you can select the Disconnect all clients command. If you have denied connections to your publishing point and want to begin granting client access, you can choose the Allow new unicast connections option.
You can control client connections by configuring limits in publishing point properties. For example, you can limit the number of client connections and bandwidth usage. For more information, see Setting publishing point limits.
Notes
- If you are delivering content both as a unicast stream and a multicast stream, denying new connections only affects clients receiving the content as a unicast stream.
- Stopping the broadcast publishing point also stops a multicast transmission.
- If you are delivering content as a multicast stream you cannot use the automatic start property because multicast clients do not connect directly to the server. You can choose to automatically start the publishing point after completion of the Multicast Announcement Wizard. Otherwise, you must manually start the publishing point.
- Manually starting a broadcast publishing point overrides the Start publishing point when first client connects property. If you want the broadcast publishing point to start and stop automatically based on client connections, do not start the publishing point manually.
Related topics
© 2000-2003 Microsoft Corporation. All rights reserved.