mounting/enclosure possibilities

standoffs/screws/spacers (if needed)/acrylic top and bottom
-can use the same design for the top and bottom
-four options
 -use unthreaded standoffs with self-threading screws meant for plastic - 25 cents/hole
  -1000 essentra 35HSP009 @ 6.85 cents/each (direct from elantras)
  -2000 #6x3/8" or so, plastic tapping, mcmaster 94629A670 8.7 cents/each
 -use unthreaded standoffs with self-threading machine screws - 38 cents/hole
  -1000 essentra HS-6-6 or HS-6-7 - 16 cents/each
  -2000 6-32x3/8" or so, self tapping, mcmaster 11 cents/ea
 -use threaded standoffs with machine screws - 21 cents/hole
  -1000 essentra 14HTSP210 @ 16 cents/ea (direct from elantras)
   -3/4" length
   -6-32 threaded, female-female
  -2000 6-32x3/8" or so, mcmaster 90272A146 @ 2.5 cents/ea
 -use spacer with long machine screw and nut @ 14.38 cents/hole
  -stackup
   -screw >=1.385"
   -lock washer .065"
   -plexi .120"
   -nut .100"
   -PCB .065
   -spacer .750
   -plexi .120"
   -lock washer .065"
   -nut .100"
  -1000 bivar 9905-750 4.4 cents/ea
  -1000 6-32x1.5" mcmaster 90272A157 @ 5.6 cents/ea
  -2000 6-32 nut mcmaster 90480A007	@ 1.5 cents/ea
  -2000 lock washer mcmaster 91101A007 @ .69 cents/ea
  


plastic rivets/acrylic top and bottom
-identical top & bottom design with cutouts for connectors and pins (which will mean the bottom has cutouts that expose pins)
-need big plastic rivets to get through two 3mm layers of acrylic plus 1.6mm board (7.6mm total)
 -essentra 27PIF0056 about 4-5 cents/ea


modular jacks
-LCSC
 -RCH RC00139
 -Ckmtw(Shenzhen Cankemeng) R-RJ11R06P-A000
 -CONNFLY Elec DS1133-01-S60BPS
