This package contains:
======================

1. PEP Number: CP202S03G22S


2. Problem Description:
=======================
Q00996757:
A potential problem has been identified within the Notification Service, 
that if experienced results in 100% CPU Utilization which may cause 
call processing issues such as slow call answering requiring additional 
system maintenance to be performed.  This issue usually occurs during 
the Version Manager Audit.

CallPilot uses a Version Manager to track the current and obsolete 
versions of the applications that are currently being used on the 
server. The applications that are tracked by the Version Manager 
are both Appbuilder and imbedded applications ("Voice Item Maintenance", 
"Voice Messaging", etc). An issue was identified within the Version 
Manager Data table. The issue is related to the current and obsolete 
versions for an application are the same in the data table. This 
condition results in an infinite loop during Version Manager Audit. 

Q00982422:
CallPilot uses a database population process which occurs automatically 
during the initial configuration phase after completing an upgrade.  
If Service Update 3 (SU03) is installed immediately after completing 
the upgrade to CP2.02 but prior to being booted into full service 
and accepting calls, the database is not properly populated and 
AppBuilder Applications will not be accessible or available. 
   
Q00937327, Q00940757, and Q00986040:
CallPilot automatically runs audits on a nightly basis. It has been 
identified that a condition exist were the Version Manager audit 
will fail to complete successfully, leaving the Notification 
Server consuming more than 90% of the available CPU.

Q00959966:
Two new events were added in the audit routine indicating the successful 
start (55045) and completion (55046) of the Version Manager audit. 
This change is in conjunction with Q00937327


3. List of CRs that are fixed by this PEP: 
==========================================
Q00996757 Infinite loop in Version Manager because of data corruption
Q00982422 AppBuilder Applications inaccessible and unavailable after SU03 was applied
Q00937327 Notification server consumes more than 90% CPU
Q00959966 Events 55045 and 55046 added into Fault Manager


Installing the PEP:
===================
This PEP is intended to be installed on CallPilot 2.02 (2.01.27.05) 
servers that were installed with or upgraded to Service 
Update 3 (CP20127SU03S).

This PEP replaces the following: 
--------------------------------

 - CP202S03G17S

The replaced PEP will be automatically uninstalled when CP202S03G22S is installed.

In order to install the PEP:
----------------------------

 - Launch the runme.exe to start the installation of the PEP.
   The runme executable can be found in the PEP's root directory.
 - Reboot is required after installation.

Note:
    Some dialogue boxes may appear during the replacement of obsolete 
    PEPs currently on the system. They can safety be ignored.
    Please click OK to continue.

Uninstall:
==========
Go to Start>Programs>CallPilot>System Utilities>PEP Maintenance 
Utility. Click Show PEPs. Select CP202S03G22S, and click Remove.

Reboot is required after uninstall.
